Having problems with your Canon PowerShot SD1400 IS IXUS 130 Digital Camera ?

My cannon ixus 130 is permanently blurred, i have tried resetting to factory setting using the menu

\015 My Ixus 130 was working fine but now it has permanently blurrd photos and screen. I have used the menu to reset it to factory setting but with no joy. Is there a 'hidden' factory reset function. I don't think it has been damaged or dropped.\015

Answers :

Time for a new camera. There is no reset hidden or otherwise.
Repair Help & Product Troubleshooting for Canon PowerShot SD1400 IS IXUS 130 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My cannon ixus 130 is permanently blurred, i have tried resetting to factory setting using the menu


Time for a new camera. There is no reset hidden or otherwise. ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera

I have a DSC-T10 and the screen does not display any of the menu features. It is has vertical lines across the screen. I would try to initialize it using the set-up menu but can't access it. It is not under warranty and costs to much to send it in for repair...any ideas of what I could try? I did try to reset by holding down the power button for 15 seconds while battery is out but nothing changed.


Hi,There could be 2 Reasons :-1. Bad CCD Sensor 2. \015\012Bad PanelTo Differentiate, Try to Look the Saved images or the \015\012Saved Video's. If you could see them without any Problem, CCD Sensor is \015\0 ... Sony Cyber-shot DSC-T10 Digital Camera

Flash has stopped working on my Nikon D40. I've tried a factory reset, tried to get to the flash setting but that menu option is no longer available (highlighted) in any mode. I'm thinking it's broken and not a setting thing. Everything else works fine and it still takes pictures just without the flash. The flash pops up when needed but no flash obviously.


There's a common problem in the flash arm. I found this link that shows a simple repair. If you use this and make the repair yourself, understand that you will void your warranty if you have one. Also, do not touch the bulb as you'll get oil on it ... Nikon D40 Digital Camera with G-II 18-55mm Lens

I'm trying to shoot HDR photos using my XSi/450D. From the menu two I've set the AEB EV step range as 0, -2 and 2. From here, though, I don't know what to do. If I go directly from the menu to shooting, I don't get any automatic shots, but rather single, individual shots based on the current exposure settings. Help. I've scanned my 45D manual, DVD tutorial, etc. and cannot find my missing step to create a series of AEB shots. Many Thanks, Robert


... Canon Digital Cameras

Over exposure The exposure settings on the camera have suddenly become fixed - I can't change them either through fixing shutter speed, OEV, or any other settings. Even tried a factory reset by selecting 'initialize' from the menu, but the problem persists. High or low exposure settings are visible on the viewfinder (i.e. changing the settings shows the picture getting darker or lighter on the screen), but once the picture is shot, it's fixed at an overexposed state.


... Sony Cyber-Shot DSC-HX7V Digital Camera

I have a Fuji FinePix S5100 that used to take great pictures. Now, all pictures are out of focus, including macro, regular and telephoto. I have tried using a tripod and not using a tripod. There is no difference. I have reset the camera to the factory settings and cleaned the lens. Nothing helps.


The problem here is the tiny motor that focuses the lens is not working,( this is a common failure on all digital camer's) the focus movement is inside the camera not anything u can see, it moves the internal elements ... Fuji Digital Cameras

I did not use my camera for 3 months when i get it to use the picture is blurd. even the screen is not ok there is like fire. i tried to format and reset the factory setting but still doesn't work.


Hi,I\015\012 am sorry to hear regarding the trouble. This is a common problem on \015\012these models. It is either a faulty CCD sensor or LCD panel. If this is a\015\012 problem while taking new images,however old images are still ... Olympus Stylus 820 Digital Camera

I cannot turn the flash back on. When I push on the lightning bolt button nothing happens, the display shows the flash turned off. Is something wrong with the camera. I have not had it that long and just use the IA mode and I know it worked before; can I reset the camera back to factory settings? I tried all the other modes and was able to use in in C1 but then I was messing around with that and now won't work in that either. Thank you for your help.


