Having problems with your Canon PowerShot SD600 Digital Camera ?

My canon powershot sd 600 will not switch between photo, video and view mode correctly


Answers :

Had same problem and just fixed it! I just turned it off, took the battery AND card out for\015\012a few minutes and then making sure I had it switched to still mode, put\015\012the card and battery back in and turned it on. Working fine again. I\015\012suspect it actually does a 'reset' this way so what seemed to be a\015\012mechanical issue was definitely a software one ...
Step 1: Select the shooting mode to video. (If U can't do this plz see the Quick/full reference guide.)

Step2: Full press the shutter button to start recording

step3: Full press the sutter button to stop recording.

\015\012Regarding how much (time) of video you can record at a one go plz refer\015\012to the camera manual. This depends upon your available amount of space.\015\012There some restrictions when you shoot in video mode. Plz refer to the\015\012guides to understand the restrictions.
Repair Help & Product Troubleshooting for Canon PowerShot SD600 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My canon powershot sd 600 will not switch between photo, video and view mode correctly


Had same problem and just fixed it! I just turned it off, took the battery AND card out for\015\012a few minutes and then making sure I had it switched to still mode, put\015\012the card and battery back in and turned it on. Working fine again. I\015 ... Canon PowerShot SD600 Digital Camera

My Canon Powershot SC1100 IS, Digital ELPH, has always been great. a problem occurred. the camera said, card locked. I took out the SD card and pushed the switch up. then it was ok, except now I cannot use the view finder?? the display one. it works in video mode but not for taking photos. is there a button to press to make it work again?


... Canon PowerShot SD1100 IS Digital Camera

Horizontal Lines I found in my Canon PowerShot S 500, in the screen, the image appearing having horizontal lines in it, in the replay after imaging and replay mode, and after it is on the computer, the lines appear in the picture clearly pixelating the picture horizontaly, while in video mode, no lines appear at all while videoing and viewing the video. in the viewing mode normally before taking the picture, i found that there is very light lines cannot be seen easily, but became clear when i tr


Even am facing the same problem is it due to the problem mentioned in this site?\015\012\015\012http://www.canon-asia.com/index.jsp?fuseaction=image-phenomena_notice ... Canon PowerShot S500 IXUS 500 Digital Camera

Canon powershot A520 doesn't work in camera mode. I can look at and edit pictures in viewing mode, but switching to "camera" won't let me take pictures... in this mode it also lets me view pictures already on card, so something isn't making the switch over.


Hi!\015\012Do other buttons work? If so, the switch could be broken because it sounds it doesn't switch to the CAMERA mode, just stays at the VIEW mode.\015\012If you're not experienced in repairs, you should give it to a local repair sho ... Canon PowerShot A520 Digital Camera

The video camera function on our PowerShot SX100 IS has switched to a feature that seems to be designed for emailing video files. We get a "compact" text box when switching to video, and there's a little envelope icon in the upper right. The problem is that we're ending up now shooting videos that only show up in tiny form, where before we had higher quality, bigger (view wise) clips. Any idea how to switch that Compact feature back to Not Compact (full-size?)? Thanks!


Try putting the camera in video mode, then call up the menu and set the resolution to a larger sized image...that might get it corrected. ... Canon PowerShot SX100 IS Digital Camera

I get (have) a black screen when I put my camera in the on position to take picture/video. I can view all pass picture/video, If I switch mode to view. when I switch the mode to take picture or video I only get a black screen.


Try hitting the display button(the small TV resembling icon in the bottom right of the camera). You may have accidentally pressed it while using your camera and caused it to turn off your display. ... Sony Cyber-Shot DSC-M1 Digital Camera

When I try to view or delete photos, the camera keeps defaulting to the photo taking mode. It goes back and forth between the two functions. When I do manage to view a photo or delete one, it sounds like the camera is actually taking a photo. Could this be a problem with the memory stick? New batteries do not correct the problem.


