Having problems with your Canon PowerShot SD600 Digital Camera ?

How can I turn off auto flash in my canon sd 600 camera?


Answers :

Press the flash button (right-arrow on the control panel, marked with a lightning bolt) repeatedly to cycle through the flash settings. To turn the flash off, select Off, marked by a lightning bolt in a circle with a slash through it.

Don't forget to turn it back on when you're done.
Repair Help & Product Troubleshooting for Canon PowerShot SD600 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My flash is not working on my Canon PowerShot SX110 is camera. Help! My boss thinks the flash is turned off, but when I go to flash settings it says that red-eye and sync are both turned on. Basically I tried to use the camera outside the other night and the camera kept telling me to raise the flash even though the flash was up. The pictures were all blurry. I LOVE camera and am hoping for a simple solution.


... Canon PowerShot SX110 IS Digital Camera

I can not get the auto flash to work The screen shows on the left: iso auto, a box, M1 on the right the flash symbol A, auto, steady hand symbol, 1375 I try to take a picture and the camera won't take unless I turn off the flash. I have tried to change many settings in the function area, but I can not figure out what I accidentally changed in the first place. please help me to get my camera to work in the auto mode again


I have this same exact problem. When you say "repair it," how? ... Canon PowerShot A720 IS Digital Camera

How can I turn off auto flash in my canon sd 600 camera?


Press the flash button (right-arrow on the control panel, marked with a lightning bolt) repeatedly to cycle through the flash settings. To turn the flash off, select Off, marked by a lightning bolt in a circle with a slash through it.Don' ... Canon PowerShot SD600 Digital Camera

Last night was taking photos indoors with flash on auto setting. All appeared fine except thre was a vertical line on the viewfinder, not quite half way across. After about 4 flash photos, the flash turned itself off and it wouldn't allow me to adjust the settings back to flash again. I checked the setting and it was still on auto and there was plenty of battery left. Tried a couple of shots and they took, but no flash, so useless. Turned camera off for half an hour then tried again and it was f


I have similar issues. flash won't fire but pops up normally. cannot adjust flash setting that remains in always off position.\015\012\015\012help. ... Canon PowerShot SX 200 IS Digital Camera

I have a canon rebel xti with an 18 to 55 lens .. I recently bought an external flash to sit in the hot shoe .. now when I removed the flash from the hot shoe .. the cameras own flash will not pop up and work... I can manually pop the flash but it still will not work..  I thought that when I bought the flash at the camera store the sales person turned off something on the camera for the new flash to work.. is there something I need to change in the menus to get the cameras own flash to work.....


I had the same problem. \015\012Look closely at the hotshoe. Inside it, way over to the side, under one of the tabs on the side, is a tiny metal strip. When you attach an external flash, the strip is pushed down and holds down a tiny button ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

Hi, I've just recieved my nikon d90 back from a repair and service, and although everything appears to be working fine, whenever I want to change shooting modes,( auto, P, M, flash off etc), they only work once I have selected them, and then turned the camera off and back on. In other words I cannot be shooting in the Auto mode and then switch to "flash off auto"....all that happens is that the auto focus works but the shutter will not operate. If I switch the camera off and on however, I can t


I'm going to assume at this point that the camera has been serviced correctly. What I'd suggest is that you look in your manual and find where you can reset your camera back to the factory default settings. Okay here are a few thoughts that might be ... Nikon D90 Digital Camera with 18-105mm lens

Hi we bought a vivitar v8324 for our parents for christmas who are not technically minded at all and hoped it would be a nice and easy and shoot, as there is no detailed manual in the box could you please tell me how do we make sure that the flash is on automatic every time they turn the camera on? we keep setting it to be auto flash but each time we turn the camera back on it has turned of again. Is there a manual of some sort that we could download for them as having something in front of them


You should contact Vivitar directly at www.vivitar.com You can e-mail them or call either way they should be ableto get you what you need. I hope this helps. SuperRichard37 ... Vivitar V8324 Digital Camera

Canon A720 IS camera will not take a picture when flash is turned on but will if flash is turned off. I see a flashing flash symbol in the LCD panel (as if it is waiting for the flash to charge) when pressing the shutter and flash is turned on. Batteries are full charged.


This is probably the solution:\012 http://www.fixya.com/support/t2074406-wont_pictures_flash\012 \012 ... Canon PowerShot A720 IS Digital Camera

I can't get my camera to flash or work in the "Auto" mode. I've cleared all of the images, reset the settings and use custom settings. I place the camera on "Auto" and turn it on. It goes into the delay mode for 59 seconds and then goes to sleep. It won't take a picture or flash.


... Moultrie GameSpy 4.0 Digital Camera Deluxe

I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju


Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Canon T3i thinks that there is an external flash attached and will not allow use of the built in pop up flash. I have tried putting on the external flash and turning it off while it is on the camera and literally every combination of the sort to try and see if I can get the camera to realize that the flash is no longer there. Please help....


There is a pin in the hot shoe that operates the external flash switch on the bottom of the top cover. It is probably stuck down - maybe by sticky liquid spillage. Clean with a toothbrush and windex and see if it will then pop up. ... Canon EOS 600D Rebel T3i Digital Camera

The wheel to turn on the camera is very stiff and when it is placed in the auto spot, the camera flashes on, then immediately turns the camera off


The stiff wheel switch will need to be looked at by a camera tech locally probably needs some lube or something sticky got under it or something? But this can be fixed along with your current issue and this agai ... Digital Cameras

Lens inoperative? When camera is turned on, there is no image on the screen, just flashing horizontal lines. It will take a picture and the flash goes off, but the result is a picture of the flashing horizontal lines. Any fix for this? Is the camera repairable? Would we send it back to Canon for repair? What would be the approximate cost? Thank you.


