Having problems with your Canon PowerShot SD500 / IXUS 700 Digital Camera ?

I have a Canon POwershot A85. E18 message is coming up. Lens goes out and in when power turned on but then several beeps and 'e18' message appears...


Answers :

Hello

The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.

Use\012\012\012\012\012\012\012 these at own risk as it may further damage the camera.

Firstly ,\012 try connecting your ac adapter or usb cable.

Try holding the \012shutter button while switching on the camera.

Look at the lens , \012and if some of the lens 'circles' is misaligned or not concentric then \012try wiggling it (while holding camera lens down).

Try gently \012pushing or pulling the lens when it extends but this is risky as it may \012cause the lens barrel to slip out of its guidance system.

Another\012 way to do this is to place the camera lens down on a hard surface and \012then power it up. Be sure to use a soft cloth or something similar as to\012 not scratch your lens or casing. Let the lens push the camera up and \012down a few times and sometimes the little resistance provided by the \012camera is enough to get things going again.

Try hitting your \012camera near the lens on the body with the soft tissue on the palm of \012your hand.

Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to \012replace the camera.

If it is still under warranty I would suggest\012 you take it in before trying any of these steps and remove any \012off-brand batteries or accessories as some stores are really fussy about\012 warranty repairs on camera's with non-brand accessories.

You can also have a look at THIS link.

Hope\012 \012the advise is useful. please do not hesitate to let me know if you need \012any further assistance. Also, please be so kind to let me know if you \012found this helpful.

Regards
Andrea.
Repair Help & Product Troubleshooting for Canon PowerShot SD500 / IXUS 700 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Canon POwershot A85. E18 message is coming up. Lens goes out and in when power turned on but then several beeps and 'e18' message appears...


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Canon PowerShot SD500 / IXUS 700 Digital Camera

When I turn the camera on, the lens goes in and out several times. Then the message comes "turn the power off and on again". I tried taking the battery out, pressing the power button for 15 sec etc., but this doesn't help. Is there anything else to do ?


Hi there this is Lens guide pin problem. 99% chacHi there please follow the steps and let me know the result.\012\0121. Ensure batteries are fully charged & clean the battery connector point in side the battery compartment.\012\0122. ... Sony Cyber-shot DSC-W170 Digital Camera

My camera was working fine and then it gently rolled on to the rug and then it never worked right since. I got the code in the corner of the display E18 and I cannot do a darn thing with the camera now. Should I just chuck it ? ??? Its a cannon power shot A400. (When I turn it on the display light comes on and it beeps numberous times and then the E18 signal comes on and then it goes away and the camera turns off. I do not even think the shutter opens up ) The batteries are charged so what now.


... Canon PowerShot A400 Digital Camera

After turning on the camera, the lens goes in and out about 3 times, then a message appears: "Turn the power off and on again". I do that and still get the same message.


Problem in lens unit repair or replace ... Sony Cyber-shot Digital Camera

I have a SONY Cybershot DSC W150. When I turn it on the lens goes kut and comes back in several times, then I get the error message "Turn the Power Off and On Again", but doing that does not change anything. This is one of four digicams I own (also a Nikon D90, SONY DSC F717, and a Canon) and I like the W150 for some purposes because it is compact and has a viewfinder, not just a screen. I have been unable to find a similar camera. What can I do to fix the problem? Gerry Meisels [email protected]


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\01 ... Agfa Cyber-shot DSC-W150 Digital Camera

When I turn the camera on it says access , the lens goes in and out then I get a beep and message reads turn the power off and on again. I've done this over and over again and it still won't work.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\01 ... Sony Cyber-shot DSC-W30 Digital Camera

When powering up my cyber-shot N50, the lens extends and retracts several times, then a message appears, "Turn the power off and on again" I can download to laptop, took battery out, charged up and put back in.


Hi, \012 \012 The exact steps can be provided with the correct model #. The model # starts with "D". ... Sony Cyber-Shot DSC-F55 Digital Camera

I have a Canon PowerShot A400 digital camera. when I turn the camera on, it acts like it is going to turn on, then it starts beeping and the screen goes black. It has the message E18 in the lower left corner of the screen. I changed the batteries, but it is still doing it.


Please see this post:\015\012\015\012http://www.fixya.com/support/t102982-e_18_problem\015\012\015\012Good Luck!\015\012\015\012Brian ... Canon Digital Cameras

Upon power up, display screen says 'access', lens goes in and out several times and then the camera beeps and display says 'turn the power off and on again'


Your problem may be due to weak/worn out batteries or corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything el ... Sony Cyber-shot DSC-W70 Digital Camera

When I turn the camera on it says access , the lens goes in and out then I get a beep and message reads turn the power off and on again. I've done this over and over again and it still won't work. Any sugestions?


One thing to test before going to repair, make sure you are using a fully charged and correct battery for your camera.\015\012If so, the camera will need repair. This is a common problem and can be fixed. Teleplan Camera Repair does a great job ... Sony Cyber-shot DSC-W30 Digital Camera

When i turn on my cybershot, the lens extends and retracts several times, then the screen goes mostly black and a message appears telling me to turn off and back on.


