Having problems with your Canon PowerShot SD500 / IXUS 700 Digital Camera ?

Lens is open and will not close - Canon PowerShot SD500 / IXUS 700 Digital Camera


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Canon PowerShot SD500 / IXUS 700 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lens is open and will not close - Canon PowerShot SD500 / IXUS 700 Digital Camera


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SD500 / IXUS 700 Digital Camera

The lense is stuck and cannot open and close - Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera


I wouldn't touch it myself. I think you should better consult with a technician, as any slight damage may cause further faults, and this will not be covered by the warranty ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

Shutter will not open when you turn power on - Canon PowerShot SD500 / IXUS 700 Digital Camera


This could be due to some dust particles trapped in between the shutter blades. Please take it to the nearest authorized service center. ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Canon has announced a problem with some of the CCDs used in its digital cameras and camcorders which causes images not to appear or appear distorted. This is due to a malfunction that means the wiring in the CCDs may come undone if exposed to high temperature or high humidity. The affected cameras are the PowerShot A60, PowerShot A70, PowerShot A75, PowerShot A300, PowerShot A310, Digital IXUS V3, Digital IXUS II, Digital IXUS IIs. Canon advises anyone experiencing these problems to contact them


Oh it's more than just the cameras you list, and also includes some video cameras.\015\012\015\012Canon will fix these for you for free if they're experiencing symptoms of CCD failure (black, lined, discolored, or distorted images). This ... Canon PowerShot A70 Digital Camera

Digital camera says sim card locked - Canon PowerShot SD500 / IXUS 700 Digital Camera


Remove the SD memory card and you see there is a small locking switch on the card which is used to protect your data. Slide the switch away from the locked position. If already unlocked then slide it fully to locked and then firmly back again. ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Lens error, restart camera - Canon PowerShot SD500 / IXUS 700 Digital Camera


OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local garage Get them to fit the triggered air blower tool to it.Blo ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Want to reset camera to factory conditions - Canon PowerShot SD500 / IXUS 700 Digital Camera


Go into the setup menu and scroll to "reset"...follow the on-screen instructions. ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Cannon SD 600 lens error restart camera - Canon PowerShot SD500 / IXUS 700 Digital Camera


Go to this website for the solutions:http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Canon sd 1400 - shutter is not opening - Canon PowerShot SD1400 IS IXUS 130 Digital Camera


If you mean the lens isn't coming out, try these procedures. ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera

E18 error canon powershot30 after drop off - Canon PowerShot SD500 / IXUS 700 Digital Camera


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Canon PowerShot SD500 / IXUS 700 Digital Camera

How to repair a Canon s95 lens error - Canon PowerShot SD500 / IXUS 700 Digital Camera


See http://www.fixya.com/support/r13011856-lens_error ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Lens wont close,camera makes a beeping noise - Canon PowerShot S330 / IXUS 330 Digital Camera


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot S330 / IXUS 330 Digital Camera

Lens stuck open and will not open or close - Canon PowerShot S2 IS Digital Camera


Here are a list of Trouble-shooting steps for you to try out,1Remove the batteries, then remove the memory card. Then install the new batteries, when you turn it on it should come back to life. Error E30 means you don't ... Canon PowerShot S2 IS Digital Camera

How to restart camera - Canon PowerShot SD500 / IXUS 700 Digital Camera


I'm guessing that you are seeing "lens error, restart camera" on your LCD screen. Unfortunately, restarting the camera (turning it off and then back on) rarely fixes this problem. ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Lens error canon - Canon PowerShot SD500 / IXUS 700 Digital Camera


Try the procedures in this tip. ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Lens cover does not open E18 code shows - Canon PowerShot S400 / IXUS 400 Digital Camera


Problem in lens unit repair the lens unit ... Canon PowerShot S400 / IXUS 400 Digital Camera

It wont turn on and the lens are open? - Canon PowerShot SD750 / IXUS 75 Digital Camera


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot SD750 / IXUS 75 Digital Camera

E18 lens not coming out - Canon PowerShot SD500 / IXUS 700 Digital Camera


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot SD500 / IXUS 700 Digital Camera

How to fix lens error?.. - Canon PowerShot SD500 / IXUS 700 Digital Camera


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Black screen - Canon PowerShot SD500 / IXUS 700 Digital Camera


This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot SD500 / IXUS 700 Digital Camera

How to do a close up shot? - Canon PowerShot SD750 / IXUS 75 Digital Camera


\015\012If you mean you want to know how to zoom (bring distant things closer): on the back of your camera (on the screen's side), near the top, there will be a couple of buttons marked "T" (meaning Teli: brings clos ... Canon PowerShot SD750 / IXUS 75 Digital Camera

How to use/set the self-timer? - Canon PowerShot SD500 / IXUS 700 Digital Camera


In the shooting mode press down on the multiselector (marked with a one-armed clock) repeatedly to cycle through the self-timer modes: Off, two-second, and ten-second. ... Canon PowerShot SD500 / IXUS 700 Digital Camera

E18 error message lens will not retract - Canon PowerShot SD500 / IXUS 700 Digital Camera


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Canon PowerShot SD500 / IXUS 700 Digital Camera

How do i replace the lcd screen - Canon PowerShot SD500 / IXUS 700 Digital Camera


Its cheaper to go on e bay and get another 1 camera i mean ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Viewing screen is mostly black - Canon PowerShot SD500 / IXUS 700 Digital Camera


... Canon PowerShot SD500 / IXUS 700 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6372 seconds