Having problems with your Canon PowerShot SD600 Digital Camera ?

Can I use an SDHC Ultra 8GB memory card in my Canon Powershot SD600?

Answers :

I would say no based on the Canon website information.


You could contact Canon to verify, and they might have a firmware upgrade to allow use of high capacity storage cards.

Repair Help & Product Troubleshooting for Canon PowerShot SD600 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Can I use an SDHC Ultra 8GB memory card in my Canon Powershot SD600?

I would say no based on the Canon website information.http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=145&modelid=12913#ModelTechSpecsActYou could contact Canon to verify, and they might have ... Canon PowerShot SD600 Digital Camera

I've bought a 4GB memory SDHC memory card to my Canon powershot A 430 camera, and when i put it in my camera - it says memory card error. I tried to unlock it by the small button, but didin't help. What should i do? Is there anywhere wherein the SDHC Card can be used on Canon PowerShot A430

The Canon A430 uses MMC and SD cards. While SDHC cards will fit into the slot they are electronically incompatible and will not work. You need to use SD cards, 2GB and smaller. ... Canon PowerShot A430 Digital Camera

When putting a Lexar Multi-Use 16 GB SDHC memory card in my Canon Powershot A540 I get Memory Card Error message as well Card Locked message. Have tried unlocking it by the slide on side of card, is t

It's a lost cause. The A540 works with SD cards. While SDHC cards will fit into the slot, they are electronically incompatible and will not work in devices not designed for them. You need to stay with SD cards, 2GB and smaller. ... Canon PowerShot A540 Digital Camera


Sounds like a card problem. Did you format the card in the camera when you first got it? If not, recommend formatting it using the camera. Look for the format option in the camera's menus. Note that this will also erase all images from the card, ... Canon Digital Cameras

What type of memory card can I buy for my Canon Digital Rebel EOS DS6041 in 2010? Can I use an Ultra CF 8GB card or do I have to use the SD CF and up to how many GB can I use?

HelloOK, this specific unit supports up to a 8GB Ultra CF card.Have a look at the link below. It should be sufficient.Click ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

Will the canon ixus 30 use a 8GB SDHC memory card, as it shows card locked in display

Your camera will accept a maximum SD card capacity of 2GB. It simply isn't capable of handling anything of a larger capacity and in particular is incompatible with the more technically advanced SDHC cards.Your fix is to either replace you ... Canon PowerShot SD200 / IXUS 30 Digital Camera

I'm getting memory card locked error using a 8GB SDHC card in my Canon A410 camera. The slider is NOT set to locked

Are you sure your camera can handle SDHC cards or is it only capable of using SD cards? ... Canon PowerShot A410 Digital Camera

I recently purchased a 32 gb memory card for a Canon powershot sd 700 is Gigital elph. This is the second card I have purchased and I keep getting a memory card error message. The 16 gb card in the camera is a Canon product are there proprietary issues with the use of non Canon cards or is there another problem/

Here's the specs for your camera from Canon. Sorry, but ... Digital Cameras

What's the largest capacity sdhc memory card I can use in my Canon PowerShot A430 camera please?

... Canon PowerShot A430 Digital Camera

Can I use a 16GB SDHC class 6 flash memory card in my "Canon Powershot SD790 IS" Digital Elph?

You have to have an approved SDHC device in order to read those cards.\015\012\015\012The best you can do is 2gb. ... Digital Cameras

When I inserted the new memory card (SanDisk Ultra II, 4GB) into my Canon PowerShot A620, it tells me "Memory Card Error". This is a brand new card. What do I do? It had been working just fine with a SanDisk Ultra II; 2.0GB)

Some cameras cannot handle over 2GB memory cards. If it works fine with 2GB card - stick to that. If some other A620 you know operates with 4GB card, take yours to repairs. ... Canon PowerShot A620 Digital Camera

My Canon Powershot SD450 won't turn on. I haven't used it in a while but the battery is charged and nothing that I know has happened to it. Help. My Canon PowerShot SD 750 won't turn on anymore. Battery is fully charged, was using it this morning until the memory card was full. Took it home, downloaded the pics to the PC, disconnected from the PC and received a 'Battery Pack' message. So, I charged the battery and now nothing. Is it just broke?

Here are some simple things to try first for a camera that won't power on. They won't work for every case, but they're worth a try:\015\012 ... Canon PowerShot SD750 / IXUS 75 Digital Camera

I want to replace the memory chip in my Canon PowerShot SD1100 IS camera with a larger one but leave the photos taken on the original memory card on the camera. I used my computer to first read the photos off the original chip, then to write them back to the larger chip. When I put the larger chip in the camera, it shows no images. When I read the chip with a card reader, I do see the images. I want to be able to see those images on the camera (so I can use it as a viewer to share my photos

Hello.First of all make sure you have a copy of all your pictures in your computer. Then format the new card USING YOUR DIGITAL CAMERA. After that, transfer the pictures to your SD card from your computer and make sure that you did ... Digital Cameras

I just bought a SanDisk Ultra SDHC memory card - 4 GB for my Canon 610 Camera. Previous to this I had a 1 GB card in the camera and it worked fine. Now with the 4 GB card I get a message which says "memory card error" and "Card locked!". When I go to the screen tools screen on the camera, the word format is blanked out and cannot be selected. -- Is this the wrong card for the camera?

