Having problems with your Canon PowerShot SD500 / IXUS 700 Digital Camera ?

Canon ixus 70 give me problems regarding it's flash. Im not sure what to do perhaps you can help me with the problem or the settings please. My flash does not work when i put the auto flash on i

\015 Please can you help me\015

Answers :

Repair Help & Product Troubleshooting for Canon PowerShot SD500 / IXUS 700 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Canon ixus 70 give me problems regarding it's flash. Im not sure what to do perhaps you can help me with the problem or the settings please. My flash does not work when i put the auto flash on i


... Canon PowerShot SD500 / IXUS 700 Digital Camera

I can not get the auto flash to work The screen shows on the left: iso auto, a box, M1 on the right the flash symbol A, auto, steady hand symbol, 1375 I try to take a picture and the camera won't take unless I turn off the flash. I have tried to change many settings in the function area, but I can not figure out what I accidentally changed in the first place. please help me to get my camera to work in the auto mode again


I have this same exact problem. When you say "repair it," how? ... Canon PowerShot A720 IS Digital Camera

I am having SONY DSC W80 7.2 MP camera. since long back it was not in operation. now to day when i using it its flash not working properly. sometimes flash works sometimes not, some times photo comes dark sometimes very bright even if it flash is on auto mode or in always on mode. kindly advise is it any setting problem or technical problem.


There is problem with flash unit.you have to replaced flash unit.if you know that how replaced then buy from your near service center and replaced by opening your camera.if do not know then best to replaced by sony service center. ... Sony Cyber-shot DSC-W80 Digital Camera

The flash has been working fine until last night when I tried to take a picture and the flash was set to auto. When I press the button the little red light beside the flash sign lights up, but the camera does not take the photo. When I set it to flash mode, it still won't take a photo. When I turn off the flash, then it does. What could be the problem? Is it in the settings?


If your batteries are weak, the flash will not have enough power to flash and will prevent a picture from being taken. ... Nikon Coolpix S210 Digital Camera

Flash Followed all instructions word for word and the flash will not work. I reset the camera to the default setting and flash still will not work. If I look at the camera and take a picture it looks like it try's to flash but just can't pull it off. What is the problem? Help me please


Well tO qet tha flaSh dere iszx an buttOn \015\0120n the CaMera \015\012u just k33p prEssiinqq it untiill yuqh qet tha tiinqqq\015\012with the flaSh tiinqq and an eye neXt 2 it\015\012=] ... Polaroid I533P Digital Camera

My Canon EOS Rebel XS digital camera has suddenly stopped taking pictures. It will not focus even though it is on the auto focus setting. The first set of numbers are flashing and there is a flashing dot behind the ISO 800. It was working fine when I used it one time and then the next time it wouldn't. I can view pictures, but cannot take them on any setting except A-DEP and it's not focused even then. Please Help!


Try cleaning the contacts on the camera body and the lens where they meet with a cotton swab lightly dampened with rubbing alcohol. ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

I have cyber shot DSC-S730 even though setting is set for flash on or auto, flash doesn't work. Symbol on the bottom left appears, but I don't have a manual to troubleshot. Can someone help?


... Sony Cyber-Shot DSC-S500 Digital Camera

Flash Problem i have an A630 which i assume is quite similar. a couple of weeks ago the flash stopped working, i thought it might've been the batteries but i have since changed the batteries with no improvement. wat happens is when i go to take a photo with the flash on or auto the lightning bolt symbol on the screen just flashes and wont take a photo until i turn the flash off. i took it back to where i got it from but they were no help


Hello!\015\012The flash circuit is failing.Southern Photo Technical Service is a Authorized Service Center for Canon.We do service the camera model you mentioned and the standard cost to Clean, Lube, Repair and Adjust all functions ... Canon PowerShot A620 Digital Camera

My Pentax K10 is not working. Upon switching on,no response at all, after few seconds batt indicator show up on the small lcd window at the top. Nothing could be seen on its LCD MONITOR, shutter, auto focus and flash is working. Just like dead set except for some functions mention above are working. Help please. Thanks in advance


... Pentax *ist DL Digital Camera

Hi I have a Canon PowerShot A460 and normally do notn have any problems at all. For the last few hours I cannot take any photos outside - all I get is a white screen. I can however take photos inside with the Flash. I realise that I have possibly changed some settings by mistake and have tried to set the camera to works settings but nothing has changed - I still cannot take photos. Can someone help me please??


Go into the menu and find "reset"...this will restore the original factory default settings and may solve your problem. ... Canon PowerShot A460 Digital Camera

Not really sure if this is a problem? I have an Olympus E-500 and E-510. When I changes settings on the E-500 (ISO, White Balance, Auto-Focus Mode etc.) it remembers them when I switch it off. The E-510 doesn't. Is it supposed to work this way or is there an obscure setting I need to change? It remembers the time and date and the quelity settings ok. Thanks in advance for any help you can give me.


If you are shooting in the Auto mode and make the changes when power the camera off it will reset back to factory defaults. If you change the dial to P mode, make those same adjustments and power the camera off and then on again it should maintain t ... Olympus Digital Cameras

I have a Sony cybershot DSC-W200 12.1 megapixels. It has been working brilliantly, then i turned it on one day and it will not allow me to change any of its settings, even in the manual setting. In auto i can not use flash or micro settings. What has happened and how can i change it back? I have searched through all of its menues and i cant find anything that helps.