Same thing happened to my camera. I have the same camera. I fixed it though. I know what I'm about to say sounds idiotic, but bare with me. If you turn the power to the camera on, and catch. or grab the lens when it has fully extended and don't let i ... Sony Cyber-shot DSC-W120 Digital Camera

Canon A400 Hi, I have the above camera (canon power shot A400) and have just solved the E18 error by tapping the plastic A/V out cover - THANK YOU ! However, now, although the camera turns on, lense extends and I get full working order - after a few minutes I get the message 'Change batteriers'. and the camera dies. I have now put in several new batteries (including the little(cr1220) but the same message keeps coming up and the screen and the whole thing dies after a few seconds. Is this a furt


Having using standard LR6 batteries in a Canon before you will only get 3 or 4 pics max before it drains the batteries. You really need high power AA's like 2300mAH+ rechargeables for any good performance or Lithium AA's ... Canon PowerShot A400 Digital Camera

When the camera is switched on the lens goes in and out twice and then the message that appears on the screen is 'turn the power off and on again'


Hi, \012 \012 Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolv ... Sony Cyber-shot DSC-W50 Digital Camera

My Nikon Coolpix S203 has a "lens error". Every time I turn on the camera, then lens goes crazy, moving in and out and zooming in and out of focus, all the while making a beeping noise. It then retracts back into the camera and the message "Lens error." appears on the screen. Please, is there anything I can do to fix this? Thank you.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Nikon Coolpix S203 Digital Camera

Zoom Error My camera will no longer turn on. When I press the power button, I get a few flashing lights, and then after a while a "Zoom Error" message appears and the camera starts beeping. I have replaced the batteries to no effect.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Olympus Camedia C-5500/C-55 Sports Zoom Digital Camera

My camera was dropped accidentally while capturing a image. After that i switched off and when I switched on for next snap, display shows access and after few seconds a message appears saying" Turn the power off and on again" I did this several times but no effect and even i removed the battery and inserted back still no use. Please help.


I am a technician who repair any electronic devices, i repair digi cam a few hours ago, foreign object or dust is not the cause of that error, digi cam has 3 lenses, 1 is outside lens, 2 is is the swinging lens and 3 is the retractable lens,... do no ... Sony Cyber-shot DSC-W55 Digital Camera

Turn the power off and on again....this is what appeared after i download some pictures to my computer for the first time. When I do this the same words appear on the screen and I am unable to take any pictures When I turn on my Cybershot DCS W90, A message sayes 'turn the power off and on again' the lens does not open and I can't take photos but can see photos stored on memory card.... what do I need to do to fix this?


I have a Sony P32. Found the answer on another board'\015\012Hit the front of the camera where the lens is on carpet a couple of times. I jars the problem loose ... Sony Cyber-shot DSC-W100 Digital Camera

Faulty d40x hi i bought a d40x off ebay the other day and couldnt wait to start snapping.... problems: - The error message "initialization error. Turn camera on and off again" appears. Upon turning the camera off and on again, the same message appears. After several times trying it still does not work. Also, the menu screen appears, and just keeps flicking from menu to menu constantly. As well as this, on the playback mode, the picture of the image displayed keeps zooming in as far as


I would start by looking at all of the push buttons on the camera. One may be stuck down. ... Nikon D40x Digital Camera

When I turn the power on my Sony DSC-P200, a message comes up "access" which fades out. Then it clicks several times and then another message pops up saying "turn power off and on again". I get the same sequence when I turn it off and on again. Any suggestions on correcting the problem?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Sony Cyber-Shot DSC-P200 Digital Camera

Sony cyber-shot dsc-w300 when turn on the power, zoom works several time and "turn the power off and on again" message comes with black monitor. But, it does not work still after trying several times.


I have got the same issue any replies please let me know as the camera is only about 18mnths old and hardly used.\015\012sorry cant help at the mo rang sony they said they can send it to sony for £115 but a new camera is not much more and ... Sony Cyber-shot DSC-W300 Digital Camera

When i turn on power the word "ACCESS" appears on the screen for 5 seconds. then the words, turn the power off and on again, appear with a beep and a flashing orange light near the view finder. I can look through the dsaved pictures and use the menu functions, but cannot take new pictures.


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Sony Cyber-shot DSC-W50 Digital Camera

Camera was on, working fine. When powering off, telescoping lens did not retract so lens remained extended just a bit with lens cover open. Waited a few minutes, turned it back on and I get the "access" display message then the beeps and (turn power off and back on) message. While off, I have removed the battery, replacing it with a fully charged spare and it still does this. The lens tries to telescope a little bit and retracts a touch, but I can't get the camera out of this mode. Can it be res


Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera

Error Message Hello! Every time I turn My Sony camera on it starts beeping and and giving me the error message "Turn the power off and on again." I've tried turning it off and back on, along with taking the battery out and putting it back in and even pressing the reset button and I'm still continuing to get the same error message. Any ideas on what I can try next?


I have the same problem ... Sony Cyber-Shot DSC-L1 Digital Camera

Power doesn't work properly. When I turn off camera with power button, lense stays out. When I turn on, the lense goes in then back out again, but after a few seconds, I get the message: "Please turn camera off then on again." If I don't do anything, the camera will turn off by itself, and the lense will go in. Battery is fully charged, and nothing dramatic happened to start this problem...


HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Panasonic Lumix DMC-FX8 Digital Camera

I have a sony cybershot DSC-W150, and for some reason, when i turn the power on, the lens opens and closes several times, then a message pops up on the main screen reading;"turn the power off and on again", and as i proceed to turn it on and off, it will not let me take a picture, any suggestions?


Hi, Lens requires manually restting. If you in the U.K , I can help you out.p.m me at [email protected] ... Agfa Cyber-shot DSC-W150 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2749 seconds