Having problems with your Canon PowerShot SD1400 IS IXUS 130 Digital Camera ?

The lens in not retracting on my canon powershot sd 1400 is ,when I press the on /off button

Answers :

Fixing a Lens Error on a Digital Camera
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Canon PowerShot SD1400 IS IXUS 130 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The lens in not retracting on my canon powershot sd 1400 is ,when I press the on /off button

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera

I am having problems with my Canon PowerShot SD1300 IS IXUS 105 Digital Camera. when i am in the playback mode, looking through pictures, the screen will cut off at the last picture (when instead, it should just go straight to the first picture). the lens does not retract and if i press the on/off button, the camera turns back on, but then cuts off again whenever i'm trying to look through pics. I can't figure out if I need to send it back and exchange it or what. Please help me, thank you!

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

Lens restart error on my Canon Powershot A460. Lens has come out and shutter cannot be closed, inspite of battery & card being removed from it. How ever many times I tried switching ON/OFF button after loading my recharged(may be partially charged) battery, it's not showing signs of recovery. Just one beep sound , a blue screen written Canon & a black screen written "Lens Restart error" comes alternatively according to the pressing of ON/OFF button.In this alternative cycle, for one cycle, a gre

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A460 Digital Camera

Hi there, I have a Canon IXUS 90 IS - the lens is extended out and won't retract when pressing the 'on' button. The camera only makes a 'turning sound ' from the motor ( I asume the motor), but the actual display in the back reads' Lens error, restart camera' The nearest camera specialist for Canon are a good 600 and 1400 km's away respectively ( I live in Durban, South Africa)so would like to rather try fix this myself before paying, most likely a similar amount to buy a new camera. Any suggest

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera

My frind dropped my camera and my lens broke. It is a canon powershot SD600. When i turn it on it says lens error, press reset button. lens is stuck slanted-ly.it also is blurry wen u c the screen. "my friend" doent want to pay for it , so where can i go fix it and how much would it cost ?

Hi Dear,As we can see from your description of your problem. The issue is related to misalignment of the lens. As the lens is stuck it will not come in and out smoothly. And also as you have said the camera lens is broken. Hence, the best ... Canon PowerShot SD600 Digital Camera

When you press the power on button the camera lens starts to move out stops goes in then out again stops the screen does not illuminate at all.IF you then press the power button the lens tries to retract slightly but then stops and again nothing else happens. battery is fully charged. if you press the replay button screen and camera behaves as normal and you can view the pictures taken lens usually retracts all the way to its docked position again if it was nearly all the way out.

... Sea and Sea UNDERWATER DIGITAL CAMERA DX-1G Scuba Gear Cameras

My Canon PowerShot SD780 IS will not turn on. I purchased another battery to make sure that wasn't the problem and it isn't. I have tried pressing the power button and OK button simultaneously for a few seconds and that hasn't helped. The power light doesn't turn on, the lens doesn't open, it doesn't even beep. I desperately need help and would really appreciate any advice. Thanks, Vanessa A.

... Canon PowerShot SD780 IS / IXUS 100 IS Digital Camera

Hello, I have a Canon powershot SX100 IS, and everytime i turn it on it beeps and says on the screen "lens error, restart camera". I have tried tapping it, shaking it a bit. turning on and off. Put in new batteries, taking memory card in and out. Turning it on at different angles. Connecting to the computer. But nothing is working, it wont even let me look at the photos when i press the play button, and that doesnt even require opening the lens! please help! thankyou.

Try these procedures. ... Canon PowerShot SX100 IS Digital Camera

Press pwr button the lens extends lcd screens is on for 3 sec. then go's out and lens will not retract press pwr button again lens retracts and extends right back out.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Kodak EASYSHARE V1253 Digital Camera

I have a Canon PowerShot SX100 15, and when I press the button to turn it on, it beeps 3 times and the message lens error restart camera comes on, and then it shuts itself off. I put new batteries in it, that didn't help.

Hello, Your camera's problem is the lens itself. There is something making it stuck, this problem can't be repaired. Take it to Canon or a reliable camera store to get it fixed. ... Canon Digital Cameras

My Canon PowerShot A85 switches on the lens rolls out as per normal. The screen is normal, showing whatever you are poiniting the camera at. However the the Red LED below the flash is permanently on, the zoom lever is not active. Pressing the photo button gives no response. The LED above the screen is permanent orange.This is any mode. I have changed the memory card as a precaution as well as the batteries.

The function switch may have come loose or is faulty ... Canon PowerShot A85 Digital Camera

A345 lens often does not open when power button is pressed. By pressing the power button the 2nd time, then pressing it the 3rd time, the camera seems to work normally. This is with used or fresh alkaline batteries. Shometimes the camera makes a short buzzing sound when the lens retracts. Have also had problems with the zoom lens not operating consistently.

Dear Gdlora,\015\012\015\012First get it serviced... There is a mechanical problem in your Gadget. Your cell lens has slightly disposition due to which you are facing this problem.....\015\012\015\012Every time you try to open lens it pu ... Digital Cameras

Brand new (one hour old) Canon Powershot A490 looks like it has a software bug. All the buttons used to work but now no button responds except fpr the left button when one of the two bottom buttons (camera and menu) is pressed. Pressing one of the latter then pressing the left button constantly cycles through the menus.