Cost of repair is free with free shipping too! This definitely sounds like it might be a defective CCD imager. If so, Canon will fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Pleas ... Canon PowerShot A75 Digital Camera

AF problem Last week I took some pics that needed the flash turned off. I did that and took the pics with no problem. I turned the flash setting back to "auto" afterwards. (this may not be related to the current problem but does seem too much of a coincidence). Next time I went to use the camera, I got an AF(red dot) and a red hand on the screen. It would take one picture and then would be frozen (no zoom, no picture taking, but the screen would stay on). If I turn it back on I can then ta


Jangles,\015\012\015\012I am having the exact same problem. Have you found a fix ? ... Nikon Coolpix 5600 Digital Camera

My camera turns on to the blue Canon screen, but the lens does not come out.The green light flashes, but the the buttons are not responsive. Then the camera turns off. I have changed the batteries, etc.


Could be some dust particle are stuck in the space betweeb the lens casing and the camera body. Use your vacuum cleaner to pullout the dust. ... Canon PowerShot SD110 / IXUS IIs Digital Camera

When I try to take a photo in portrait mode with the flash on auto or forced on the icon flashes red and the camera wont take photos. After about twenty seconds it comes up saying turn the camera off and on again.


\015\012dear sir,\015\012the first suspect is your battery,which is running in low battery....kindly recharge the battery for few hours and then put your camera on........\015\012next,the pro ... Panasonic DMC-TZ5 Digital Camera

My daughter's canon 1200is was in the bag soaked with water by accident few month ago. After camera was dried out, it seems to function but with sometimes flash is lit whenever she turned the camera off. Now flash and display picture button don't work anymore. I wonder if there is any suggestion or we should buy a new one.


You got it in one,,,its a new one,,,,all that water inside it has shorted out the works,,,\015\012ask santer for one? ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

I bought a used canon xs from craigslist. I think a hard lesson learned already. Anyway the camera appears to be in great condition. The problem is whenever I take a picture it does not come out right. The colors are way off. Some colors look fine, blue will come out beige, gray or green. This is with the flash indoors or outdoors with just normal light and the camera on full auto. I called canon and they said it sounds like the sensor is going bad. Just wondering if anyone has any advic


The experts at Canon are probably right. But, check the white balance and make sure it is on "auto WB". Go into the camera menu and find "reset" to get the camera back to factory default settings. If it still doesn't work, then you probably need a se ... Digital Cameras

My canon a520 is not working properly camera is in held position just canon screen appear after two or three seconds camera auto turn off ........is this ans software problem or something els...


You can proberley get new softwear for it as well you may need to take it in to be serviced ... Canon PowerShot A520 Digital Camera

My Canon Powershot G3 will not respond. When I turn it on a get a rapidly flashing green light on the back, and when I try to connect I get the message on the computer that there is no supporting software. To try to reinstall the software on the camera I uninstalled the Canon software, reinstalled it, and then connected the camera, hoping that the software would reinstall whatever was corrupted or missing. Do you know what is going on? Paul Luyben


... Canon Digital Cameras

Canon 300d flash won't fire. Pops up ok but display just reads "busy" and camera locks up. Must turn on/off to get camera working. External flash works ok.


This may sound obvious, but have you tried to make surer the battery is fully charged and then see'ing if it still does this? The reason I suggest this is that I had a similar problem and when I fully charged the battery this problem went away. I te ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

I have a Canon Powershot Digital camera just over 1 year and we turned it on the screen is all black now(started out 1/2 black-it flashes but no picture is taken- all settings are as they have been since we bought this camera from BestBuy. This is the 2nd Canon Powershot we bought in the past 3 1/2 years & it will be the last one. Can you tell me what I can try to get this fixed? Thank you. Karen from NC


Test ... Canon PowerShot A85 Digital Camera

Flash I took the auto flash off the camera while on holiday to take pics of turtles and now cannot get it to turn back onto auto, please tell me how to do this


Hi - You can download the manual from the link underlined in blue below:PowerShot SX100See page 65: ... Canon PowerShot SX100 IS Digital Camera

Canon A510 Powershot camera will not stay powered on when I turn it on in picture-review mode. It comes on for a second --> Canon screen flashes on -- and then shuts off. In picture-taking mode, it seems to be fine. It stays on. But if I switch to review mode, it turns off. I've changed the batteries. It was fine last time I used it, last week. I left it plugged into the PC for a few days, if that makes any difference.


These cameras have capacitors built into the circuitry. A capacitor holds a higher voltage so the camera will operate when in use. Some modes in these cameras do need a higher voltage to work. The capacitor for the review mode is weak and will need t ... Digital Cameras

My Canon A430 Camera got a bit wet when I fell into a Dam this weekend. The camera did not at all touch the water, but a few drops of water did land on the camera. After drying the few drops off, the camera still worked for the whole day as well as the whole evening, but the next morning the camera did not work. The green light above the screen on the top left does flikker when the camera is turned on (which is normal). I am even able to take a photo and the flash works. Through all of the the s


Apparently, Some water worked its way into the camera circuitry. You need to stop trying to get it to work...you're only making things worse. Remove the card and battery. Bury the camera in a bowl of dry rice for a few days to absorb any moisture. ... Canon PowerShot A430 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4007 seconds