Having problems with your Canon PowerShot SD300 / IXUS 40 Digital Camera ?

My canon sd300 will not turn on

\015 I have triued new batteries, even tried to connect it to the computer it just wont turn on.\015

Answers :

I had the same problem, and finally I took it to a camera repair shop and they said it was time to get a new one.
Repair Help & Product Troubleshooting for Canon PowerShot SD300 / IXUS 40 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Canon Poershot sd300 digital elph. It just wont turn on period.

Try this: with the battery installed and battery door open, take a pencil, fine tip screwdriver, or anything long and skinny and push the tip of it into the little nub circled in the picture here. There's a spring inside that little nub... keep the s ... Canon PowerShot SD300 / IXUS 40 Digital Camera

My canon sd300 will not turn on

I had the same problem, and finally I took it to a camera repair shop and they said it was time to get a new one. ... Canon PowerShot SD300 / IXUS 40 Digital Camera

My canon sd300 will not turn on

... Canon PowerShot SD300 / IXUS 40 Digital Camera

I have a Canon Powershot SD300. It got in contact with water by accident and now I can't turn it on. The memory card is still working. So now I don't know if it's the battery, the camera or both that is busted. I need help!

Remove the battery immediately before you short the mother board ...... ... Digital Cameras

My Canon PowerShot SD300 will not turn on even with a fresh battery.

Your camera sounds like it will need to be serviced by Canon. You also may have the option of upgrading through their loyalty program for deep discounts.Give the tech support a call and find out. If you are out of your one yea ... Canon Digital Cameras

My Canon Power Shot SD300 will not turn on even with a fresh battery in it.

Here are some simple things to try first for a camera that won't power on. They won't work for every case, but they're worth a try:\015\012 ... Canon Digital Cameras

Canon sd300 will not turn on

... Canon PowerShot SD300 / IXUS 40 Digital Camera

E18 my canon powershot A150, got the whole E18 problem, it turns on with the blue canon screen, but then two seconds after it turns into a faded black with E18 in the bottom left hand corner. i seriously dont know whats wrong, and it hasnt even been a year since i got the camera, is there any way i can fix this problem? because at the moment buying a camera, my parents would not be too pleased :| it turns on with blue screen then it goes black and it says e18

E18 is the canon fault number for lens error. Is the lens stuck out? does it click when the camera is switched on? Try lightly tapping the lens on a hard surface. This sometimes resets the lens. If all this fails take it to bits! (but watch the flash ... Canon PowerShot A400 Digital Camera

My Canon xti stopped working at my son's graduation. I had a full battery and took a few photos.....then turned it off.....and when I turned it back on again, it was completely dead. Tried several charged batteries and still nothing. Won't even turn on! This is a rather expensive paperweight right now. Is this a defect of Canon xti??

Hiyou might have a problem of either main pcb or power control pcd (dc/dc convertor). it is common but it cost. It cause usually come from loosen screw going around inside and short. If it is lucky, then your unit would just a fuse brown. If not, ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

Canon Powershot SD300

... Digital Cameras

Canon eos rebel won't turn on, charged the battery, replace and it would turn on but if you turn it off it won't turn back on. Took the battery out and replaced it would turn on until you turn it off again, then it won't turn back on. What do you think?

Went through the same thing. Ended up sending it back to the Canon repair depot. Evidently this is a common and rather annoying problem with the Rebels main board power section It is covered under warranty so it is best to check for coverage and get ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Canon A510 Powershot camera will not stay powered on when I turn it on in picture-review mode. It comes on for a second --> Canon screen flashes on -- and then shuts off. In picture-taking mode, it seems to be fine. It stays on. But if I switch to review mode, it turns off. I've changed the batteries. It was fine last time I used it, last week. I left it plugged into the PC for a few days, if that makes any difference.

These cameras have capacitors built into the circuitry. A capacitor holds a higher voltage so the camera will operate when in use. Some modes in these cameras do need a higher voltage to work. The capacitor for the review mode is weak and will need t ... Digital Cameras

Canon sd300- bottom latch door broken - Canon PowerShot SD300 / IXUS 40 Digital Camera

If you can't snap it back in, there is a company that sells parts for small consumer style digital cameras : Canon Repair NYC You can order the par ... Canon PowerShot SD300 / IXUS 40 Digital Camera

I have a canon S5 IS. for some reason, i am unable to turn the flash on. i am used ot the process for turning flash on and off on other canons i own (G(, G3, 20D) but this one does not let me do it at all.