Take out the battery and let sit for 10 minutes. reinstall battery and turn back on. everything should be back to normal ... Sony Cybershot DSC-T200 Digital Camera

Manual mode I bought a G9 and so far I'd had no problems but I tried to use the Manual Mode and found that the pictures it takes are almost black... I went over every setting, tried diferent sensibilities but I cannot find the problem. In the other modes Auto, P, Av, etc, it works perfectly fine. Can anybody help me?


I presume that when you select Manual Mode you are then selecting a suitable aperture and speed and ISO to give you a correct exposure? If you are then I guess this is a problem for Canon to sort out.\015\012Sorry if I'm teaching you to **** eg ... Canon PowerShot G9 Digital Camera

Error 5 ! Canon Rebel Xti w/ 28-135mm It was working fine! had it for 10 day's and after about 560 images taken ( 4 gig flash card ) The message read : "The built in flash auto pop up was obstracted... turn it off and on again..same problem. any simple tip ? solution ? or take it back to the dealer. I appreciate your Help ! Peter Toronto


\015\012Try the scotch tape or masking tape technique: get around two to three inches long sticky tape, stick about an inch above the flash housing, turn on the camera, hold the remaining tape upward , shoot the came ... Digital Cameras

Blurry Vision Now that I had help resolving my access problem, my next problem is that my picture view is blurry. When looking at the view screen, it is blurry. I think that it is set on auto focus but its not working.


What are you looking at on the screen?\015\012Before or after the shot?\015\012The this point the taking sequence-point camera at scene look in screen blurry image - half press the release - autofocus comes into play- press all the way picture take ... Sony Cyber-shot DSC-W30 Digital Camera

I have a Canon Power Shot A720. Outdoor photos are beautiful. Indoor photos are always grainy/blurry...a lot of noise. I have tried the ISP feature but there are only two choices... 1. Auto or 2. High ISO Auto Either setting, the indoor photos are grainy. Further, there are times when my flash will not work. It won't work on Auto setting or when I try and "force flash" it. No flash and the photo will not allow a picture to even be taken. Any suggestions? Thanks


This is probably the solution:\012 Wont take pictures with flash ... Canon PowerShot A720 IS Digital Camera

My flash has stopped working for some reason - I tried to use it yesterday and all of a sudden the camera takes pictures without the flah. I went on the flash settings and made sure it was set on Auto and then tried to take the picture again but no flash still. I then set the flash to go off on every picture but still the flash did not go off I would like to know how to get the flash working again Thanks


Either your batteries are weak or your flash is dead. ... Olympus FE-210 Digital Camera

My Canon G9 has suddenly developed a few problems: the flash choise is off or automatic, no "on" for fill-in. Also, the scene setting has stopped working and there is no video option - it just takes still pictures as if always on "Auto". Any ideas?


... Canon PowerShot G9 Digital Camera

I have canon a640 camera. I am getting problem regarding taking pictures as the flash is not working. I have tried it on Auto mode, Portrate, landscape and others the result is same. Please help me in this regard.


Make sure the dial at the top of the camera is set to AUTO or the green camera icon. When you are in position to take a picture, press the left button on the circle pad on the back of the camera; it should look like a SQUIGGLY ARROW this is the sign ... Canon PowerShot A640 Digital Camera

Vivicam6300 out door photes to light and grainy has been okay until recently indoor photos with flash not to bad all photos taken on the auto setting even on manuel just the same .any body help me with this problem cheers john


... Vivitar ViviCam 3750 Digital Camera

Dv 5500 i have a dv5500 digital camera since new i have had a problem with the ok button when i try to advance picture display the button performs a different function only when i press the right sideof the button left side top and bottum work fine camera seems complicated to set features such as flash at night could not figure that out any help would be appreciated can i send the camera some where in newengland area usa for repair [email protected] jerry fasciano 94 nichols st everett,ma 02149


You need to replace the button board in your camera. Regards ... Mustek DV5500 Digital Camera

My built in flash won't fire in dark sceneries, it worked fine a coupl of hours ago. Every setting is in auto, Is it related to other setings? The camera works fine in bright areas except during the dark due to the flash freezing the shutter. Can I fix this with setting adjustments? I already tried using the master reset but it didn't work.


HelloThank you for using FixYa for your problemAlways check the batteries first but if is it still giving the same fault, your camera is faulty. It should be taken to an authorized repair centre for a repair ... Nikon D60 Digital Camera

Hi, my problem is the flash does not flash. The HS10 is a great camera, which I highly recommend and it does everything and more that I was hoping it would do. The flash worked great and then one day no mas. It just stopped. Any idea what the problem could be, suggestions or what I could try. One day to the next it quit working. Any help would be greatly appreciated. Thank you in advance. Don Bronsema


As I have suggested many times, try resetting all adjustments in the menus to factory specs., or what may also be called default settings, or something like that.Then test the camera again, making sure that the flash settings are set to be used ... FUJIFILM FinePix HS10 / HS11 Digital Camera

The problem is with the flash. When set on “auto” the flash will always go on during the day, when the conditions are great. I always have to set it to off. At night, no matter what settings I have, the camera on, the flash opens and sometimes it works, sometimes it doesn’t. No matter what I do, sometimes it just won’t flash.


Hi there ... Kodak EasyShare P850 Digital Camera

The flash on my Nikon D3000 won't pop up (regardless of the setting) and when I go into "Shoot" (from the guide menue) and then into "Easy Operation" the camera is set at No Flash but I'm not given the option to change the setting and says "The camera is now on "Auto No Flash Mode" but doesn't give me an option to change the setting there either. Can you help?


... Nikon D3000 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2959 seconds