Having problems with your Canon PowerShot SD600 Digital Camera ?

Lens error, restart camera - Canon PowerShot SD600 Digital Camera


Answers :

If ur very sure that the battery is fully charged... first we would advice you to change the batteries and see ...... if that doesnt work... the battery contacts may be corroded or bent and hence not making correct contact with the battery
.... sometimes there cud be dust or sand particles in the lens retraction passage... blow out air in those places..... this cud help a great deal.... I was able to fix a similar problem by wiggling the outermost part of the lens.as its trying to go in....
also try Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
if that doest help
Remove the batteries, then remove the memory card. Then install the new batteries, when you turn it on it should come back to life. turn it off, slip in the memory card and turn it on one last time.
if that doesnt help

Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying the above fixes and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.



Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.


regards
\015\012 iversh
Repair Help & Product Troubleshooting for Canon PowerShot SD600 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Canon Powershot Lens Error Restart Camera - Canon PowerShot SD600 Digital Camera


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Canon PowerShot SD600 Digital Camera

My camera says lens error restart camera - Canon PowerShot SD600 Digital Camera


Your camera has a lens error,\015\012 this\015\012 is such a common fault th ... Canon PowerShot SD600 Digital Camera

When i power on my Canon PowerShot SD600 Digital Camera, it beeps a few times and says, lens error, restart camera. Help!!


Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart ... Canon PowerShot SD600 Digital Camera

Lens error, restart camera - Canon PowerShot SD600 Digital Camera


Needs new Lens Block. ... Canon PowerShot SD600 Digital Camera

It says lens error, restart camera! - Canon PowerShot SD600 Digital Camera


Try these:-\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012shake it.\01 ... Canon PowerShot SD600 Digital Camera

Lens error restart camera - Canon PowerShot SD600 Digital Camera


Open your camera battery lid of bottom and on the lft hand bottom u'll find a switch........pressing and holding that switch try to on the camera......it'll work.......then insert some junk material to hold that switch in that position forever ... Canon PowerShot SD600 Digital Camera

Lens error, restart camera - Canon PowerShot SD600 Digital Camera


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SD600 Digital Camera

Lens error, restart camera - Canon PowerShot SD600 Digital Camera


If ur very sure that the battery is fully charged... first we would advice you to change the batteries and see ...... if that doesnt work... the battery contacts may be corroded or bent and hence not making correct contact with the ... Canon PowerShot SD600 Digital Camera

Lens error my camera model is canon powershot SD770 is digital elph i dropped my camera and a message is displayed as lens error i tried to restart my camera and again the message is displayed as lens error please give me a solution sir please


I've had similar problems with various versions of this camera. Here's \015\012the fix, if all else fails. These are step-by-step instructions to take \015\012apart and fix the camera's lens error. \015\012http://johnsmouth.wordpress.com/2010/12/01/l ... Canon PowerShot SD770 IS / IXUS 85 Digital Camera

Canon Powershot SD600 (elph) won't start. Error code "lens error, restart camera". Restart does not clear message. Removal battery does not help. Lens cover can be openned manually. Is there a way to "reset" this camera? Thanks.


Hi\015\012 What you are seeing is a generic stuck lens error message:\015\012\015\012Your\015\012lens needs to be cleaned, repaired or replaced. There are online places that will do it for a\015\012decent price and there are o ... Digital Cameras

How can I fix this issue with the camera, on the canon powershot sd750 digital elph 7.1..lcd reads lens error restart camera


Try these procedures. ... Canon PowerShot SD550 / IXUS 750 Digital Camera

I have only had my Canon PowerShot SD1400 IS Digital camera since December and all of a sudden whenever I try to turn it on, the lens does not open or move out and I receive an error message saying "Lens Error, Will shut down automatically, Restart camera." I have never dropped this camera and am concerned that it is not fixable. Please help!


It always comes because there is something loose inside the lens, such as a screw.\015\012These articles maybe helpful for you: ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera

Digital Camera Have a canon powershot SD700 IS digital elph ... "lens error ... restart camera" shows in the display and lens will not retract ... any suggestions?


The following blog outlines some repair options for a lens error:\015\012http://camerarepair.blogspot.com/2007/12/fixing ... Digital Cameras

My Canon PowerShot SD1100 IS Digital Elph camera is saying "Lens Error, Restart Camera" what must I do. I have restarted it a couple times and it is still not working. The lens is still not closed. Help.


See Lens Error ... Canon PowerShot SD1000 Digital Camera

Lens is open and won't retreat back inside. I turn the power on and makes a funny clicking noise like its trying to retract the lens back in. After three seconds of this it says "lens error, restart camera". Its a canon powershot SD790 IS digital elph with image stabilizer. Canon PC1261...don't know if that helps.


I've had similar problems with various versions of this camera. Here's the fix, if all else fails. These are step-by-step instructions to take apart and fix the camera's lens error. http://johnsmouth.wordpress.com/2010/12/01/lens-error/ ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera

Turn camera on (Canon Powershot A480 digital), logo comes up, then it says LENS ERROR RESTART CAMERA. However, when restarting camera, same thing happens


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A480 Digital Camera

Lens error, restart camera?! - Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

When I try t turn on my Canon SD600 digital camera I get an error message Lens error restart camera.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Digital Cameras

I have a Canon PowerShot S3 IS Digital camera and just recently started having problems with it....turn it on and receive lens error, restart camera. It just makes a clicking noise and will shut off. I have replaced the batteries since this started and still receive this error.


HelloUnfortunately\012 a "lens error" message is not something that you will be able to fix. This error indicates a system failure and requires the \012camera to be sent in for servicing and repair.\012 \012You may fin ... Canon PowerShot S3 IS Digital Camera

Lens error restart camera on Ixus 870IS - Canon PowerShot SD880 IS / Digital IXUS 870 IS Digital Camera


Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart ... Canon PowerShot SD880 IS / Digital IXUS 870 IS Digital Camera

Powershot A1100 IS error lens restart camera - Canon PowerShot A560 Digital Camera


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot A560 Digital Camera

Lens error, restart camera - Canon PowerShot SD880 IS / Digital IXUS 870 IS Digital Camera


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SD880 IS / Digital IXUS 870 IS Digital Camera

Lens error restart and the camera shuts down - Canon PowerShot SD880 IS / Digital IXUS 870 IS Digital Camera


Hi.Lens error is caused by mechanical faults concerning lens\015\012assembly. This happens because there is dirt inside the lens ( eg.sand,\015\012dust etc), or one part in the lens assembly is faulty or damaged.\015\012As the ... Canon PowerShot SD880 IS / Digital IXUS 870 IS Digital Camera

Lens error restart camera canon sd 750 - Canon PowerShot SD750 / IXUS 75 Digital Camera


\012\012try these:-\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Powershot A1100 IS error lens restart camera - Canon PowerShot A560 Digital Camera


Hi there,Well Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked pr ... Canon PowerShot A560 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4844 seconds