... Sony Cyber-shot DSC-S600 Digital Camera

Im trying to import videos from my mini dv tape on my digital Video camera JVC GR-290u i plugged in a usb cord from my camera to the computer but nothing came up. when i switch from video mode to memory mode my computer recognizes the camera and i can import photos from the sd card. but i cant find out how to import video from the tape.


As it's a DV (Digital Video) camera you should use the IEEE 1394 Firewire socket if it has one. Then use a DV capture program.If you dont have a Firewire port on your PC you can buy a card like this one which will connect you Camera to your PC. ... Digital Cameras

I have a canon powershot SD200 digital elph camera. The metal piece on the back of the camera which moves the camera between functions (view photos to shoot video to take photo) no longer works properly all the time. Also, the clicker wheel that moves through different menu options or moves through photos being viewed doesn't always work. Are these problems repairable, and if so, where/how/at what approximate cost?


Hi,\012You will have to refer the servicing to a Canon Authorised service center near you. They will provide you with an estimate of the total repairing charges which depends on the extent of damage to the internal parts and the number of ... Digital Cameras

I have a Sanyo VPC C6EX 6megapixel camcorder which, when switched on, immediately takes a photo in 'camera' mode without any prompting. After that, it will not take a photograph in normal operation. I have moved the switch between REC and PLAY and tried both camera and video modes, but neither will respond when buttons pressed. Switch the camera off, and then back on again, and it still takes a picture automatically without warning....! Indeed, the camera seems to be 'confused'?...even in ME


Check if any of the button on your camera is remaning slightly pressed internally.if it is pressed make it proper .also tap the sides of your camera slightly for two minutes.then ON the camera and check out.\015\012if this does not helps.it the ... Sanyo Digital Cameras

Canon Powershot G10 image quality problems... I have had my Canon Powershot G10 for 2 years and have had the same problem from the start... it is now driving me mad! When viewing photos in anything other than the supplied Canon Zoom Browser or Photo Professional the quality is poor. The images are noticeably blurred and appear grainy. I normally shot in manual mode with ISO80 and record images in RAW+JPEG. Processing the RAW photos seems to slightly improve the blur (though it is still there)


... Canon PowerShot G10 Digital Camera

My D80 suddenly stopped taking photos while I was in Auto mode. I noticed the flash stopped releasing. I've changed lenses, reset the camera's green buttons, switched out the card, reset the clock. It will occasionally take a photo, not necessarily in focus,and the flash will on occasion pop, but I can't figure out what the correct triggers are. Can anyone help? Lens is 18-135mm. Set Lens in in "A" and camera is in "AF"mode. Thanks much.


Hi, Also, try a factory reset found on page 129 of the manual. On the left side of the camera is the terminal cover, inside below the USB connector is the reset switch. If that does not work call Nikon digital 1-800-645-6689. ... Nikon D80 Digital Camera with 18-135mm Lens

I have Olympus FE 340 8.0 mega pixel camera. Now, when I switch it on, in the camera mode, the lens opens and closes(zoom in and out) 3 times and getting switched off. In picture viewing mode it is working perfect. What could be the reason for this, Please help me in correcting this?


OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local garage Get them to fit the triggered air blower tool to it.Blo ... Olympus Digital Cameras

'Access' screen? Everytime I switch my camera on, a black screen with 'Access' on it comes up and the camera then switches off. This only happens when it is in the taking photos or recording videos modes, and not in the playback mode. Can anyone help?


The (Access) in the screen refer to one of this problem, the lens mechanism is unable to start due to plastic broken parts in it or dust, or battery poor power, use a rechargeable battery over 1200 uAh of power ... Sony Cyber-shot DSC-S600 Digital Camera

When i try to download my images the camera just turns off. It works in all three settings, (photo, video, review) as long as the usb is not connected, and it works in photo and video with the usb connected, but as soon as i switch to view with the usb plugged in it powers down. This just started out of the blue.