Hi,Canon A610 firmware support maximum 2GB memory card and above that limit, memory card error message will appear.Please use up to 2GB memory card in your camera.Hope this info will help you.Thanks. ... Canon PowerShot A610 Digital Camera

I have a canon powershot sx200 IS and I recently went on vacation and took a lot of pictures using teh SD memory card provided with the camera. For some reason, after almost filling the card I received a memory card locked error. I checked the card, it was not locked. I even tried in another camera and same error. So I got a new SD card, took more photos and then all of those photos were erased. I could not find them when reviewing on the camera, another camera, or even with a USB card reader. A

The likely reason this keeps happening is that these cards weren't formatted in the camera when you first got them. However, don't do so just yet as formatting also erases the card. If you are using a memory card, take no more pics until you've reco ... Canon PowerShot SX 200 IS Digital Camera

I just bought a new canon powershot xs20is. When I put in the new 8gb memory card to format it, it said memory card error. My camera won't allow me to go into formatting to format it. Is it a bad memory card or what's the problem?

Did you check the write protect tab on the card? ... Polaroid i1035 Digital Camera

I have a PowerShot Canon S3IS and have encountered a problem whereby I have lost the complete content of my 1 GBSD card. Whilst altering settings on the camera prior to an exposure a message appeared on the camera screen stating"memory card error" "card locked". This is the second occasion on which this has happened - but using a different memory card. The first time I reformatted the card and, of course, lost my all my exposures! This time I have not reformatted. Can you explain why this has

I will venture a guess that your SD card has a lock switch near the top. If you unlock it, I think that will allow you to download your pictures. I think the problem is in the SD card. I'll give it another try if unlocking the SD card doesn't work ... Digital Cameras

Ihave a Pentax *ist DS camera with which I use a SanDisk Ultra II memory card. I have recently bought a SanDisk Extreme III Secure Digital Card (SDHC) CLASS 6 Micromate card which does not work in the camera, please coud you advise if it is possible to use both these cards in the camera? Many thanks. Jill Poppleton

According to this site\015\012\015\012http://www.sandisk.com/Assets/File/pdf/SDHC%20Compatibility_2007-02-15.pdf ... Digital Cameras

I have a Canon PowerShot A520. The memory card is a MMC-16M. I bought a 4gig card and get a "Memory Card Error" message. What size SD card can I use?

On the canon website it gives a table showing the number of images that can be stored on various media. \015\012The Table only goes up to a 512mb card. Here is the link:\015\012 ... Canon Digital Cameras

We have a SVP DC-1231 digital camera (with waterproof case) that we tried to use while snorkeling. We have an 8GB SDHC memory card in it, but after only taking 6 pictures it says the memory is full. It must only be accessing whatever internal memory is available. I have tried, but I can't figure out how to set it to save to the memory card. Can you help? Thanks!

Usually, you must get rid of the pics in the internal memory in order for the card to work.With no card in the camera, go into the menu and find "format"...follow the on-screen instructions. Then, your card should work. ... SVP Acqua DC-1231 Digital Camera

Canon powershot SX100IS gives memory card error for 8GB Cards

... Canon PowerShot SX100 IS Digital Camera

Hello, I've bought a 4GB memory SDHC memory card to my Canon powershot A 430 camera, and when i put it in my camera - it says memory card error. I tried to unlock it by the small button, but didin't help. What should i do?

The A430 works with MMC and SD cards. It will not work with SDHC cards. You need to use SD or MMC cards, 2GB and smaller. ... Canon PowerShot A430 Digital Camera

When i try to format the SDHC 8GB memory card the recording screen display's (Waiting....) for about 1 to 2 second's, then goe's to the normal recording screen and when i push the record button it display's memory full, but the card is new and doesn't have anything saved on it. Can you please tell me what i did wrong, and how to format the card so i can use the camcorder. Thanks For Your Time Dean

Hi, look here's what to do, get yourself, or access to, A Computer, and a USB SD card reader, now, insert your 8GB SD card into the reader/writer, It will show up as a HDD in My Computer, and then, Format it FAT32. Now return it to the Camcord ... Jazz Digital Cameras

Memory card I have a sandisk memeory card I use that is 1gb ultra and i can put that in my computer and it pulls it up right away. But when I use a 4gb or 8gb I can take the pictures but my computer will not pull pictures up or recognize the disk. Is there only certain sizes I should use in my 1285 camera? Once I saw my camera say does not recognize that format? All the san disks I have are brand new as well.

I have looked at the specs for your camera and you should be ok, if you are using SD or SDHC memory cards. As far as the computer you are using to read the cards, not enough info. to comment on that. One possible way to see your pictures on the 4gb ... Kodak EASYSHARE Z1285 Digital Camera

My memory card is locked and i tried everything i have a canon a540 powershot and the memory card is a sandisk 8gb

Have you noticed the slider on the side of the card? This acts as a lock and might have been accidentally moved to the locked position, in which case you could just move it back to unlock again. Hope this helps. ... Canon PowerShot A540 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3101 seconds