Having problems with your Canon PowerShot SD500 / IXUS 700 Digital Camera ?

Date Stamping I can turn on the date stamping mode, in menu it just jumps straight over.

Answers :

I have just discovered how to correct this - you have to have the resolution set to min postcard setting in order to be able to date stamp your pictures for some reason...
This is possibly as you may not have set the date/time on the camera
Repair Help & Product Troubleshooting for Canon PowerShot SD500 / IXUS 700 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Date Stamping I can turn on the date stamping mode, in menu it just jumps straight over.

I have just discovered how to correct this - you have to have the resolution set to min postcard setting in order to be able to date stamp your pictures for some reason... ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Daate Stamp We recently lost our Canon A95 camera and replaced it with a Canon A640. We cannot get the "Date Stamp" to work on the menu. We see it listed last on the menu. However the lettering is black (not white like the others) and we cannot get on it to turn "Date Stamp" on. You Camera User Guide is useless. Please advise how to turn the Date Stamp feature on. Franklin L. Finley at [email protected]

Some functions are not available in all modes.\015\012\015\012You have to select Postcard mode to be able to enable the feature (about Page 35). Postcard ratio is 3:2.\015\012If any other ratio is selected (e.g. 3:4) then if it were ... Canon PowerShot A640 Digital Camera

I CAN'T GET THE DATE TO TURN ON. IT WILL LET ME RESET IT, BUT IT WON'T LET ME TURN IT ON. When I go into the menu setting, it shows that the date is turned off and I can not access another menu that will allow me to turn it on. I need to date stamp pictures for work. Thanks for your help.

The date/time stamp only works in "Postcard" resolution. Press the "Func Set" button, then scroll down to the bottom to select postcard resolution. \015\012\015\012Then press the menu button. Select the "Camera" menu, then scroll down to the th ... Canon PowerShot SX100 IS Digital Camera

Date Stamp How do you turn the date stamp on? I see it on the menu at the bottom. However, the letters are black and I cannot get to it on the menu. Please advise what I am doing wrong. Franklin L. Finley [email protected] 47-251-9055

Try this and let me know ... Canon PowerShot A640 Digital Camera

I have a canon powershot a560. i would like the date on the pictures. i followed the manual which says turn on date stamp in the menu but it skips over the date stamp so i can't change it. any suggestions?

When you turn your camera on, there is a screen which appears in the viewfinder. Push the FUNC SET button and then scroll down the column on the left of your viewfinder until you come to the one with the letters M1 M2 M3 S, etc to the right. Then sel ... Digital Cameras

The date will not stay set. Every time we turn the camera on it opens with the date screen. We set the date and it then goes into shoot mode but the date is not set. All pictures are stamped with the default start date. Tried a new battery already.

To keep the date on, you have to leave the camera off with a charged battery for 24 hous to charge the inner battery that keeps date on. If this doesn´t solve the problem then is because the inner battery won´t charge anymore, but it wil ... Sony Cyber-shot DSC-W120 Digital Camera

Cannot turn date stamp on in menu settings.

Date stamp is only possible when you set the resolution (picture size) at "Postcard 1600x1200" option, if the date stamp is set to "Date & Time" or "Date" option ... Canon PowerShot A630 Digital Camera

Under the menu I can not turn on the date stamp.I scroll down but it skips the date stamp and gos back to the top. ?

Set the picture size (L, M1, M2, S, postcard) to postcard. ... Canon PowerShot A560 Digital Camera

I have a casio exilim ex s770 and everytime i turn it i have to reset the language, country, time and date etc. how can it save them so when i turn it on it goes straight into camera mode?

... Casio EXILIM Card EX-S770 Digital Camera

Date stamp i can't get my date/time to come up on my pix. as i scroll the menu, it won't even highlight for me to turn on

The date stamp only works with the image size set to postcard (1600 x 1200), not sure why, but that's the way it is. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

How do you turn on date and time stamp on the Canon Powershot SD750. Its grey out in the menu settings

On my Canon this function is only available when the camera's resolution/format is set to Postcard. ... Digital Cameras

How do i turn OFF the date stamp on my kodak M1063? i've been through the menu several times. help!!

Directions to switch the Date stamp off:\015\012\015\012Menu\015\012Camera Settings\015\012Date stamp (logo is like an old fashioned stamp)\015\012 ... Kodak EASYSHARE M1063 Digital Camera

Lumix tz3 Please turn camera off and then on again" as soon as camera is switched on. I Can view any menu, or read SD card, but cannot take any pictures. If I turn on in a picture taking mode it starts to focus and then the message appears, when I turn it off the lens does not close. If I turn on in playback mode, it works fine, if I turn it off from playback mode, then the lens closes. Basically, any picture taking mode triggers the error message. Solution?