Consider NOT using the USB connection.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Canon Powershot SD450 / IXUS 55 Digital Camera

When camera gets turned on, the lens goes in and out of focus a few times and then screen turns blue and displays "D : 5f08 5e02" and does not go back to shooting pictures again. But for just looking at the pictures on the memory card, it works if turned on in that mode. If turned on in photo-shooting modes, it cannot be switched back to view photos. (OLYMPUS M700)


It's a sensor issue. The error indicates there is a problem on the lens.It may be caused by sand, broken gears or any other foreign object in the lens mechanism.A simple fix is to turn ON camera while holding it with\015\012the len ... Digital Cameras

Broken toggle Hi,  My Canon SD 600 toggle switch will now only take photos. It will not move to video or allow me to view photos once they have been taken. The switch seems to have lost any resistance. Any tips?


I had the exact problem with my SD600, which I had purchased in Jan 2007 (needless to say it was beyond it's warranty). I called Canon and it would cost me $99 just to have it looked at, and then any additional $$ for pars, shipping and taxes. It w ... Canon PowerShot SD600 Digital Camera

Cannon powershot s1 view finder is 100% static picture. Just started doing it. If change from photo mode to view picture mode you can see what picute has been taken. Camera is only 3yr old & had little use. Can you offer some suggestions/advice thanks


Hello,\015\012Carry it to the Canon Care Centre and your camera will be repaired free of cost, its a CCD problem.\015\012Regards,\015\012Joseph Manoj\015\012+91 9352008418\015\012cclinic(at the rate)rediffmail.com ... Canon Digital Cameras

Blurred picture I've been using canon powershot A85 for about 8 months.For the first 5 months i had no problems.Then i stopped using it for about 2 months coz there was no necessity(i removed the batteries and kept it carefully).When i took it yester day, and tried to take photos the picture was blurred.When viewing through the LCD before taking the picture it looks very clear.But after pressing the shutter the photo taken looks blurred and when i view it playback mode again it was blurred.But t


This Service Notice will update Canon U.S.A., Inc.'s previous CCD Image Sensor Advisory, dated October 6, 2005.\015\012\015\012It has come to our attention that the vendor-supplied CCD image sensor used in certain Canon digital cameras and digital vi ... Canon PowerShot A85 Digital Camera

Auto switching to video mode after still photo


Take the battery out and re load the operation.\015\012This will do a reset of the operation modes. ... Sony Cyber-Shot DSC-T1 Digital Camera

When i switch the camera on it says memory card error at the top and card locked at the bottom,i cant view any photos or take any more,when i tried downloading onto pc it says there are no photos on the camera?can i delete photos using the pc or photo printer at my local shop(i have a Canon powershot A470) thank you


Your camera maybe defective in the memory circuit. You can try your card in other A70 cameras? You can format in other cameras as well. ... Canon PowerShot A70 Digital Camera

When ever i press photo click button my camera shuts down. It works fine when viewing photo. Even when i gentel press dat button to go on photo taking mode the camera goes down. Even I can video on clickng the photo shoot button.


Make sure your camera is fully charged. Sometimes when it is almost out of power it will shut down. ... BenQ GH600 Fashion Chic 21X Optical Zoom Long Focus Wide Angle Cameras

The screen comes on in scene and guide mode but when i switch to any photo mode i can't get a view. the little light at the top stays orange. will not take pic


... Olympus FE-170 Digital Camera

I have a canon powershot sx200 IS. I'm trying to upload 2 very important videos to windows photo gallery and it's telling me that the videos are corrupt and showing me the error code 80004005. I can view the videos fine on my camera but they just won't upload!! please help!


Try using a card reader to upload them to a folder you create on your desktop. From there, You should be able to import them to any program you wish.\012 ... Canon PowerShot SD940 IS / IXUS 120 IS Digital Camera

When i take a photo the screen shows white and when i switch to veiw the photo it is also white ,but i have a clear screen when vidio or veiwing to take a photo,i tried hiting the logo and that didnt work My Sony Cyber-Shot DSC-S40 still takes pictures, but I can only get a white light screen and can only take pictures through the view fnder. I took 80 pictures in Malta including three videos and they all came out fine, but I couldn't see them on the screen.


Your lcd is done. sony does a flat rate repair. usually its not economical to fix. new sonys start around 150 ... Sony Cyber-Shot DSC-S40 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2684 seconds