Obviously, you have a defective camera. Don't try to fix it or you may void the warranty....send it back. ... Canon PowerShot A490 Digital Camera

Canon PowerShot A480 won't take photo. Pressing on button camera on then pressing silver button to take photo when pressed down screen turns black no picture taken. Batteries new. This is the story; camera was working fine then showed low battery bought new batteries took couple of photo's showed low battery again. Replaced battery same thing again but now when pressing button to take photo screen goes black. Camera bought 30/9/2009. Any idea's????

Its just a matter of batteries...some are not powerful enough to operate the camera ....Try to change them and buy some real good ones..like Duracell or Tatra...do not make any compromises when buy the batteries...get the best cause these kinda camer ... Canon Powershot A480 - Silver Digital Camera

I have a Canon Powershot S3 IS and I was looking at picture I had taken and the lens was retracted. I switched to the camera mode and the lens started to come out and hit my leg and stopped half way. The lens went dark. I turned it off to retract the lens and then turned it back on. The lens came all the way out but the screen is still black and I could feel the camera and just barely hear it making the noise it makes when the lens is coming out but it was already all the way out. I switche

Format ur memory card ....and replace the cells.....might work...contact the customer care for help ..they mightr be able to fix it ... ... Digital Cameras

I have a casio exilim EX-Z200. it turned off with the lens partly exposed. it would not retract fully. i tried turining it on but it turns off again with the lens still partly retracted. it makes a somewhat like vibrating sound when the camera tries to retract the lens (while it turns off by itself). i cannot also view my photos since it won't turn on. i tried turning it on-off, removing battering and sd card and pressing the on/off, green and red buttons at the same time but none of these wo

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Casio Exilim EX- Z200 Digital Camera

Canon SD4000 camera, when hitting the power button, the screen remains black screen, the green light blinks twice, lens zooms out, shutter opens. Screen remains black, and I do not seem to have any control at all; pressing the zoom button doesn't move lens, no notable reaction to anything. Hit the power button again, the lens zooms back into it's original position, shutter closes (occasionally does not shut completely), green light blinks twice, screen remains black. Tried turning on w/o SD card

... Canon SD4000 IS IXUS 300 HS Digital Camera

Lens is open and won't retreat back inside. I turn the power on and makes a funny clicking noise like its trying to retract the lens back in. After three seconds of this it says "lens error, restart camera". Its a canon powershot SD790 IS digital elph with image stabilizer. Canon PC1261...don't know if that helps.

I've had similar problems with various versions of this camera. Here's the fix, if all else fails. These are step-by-step instructions to take apart and fix the camera's lens error. http://johnsmouth.wordpress.com/2010/12/01/lens-error/ ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera

The lens will not retract. A message says "lens error, restart camera," but the camera will not restart. The camera is a Canon PowerShot S3 IS. I can hear a "whirring" or motor noise when I try to start it, but the lens will not retract and it will not take photos or allow you to review photos. Batteries are just fine. I imagine it's the gears, but I wish I could have it repaired for not a lot of money.

Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon PowerShot S2 IS Digital Camera

My lens on my Canon IXUS 105 is stuck open and when I push the on/off button I get an error message which says: Lens Error Will shut down automatically Restart camera I can't view pictures, I can't press any of the buttons... I'm not sure where the restart button is. It's a very new camera, I only got it 2 weeks ago. Please help!

Hi,This is a common problem on this set. The lens error is common for cameras with telescoping lenses.\015\012\015\012You can help the motor by connecting the AV cable --- this keeps the LCD off and not d ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

Have a 20 month Optio E 40, today tried to switch on, lens woundnt come out, used the manual and switched on while holding arrow button, Playback piture showed in display, pressed half shutter to switch back and error message Lens error 113,0,0,0 appeared, Pentax want £80.00 minimum to look at it, can you help pleaseregards Terry

Try to take out the battery and put it back in. ... Digital Cameras

Describe hi, i have a canon powershot a520 that was left in someone's purse when she gave it back to me the lens is now sticking half way out and when i push the power button it blinks on for a split second immediately shuts off. is there a simple fix for this or is it a major problem Canon PowerShot A520 Digital Camera Problem

Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot A520 Digital Camera

Kodak V1003 A few weeks ago, shortly after I'd taken a pic, the lens refused to retract and the camera switched off. It has never been dropped or had anything spilled on it. Strangely, when I press the button furthest left the camera comes on, allows me to view pictures on the card, set the time etc - everything except take pictures. Again when I try to switch off, the lens does not retract. Does this not suggest a software glitch of some kind?

No, unfortunately that is a problem with the hardware, software would not prevent the lens from retracting.\015\012\015\012If it is within manufacturer's warranty (usually 1 year) take it to any Best Buy they will send it out to the mfg f ... Kodak EasyShare V1003 Digital Camera

Canon powershot SD700 IS len retract problem - Canon PowerShot SD700 IS Digital ELPH / IXUS 800 Digital Camera

... Canon PowerShot SD700 IS Digital ELPH / IXUS 800 Digital Camera

Camera was repaired once because lens wouldn't retract. Now lens will extend, and when you press the off button it will retract but bounce right open again and turn off. It isn't possible to take pictures at all.

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Kodak EasyShare One Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2831 seconds