... Panasonic Lumix DMC-FZ28 Digital Camera

I bought a camera from a friend, Olympus e-420. but when i started to use it, i always got dark picture even the flash is already switched on. i'm thinking the built-in flash is delayed, do i have way to make it more accurate? i also noticed when i take pictures it always save's as ORF file. how can i change this settings to a different format? i already tried restoring the default settings but why can't i access the Custom Reset option on the menu bar?


There are multiple reazons for the picture to look dark, a very short exposure, or a low flash intensity.\015\012Try changing the flash intensity, this is done by pressing the Exposure compensation and flash button simultaneously.\015\012 ... Olympus E-420 Digital Camera

Yashica ez digital 6032- 6 mp camera.. i got one sparingly used yashica camera... with above spec... which shows trouble when taking stil pictures outdoors... indoor pictures and video indoors n outdoors are fine. but when taking stills outdoor mainly in daylight condtions... resulting pic is over exposed and blured...with white light...i tried adjsting the setting and i have reseted to factory settings... but the same problem remains...pls help me


Yashica ez digital 6032video indoors n outdoors are fine.but when taking stills outdoor mainly in daylight condtions...resulting pic is over exposed and blured...with white light...i triedadjst ... Digital Cameras

Black screen i own a canon digital IXUS 800 IS and when i turn it on to auto or manual the screen is black with the icons white as normal and photos turn out black-tried pressing disp. button which worked for a while but now it just turns the icons off - tried resetting to factory settings and no change i help - please - dennis mannina - london


If your camera is still under warranty, the best thing you can dois to take it to the nearest official repair shop and Canon Digital Cameras shouldfix it for free.If your camera is out of warranty, or if Canon refuses to rep ... Canon PowerShot SD700 IS Digital ELPH / IXUS 800 Digital Camera

After dropping the camera, all pictures show purple glow where white is supposed to be. Sometimes it returns to normal when using the zoom. I tried resetting to factory settings, but to no avail, the very bright purple color stays. (in lcd and in end result on sd card.)


Http://www.usa.canon.com/cusa/support/consumer/digital_cameras/other_powershot/powershot_sx2 ... Canon PowerShot SX 200 IS Digital Camera

Hi there. I have an Olympus E-510 that is about 3 years old. It's been working fabulous until just until recently. I connected the camera to my computer and downloaded some photos just like I always do with no problems - disconnecting it as I always do (USB). The next time I went to use the camera, the USB storage screen shows up and I can't get it to go back to the original setting to take photos. I can still download any images from the camera but can't get off that menu. I've tried the reset


I'm not really sure what's going on, but it could also be a hardware problem, or maybe ribbon connector inside the camera from the usb port to the main board, or maybe a bent pin in the usb connector.\015\012Check it out carefully, and remove t ... Olympus EVOLT E-510 Body Only Digital Camera

I have an Olympus E300 and I don't know what I did but when I turn on to take photos now the display shows "0" photos available to shoot even though I've essentially cleared all images off; and when I press the button to shoot it will not snap. I have tried the factory reset ( P setting, w/ open FC door holding playback and ok etc etc ..) and this has not helped. Help! Thanks....Sandra


Hi Sandra,\015\012\015\012I would suggest that you format the card in the camera.\015\012You will need to insert the card in the camera and then go into the camera's menu system and choose format.\015\012\015\012In case ... Olympus EVOLT E-300 Digital Camera

The viewfinder of my Nikon D80 is grayish and blurry when it's off. I cant see a thing when I tried to use my 18-135 mm lens. I don't have a battery to reset it to its factory default settings. Do you think there's something wrong with the camera or the viewfinder is always blurry and grayish when it's off. I have owned D40 earlier and I could play around with the viewfinder even when the camera was off.


Hi,\015\012There is chance that your settings are just off . Set your settings to AUTO and then try again to view in viewfinder .If you sre still unlucky then there is some problem in camera ,You need to take to service center to get it service ... Nikon Digital Cameras

Hi, i was wondering if you know how to restore my sony cyber-shot DSC-t77 to its factory settings? My camera use to take really good pictures but now the pictures are all blurr you cant tell what they are...and my camera is touch screen and the alignment is off soo i cant get into the menu to try and fix it..is there anything i can do?


