Having problems with your Canon PowerShot SD3500 IS / IXUS 210 Digital Camera ?

Installation error when I try to load ZoomBrowser EX


Answers :

Repair Help & Product Troubleshooting for Canon PowerShot SD3500 IS / IXUS 210 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Tried to down load pictures from my new A630 to my existing Cannon utilities program. The program would not open. I then took the new Solutions disk and installed the programs. /when the installation was complete I tried to down load the pictures again. When I attemted to down load I got an error message the Zb Module had encountered a problem and had to close. I got the same response when I tried to open the Zoom browser. I tried from the shortcut and by going direct to the programs.


SteveJudy, Uninstall all utilities related to the Camera in question (via add/remove programs within control panel), re boot, and install the utility from the disk that came with your new A630 and give it another try.Good luck. ... Digital Cameras

Installation error when I try to load ZoomBrowser EX


... Canon PowerShot SD3500 IS / IXUS 210 Digital Camera

I have installed the software for cannon power shot A80. when I try to down load I get a "No camera was foud" error message! I have tried rebooting but still get the same error everytime.


Do what the pros do...use a card reader. ... Digital Cameras

DV Driver trial from Eagletron worked flawlessly. So I purchased & installed the registered copy. Now when I try to load the camera I get an error msg, "cannot initialize this camera"......


... Digital Cameras

I am trying to load Olymus Master 2 and I got an error message "Installation operation failed (0001618). Can you please help. Thanks


... Olympus Digital Cameras

I am trying to download pictures from a Canon Pwershot A75 for the first time to my laptop. I have installed ZoomBrowser EX from a CD. Unfortunately I am traveling and don't have access to the CD. When I plug the camera into my laptop using the UB port here is the error message I get a message that states "One of the USB devices attached to the computer has malfunctioned and windows does not recognize it. I followed the wizard to correct the problem and then the wizard tells me that the driv


Try the following:\015\012\015\012Use a different USB port on the computer.\015\012Reinstall the chipset driver for the computer.\015\012Try use any other USB device on the s ... Canon PowerShot A75 Digital Camera

I've installed software onto new laptop & now trying to load photographs from camera, but keep getting an I/O error message & process aborted. What can I do?


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Fuji FinePix S2000hd Digital Camera

USB error my camera has never had a problem trying to load pictures. just recently i have tried to load my pictures to my computer, and it will say connecting to computer for a while and then it wil say USB error. anyway to fix this problem?


Try NOT connecting your camera to your computer. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Samsung S850 Digital Camera

Installed driver kodakeasyshare m863, cannot load pics to computer, says driver did not install properly. when I install driver again, it says it was successful. I try again to load pics and get same message. have a new computer w/ windows 7. it worked before with old computer and windows xp.


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Kodak EasyShare M863 Digital Camera

ACDsee software Hi, Your advice on upgrading Windows doesn't actually help me - i need help installing the camera software! I've just purchased a Pentax Optio S12 as a second camera (my first camera is a Pentax Optio S40). I'm trying to install the ACDsee software that came with the camera. I am familiar with this software as the 1st camera uses it (I already have a version on my computer) When I try to install it, I get an error message saying "Epson Scan cannot be started - do you want to open


Here is the Pentax Optio S12 software:http://www.freedriverload.com/all43095.html ... Aqua Pentax Optio S12 Digital Camera

I cannot download my pictures from camera to computer. Each time I have tried to install software, I get a pop-up saying I need to install Microsoft.netframework 2.0. I try this and get a system error: visual Basic vsa.dd ox080131107 each time. How do I resolve this? I am running windows xp. thanks for your help. I have a Canon Digital SLR that I have never had a problem downloading pictures to this computer.


Solve all your problems by getting a card reader. They always work and you don't need any special software. ... Canon PowerShot A1100 IS Digital Camera

I have loaded the software from disc supplied with my webcam 9000 but keep getting told that upgrades are required when I start my computer. If I say yes upgrade deletes software already installed gets halfway through loading them I get a message error 1702 a problem with the windows installer package requiring a script. Then left high and dry and have to reload the disc.


Completely uninstall everything associated with the initial install of the camera, might require going into the registry and looking for any instance of the camera. Before you try reinstalling, make sure you have the most recent version of explorer a ... Digital Cameras

I was installing my new webcam but it wan't work, i tried to check it thru amcap but give a error say's VIDEO CAPTURE harware was not installed, i tried to reintall the driver but same thing came out.