Hi, were you finally able to turn on the flash. I am facing the same problem.\015\012\015\012Thanks, Raj ... Canon Digital Cameras

Daate Stamp We recently lost our Canon A95 camera and replaced it with a Canon A640. We cannot get the "Date Stamp" to work on the menu. We see it listed last on the menu. However the lettering is black (not white like the others) and we cannot get on it to turn "Date Stamp" on. You Camera User Guide is useless. Please advise how to turn the Date Stamp feature on. Franklin L. Finley at [email protected]

Some functions are not available in all modes.\015\012\015\012You have to select Postcard mode to be able to enable the feature (about Page 35). Postcard ratio is 3:2.\015\012If any other ratio is selected (e.g. 3:4) then if it were ... Canon PowerShot A640 Digital Camera

Canon elph sd300 no sound - Canon PowerShot SD300 / IXUS 40 Digital Camera

... Canon PowerShot SD300 / IXUS 40 Digital Camera

Canon sd300 lens noise

Defective mechanism, You need professional service to fix it, or better give it back asap,  digital camera lasts only for three years working at its best form, I suggest you buy a brand new one and sell it after two years of use. [:0) ... Canon PowerShot SD300 / IXUS 40 Digital Camera

Canon g7 dead wont turn on My Canon G7 wont turn on. I have tried new battery without succes. Please help [email protected]

That's a loose screw issue inside the G7 and the G9 that is common. The best place I know to get help for that one would be camerasandparts.com They just specialize in the powershots and they are awesome if you need help with one of these. Best of l ... Canon PowerShot SD300 / IXUS 40 Digital Camera

My Canon Powershot SD450 won't turn on. I haven't used it in a while but the battery is charged and nothing that I know has happened to it. Help. My Canon PowerShot SD 750 won't turn on anymore. Battery is fully charged, was using it this morning until the memory card was full. Took it home, downloaded the pics to the PC, disconnected from the PC and received a 'Battery Pack' message. So, I charged the battery and now nothing. Is it just broke?

Here are some simple things to try first for a camera that won't power on. They won't work for every case, but they're worth a try:\015\012 ... Canon PowerShot SD750 / IXUS 75 Digital Camera

I used my canon 60D canon camera always and now i turned it on and wanna take a pic it peeps and blinks orange light .. and waits couple seconds before shooting . looks like its turned on autoshoot but i dont know how to change it to normal

... Digital Cameras

Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks. Turn on the camera, camera shows a canon logo, then before turns off it said lens error, restart camera

\015\012\015\012I have a solution posted in doc "nikon s5 s6 lens cover error repair.doc"  uploaded on site http://www.esnips.com/web/papputatiyasStuff&n ... Digital Cameras

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?

\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

My canon sd1100 IS wont turn on , its complete charged . and when i hold down the power button the little light turns green but stop turning green when i let go. and it wont turn on !

... Canon PowerShot SD1100 IS Digital Camera

I have two issues with my Canon EOS Rebel XS. One issue has been acting up for a while: If I turn the camera on and try to shoot, it tells me shooting is not possible and to turn the camera off and on again or redo the battery insertion. The only thing that works is if I take the battery out and in and turn the camera on again. The second problem started yesterday. My camera would not turn on so I thought the battery was uncharged even though I got no message saying that. But after chargi

Hi,\015\012\015\012You may get the ERR XX before (Shooting is not possible, Turn the power switch to off and on again or reinstall the battery) , where XX is the error number..\015\012\015\012Please leave the error numb ... Digital Cameras

Negative effect. I've had my Canon Powershot S3 1S for over a year now. The other day I was taking pictures and it was working fine. I turn it off and set it down. I come back later, turn it on again and the screen shows has white lines that keep flicking over it. I turn it off and take the batteries out. Later I put the batteries back in, turn it on, and find that it is in negative effect. I'm pretty sure that my camera can't do this naturally and I've tried everything to see if I could get it

Have you tried resetting it to factory settings. if no please do it.(refer manual)but if yes please contact us again ... Canon PowerShot S3 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2451 seconds