It's a lens problem - the lens sometimes gets debris in between and does not extend out enough to take clear pictures or the lens is crooked from impact or damage. As for the touch screen and not being able to read the menu on your screen, that's al ... Sony Cyber-shot DSC-T77 Digital Camera

Hi, Touch-screen on the DMC-FX500 has stopped working properly. Sometimes a firm, confident touch will activate a menu button, but generally the touch-screen does not respond. Is this a mechanical error or is firm-ware upgrade worth doing? I reset the camera to its factory settings and tried to perform the touch-screen calibration but it won't respond to my finger or stylus.


... Panasonic Lumix DMC-FX500 Digital Camera

I used to be able to take 1000+ pictures on external memory card. Now I'm trying to take pictures and it will only allow me to take 9 pictures but on the camera memory. I have reset the camera to factory settings and also purchased and inserted a new external memory card and I cant to taking pictures via the external memory card. Do you have any suggestions??


With no card in the camera, go into the menu and find "format"...follow the on-screen instructions to erase the internal memory. Then, insert your card and do the format thing again (This will erase your card so if there are pictures on it, download ... Olympus SP-565 UZ Digital Camera

I have been trying the settings on a Lumix G2 digital camera and I would like to carry out a factory reset can you tell me where I find it on my menu. Thanks


"reset" is in the set-up menu. ... Digital Cameras

I am using an Olympus E-500. and am trying to use the built in flash, set to one eight or to one sixty fourth of normal output, to trigger an external flash unit. The camera is set to "Vivid", manual, auto focus, and iso 100. From the "manual flash" menu I should be able to select either full, 1/4. 1/16 or 1/64 of the output. However, those choices never light up. I keep cycling through the first two lines of the menu and never reach the third line with the light output options I want. P


You should consult a Professional Photographer / Cameraman or contact the Customer Care of the Company. ... Digital Cameras

I am trying to get my camera back to the factory settings but everytime i go menucardset then go tocustom reset setting it jumps over it and goes straight to picture mode. I cannot get it to highlight custom reset setting.


There may be another "reset" in the menu that will do what you want. Search for it. ... Olympus EVOLT E-500 Digital Camera

Our D60 used to take great pictures. I only use it on Auto since most are pics of people or still objects and really I don't know to use all the settings. All of a sudden, the shutter speed is now very slow and all pictures are blurry. I have read the manual to adj settings and tried to reset it. Nothing is working. What can I do to fix this?? Please help! Thank you


... Nikon D60 Digital Camera

I have a Kodak Z1015IS, about 16 months old, that has not been subject to any type of liquid or damage. One day I went to use it and I was not able to adjust any of the PASM settings (i.e. f-stop, shutter speed, etc.). All other hardware and menu systems work just fine, it is just that the settings are locked in place (at the levels of my prior use). I've tried updating the firmware, formatting the internal memory, and removing the battery with no luck. Just spent time with Kodak, and a


Kodak is right, they don't release any type of technical information about there products to the user, the only ones that can get parts or tech support are the repair centers, sorry but that is just the way they do things, this is not just Kodak it i ... Kodak EasyShare Z1015 IS Digital Camera

I have two years old Sony DSC S 750 Digital Still Cemera. Suddenly it is producing photos with small Horizontal Lines. I have tried to restore the factory settings and tried with different settings. But, it is still giving pictures with horizontal lines. I always keep the battery away from the cemera when it is not in use. I never mis handled and dropped the cemera. Please tell me how to fix the problem.


HelloThis will be caused by the CCD sensor beginning to fail. The CCD sensor is how the camera sees. When it begins to fail, you will get distortion in your images. You could opt for a repair, but it would be more cost effe ... Digital Cameras

I have a Coolpix Nikon L1 and everything works fine with the camera except when I try to transfer the pictures over to the computer. It used to let me but I would still have to run them through other programs because it never automatically comes up like it used it. I have already tried going through the set-up menu on the camera and did everything it told me to and it still does not work. Any solutions?


If you're using the software provided, there may be settings for automatic download. Check the pc settings of the software you're using. ... Nikon Coolpix L1 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3474 seconds