Low battery maybe? Try holding camera firmly in one hand, with camera on and in record mode, and strike in on its edge firmly on the heal of your other hand. This technique is often sucessful with temporary camer 'quirks' like freezing, lens not full ... Panasonic Lumix DMC-TZ3 Digital Camera

Hi, I have a panasonic Lumix, DMC-FS5 digital camera. When I turn the camera on and it's on 'photograph' mode, a message keeps appearing after a couple of seconds saying: "please turn camera off and then on again". I get the same message everytime and am unable to take any photos or even access the menu options. There are no problems when the mode is set to 'playback' mode. The images are still there and I can scroll through, as well as access the menu.

Hi,I had this same problem. I have just pulled the lense (not with any major strength) when it was fully extended. This seems to have solved it for me!! ... Panasonic Lumix DMC-FS5 Digital Camera

I just purchased an Olympus Stylus Tough-3000 (T3000). The tech guy at BEST BUY assured me that this camera was one of the few that would actually place a date stamp right on the digital image of my photos...This is the whole reason I purchased this camera- for the date stamp. The date stamp is required by my employer. Please help me figure out how to turn on the date stamp, I'm desperate.

Hi,Olympus Stylus Tough 3000 prints date on image if you connect it directly with printer to get print out of pictures. Printer must have PictBridge mark to receive picture data directly from camera. Usually this type of printer calls photo pri ... Olympus STYLUS TOUGH6020 Digital Camera

Cannot turn on date stamp

The date stamp only works in "Postcard" resolution. Press the Func Set button, then scroll down to the bottom to select postcard resolution.\015\012\015\012Then press the menu button. The date time stamp selection should now work. Simply turn ... Canon PowerShot A620 Digital Camera

How do you turn off the date stamp from appearing on the photos?

Please spend some time in the menu item referring date stamp, date,record,time if you catch off that item.For taking 3 pics ,You might have switched on the MULTI in the menu in camera or shooting mode ... Pentax Optio S5i Digital Camera

Date Stamp I am unable to add a date stamp through the menu. That row in the menu is darkened/unavailable.

U might see that there are several modes of shooting the pictures...one of them is L = Large, M1, M2, M3, S, PostCard, WideAngle..Date stamp can only be used in only PostCard mode... ... Canon PowerShot A610 Digital Camera

I can't view advanced options. The date stamp on/off button has vanished. My Polaroid i634 has been restored to original settings, and now iconc/buttons are no longer there. How do I turn the date stamp off, or view hidden icons to get the date stamp option back. [email protected]

I turned it on, and pressed the video/live recording button that was next to the trash/delete button. That is a whole other menu. After pressing the video/live recording button, I just went up to the first selection, "Program." That takes it off the ... Polaroid i634 Digital Camera

Date stamp I try to highlight the date stamp option in the startup menu but it skips right over the option. How do I get the date stamp to function?

In order to use the date stamp option, the image size (L, M1, M2, M3, S, Postcard) has to be set to Postcard. Press the Func/Set button, scroll down to the image size icon (lower left corner), then scroll over to Postcard, and press the Func/Set butt ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

How do i turn on the date stamp on a cannon powershot a 560

... Canon PowerShot A560 Digital Camera

My goPro hero HD is stuck at "tel" mode, after i hooked it up to a TV. I have tried some forum-solutions with no luck what so ever! When I turn it on it shows the normal "film" menu, but after 3 sec. it turns back to "tel". When it is in "tel" mode, I can't turn it off, the camera simply behaves as it is connected to the TV. To turn it off I have to plug it in to the USB and back out, or disconnect the battery. Thank you for your assistance. - Will this problem continue, or is it just a

... GoPro Digital Hero 3 Digital Camera

Cannot turn date stamp off and date keeps resetting

Try removing battery from camera then wait 10 seconds before installing. This action resets camera.\015\012\015\012If no work, locate your camera software version. Procedure should be in manual, else could probably find it in a google sea ... Panasonic Lumix DMC-TZ3 Digital Camera

When I turn on my camera in camera mode, it says memory full. I go to the middle selection to delete some photos and the camera freezes. It won't go to menu, it won't go back to camera mode or video mode. It just freezes. I can't even turn it off unless I take out the batteries. It is a Concord 4363Z model. I think it has a reset button but I am not sure how to use it. I can't find my manual for this camera. Thanks.

Go online and google search for \015\012\015\012Concord Camera Eye-Q 4363z Digital Camera owner's manual. You should be able to download a copy fro ... Concord Camera Eye-Q 4363z Digital Camera

I received a canon powershot as a gift last year and am just now really starting to use it. The pictures seem fine, but the it seems like I am frequently requested to put in the date and time (i.e. about every 2nd or 3rd time I turn the camera on). Is there somethign I can do to get the camera to retain the date and time? It is sort of annoying that I can't turn it on and take a picture quickly since it won't let me take one until I have entered the date and time. Also, I don't think it is stamp

There is a button battery in your camera (CR1220) that remembers the date and other settings when you remove the main batteries. It probably needs to be replaced. It's in a slide-out holder next to the AA batteries (see page 184 in the manual). ... Canon PowerShot A590 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2703 seconds