... Digital Cameras

I tried to ring Vivitar's Leciester number and it said the number was not recognised. . My problem is that I had installed the driver for a vivitar 7100S for the last 2 years on my computer, and it worked nicely. But then I needed to reinstal the driver after an overhaul, and when I tried to get into the computer after the install, the computer threw me into the DOS screen, and windows wouldn't load. Any reason why? or solution? Brian Winder


You mentioned you installed Windows after an overhaul, and I'm wondering if you were having problems with windows before the install, and if the Vivitar install is having anything to do with the present problem (that is to say if you're having memory ... Vivitar ViviCam 3610 Digital Camera

When i conect the video camera to my mac it does not show the video only shows the picture .the video comes in format that is not readable .i have leapeard installed on my i movie which reads and loads all videos but not this. i tried every thing .the message i get is i need to install aditional soft ware.what soft ware they are talking about ?how can i watch and load the video on my computer?


Download Quicktime. It is Apple software that plays .mov files. Just do an internet search for Quicktime or Quicktime player. And the best thing is, IT'S FREE!!! ... Casio EXILIM Digital Camera

Just tried to hook up my camera to my computer and the computer is not recognizing the camera for some reason. Is it possible that the USB cable is bad. I am not getting an error message and we have done this many times without the software installed. We installed the software that comes with it and it wn't allow us to do it either. We just downloaded norton antivirus 2009 to our computer and this is the first time we have tried since doing that. I think the USB cable is bad but it's pretty new.


I think the USB cable is bad or ur USB port might be loode.. ... Canon PowerShot S5 IS Digital Camera

Hi I have a Fujifil finepix j10 camera and am trying to download pics from my camera to my pc for the first time. However it is taking ages to load them, it says it should only take around a minute but they just dont seem to be loading. Ive tried re-installing the software but its not helped.


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Fuji FinePix J10 Digital Camera

Hi, I've just purchased a Pentax Optio S12 as a second camera (my first camera is a Pentax Optio S40). I'm trying to install the ACDsee software that came with the camera. I am familiar with this software as the 1st camera uses it (I already have a version on my computer) When I try to install it, I get an error message saying "Epson Scan cannot be started - do you want to open the troubleshooting assistant" If I say yes, the troubleshooting assistant opens (but there doesn't seem to be anything


... Aqua Pentax Optio S12 Digital Camera

The camera will only work witha 1GB memory card, we have tried to install a 5GB memory card and the camera shows "memory card error" yet when we try to install the same memory card in another camera it works fine.


SD and SDHC cards fit the same slots, but many cameras won't work with the SDHC (high capacity) cards. SDHC is not backwards compatible. Anything over 2GB is SDHC. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

I have a Brica DigiArt F80, 12.0 Mega Max Digi Cam. I am trying to have my photos transfered to my computer and edit them, However my computer does not have have my camera's drive installed that is why I'am trying to down load the software. Could you please assit with my installations? Thankyou Elias - Wewak - Papua New Guinea


... Digital Cameras

Memory card error - After taking about 300 pictures on a 2 Gig Kodak SD memory card. I get a message on my Canon camera that says '' memory card error'' I tried to put the chip in a differant camera but it tells me to '' Format The Card'' I am afraid if I do that I will loose all of my pictures. I tried to load the pictures into my computer the way I always do and nothing happens. Any helpful ideas ? Thank You


Take no more pics until you've recovered the photos, take the card out of the camera. Here's some freeware photo recovery software th ... Canon Digital Cameras

On my Canon EDS 1100 D Digitial camera I was taking a series of pictures when an error appeared on thescreen Err 20 Shooting is not possible due to an error. Turn the camera off 7 on again or re-install the battery. I tried those instructions but still the error appears - How do I fix the error please


... Canon Digital Cameras

When i try to load photos from my Fuji Camera using the installed software provided (finepixviewer), I select ''load photos'' then, ''from camera'' only to be taken back to the previous menu where i have to select ''load photos'' again. The camera is switched on, plugged in properly AND recognised yet i simply cannot make any progress beyond ''load photos from camera'' can anybody help me?


Just dont use their provided drivers or software. If youre on the Internet and using windows 7 you will always be updated enough for your camera of any brand can download and even altar content to a file on your computer. ... Digital Cameras

Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t


HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera

Format xd card error I bought new Fugifilm xD-Picture card, 1 GB, and putit in camera. Brought up format screen and attempted to format. All I got was "card error!". I thought the problem might be the brand. So, I bought an Olymous xD-Picture card, 1 GB, loaded it into the camera. Attempts to take a picture resulted in "card error!" so I tried to format, with the same result - "card error!'.


Try formatting the card on your pc, connect the card to a card reader, open my computer find the card, right click format, try standard fat first and format. if that doesn't work try Fat 32. ... Olympus Camedia C-350 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2379 seconds