Having problems with your Canon PowerShot SD600 Digital Camera ?

Lens won't go back into the camera - Canon PowerShot SD600 Digital Camera


Answers :

Fixing a Lens Error on a Digital Camera
\012


\012

This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
\012

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Repair Help & Product Troubleshooting for Canon PowerShot SD600 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lens won't go back into the camera - Canon PowerShot SD600 Digital Camera


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot SD600 Digital Camera

I was Importing some pictures to my computer from my Canon sd 1300 is powershot digital camera , When the Battery died , I was not in the room at the time , So I came back in and attempted to turn the camera on and it said "Please change the battery pack" which means I need to charge the battery , and When the camera shut off , The lens did not close . SO I charged my battery , and the next day , I put the battery back in the camera like normal and I turned it on , and on the screen it said "Len


Since your camera is new the priviledge of your warranty claims must not be lost. So do not tamper to lose this benefit but call up the call centre of Canon for registeration/advice. What you can do is to remove the battery and keep if off . Since th ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

Lens is open and won't retreat back inside. I turn the power on and makes a funny clicking noise like its trying to retract the lens back in. After three seconds of this it says "lens error, restart camera". Its a canon powershot SD790 IS digital elph with image stabilizer. Canon PC1261...don't know if that helps.


I've had similar problems with various versions of this camera. Here's the fix, if all else fails. These are step-by-step instructions to take apart and fix the camera's lens error. http://johnsmouth.wordpress.com/2010/12/01/lens-error/ ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera

Canon Powershot Lens Error Restart Camera - Canon PowerShot SD600 Digital Camera


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Canon PowerShot SD600 Digital Camera

I am having problems with my Canon PowerShot SD1300 IS IXUS 105 Digital Camera. when i am in the playback mode, looking through pictures, the screen will cut off at the last picture (when instead, it should just go straight to the first picture). the lens does not retract and if i press the on/off button, the camera turns back on, but then cuts off again whenever i'm trying to look through pics. I can't figure out if I need to send it back and exchange it or what. Please help me, thank you!


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

Describe hi, i have a canon powershot a520 that was left in someone's purse when she gave it back to me the lens is now sticking half way out and when i push the power button it blinks on for a split second immediately shuts off. is there a simple fix for this or is it a major problem Canon PowerShot A520 Digital Camera Problem


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot A520 Digital Camera

I dropped my Canon Powershot SD750 digital camera and the extended lens was stuck open. I had no other options so I opened the camera up to fix it. I corrected it, but after I put the camera back together it takes poor pics. In normal light conditions it over exposes and pic looks really bright and also has many lines going through the picture? I love the camera and don't want to buy another one. I tried a different memory card and reset function under the menu.


Hi.You have damaged either the lens or the CCD sensor , located behind the lens, inside the camera.The camera must be taken apart by a technician to fix the problem.to get a quote on repair, try contacting Canon at ... Canon PowerShot SD750 / IXUS 75 Digital Camera

My camera says lens error restart camera - Canon PowerShot SD600 Digital Camera


Your camera has a lens error,\015\012 this\015\012 is such a common fault th ... Canon PowerShot SD600 Digital Camera

Lens error canon L3 coolpix - Canon PowerShot SD600 Digital Camera


OH NOES!!!! THE DREADED LENS ERROR... frankley on this particular camera it is very easy to fix... just take out the battery for about 30 min and make sure it is charged. and put it back in and it should work this happened to me... ... Canon PowerShot SD600 Digital Camera

When i power on my Canon PowerShot SD600 Digital Camera, it beeps a few times and says, lens error, restart camera. Help!!


Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart ... Canon PowerShot SD600 Digital Camera

It says lens error, restart camera! - Canon PowerShot SD600 Digital Camera


Try these:-\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012shake it.\01 ... Canon PowerShot SD600 Digital Camera

Lens error, restart camera - Canon PowerShot SD600 Digital Camera


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SD600 Digital Camera

Lens error restart camera - Canon PowerShot SD600 Digital Camera


Open your camera battery lid of bottom and on the lft hand bottom u'll find a switch........pressing and holding that switch try to on the camera......it'll work.......then insert some junk material to hold that switch in that position forever ... Canon PowerShot SD600 Digital Camera

Powers off my canon powershot sd600 digital camera keeps powering off after about 30 seconds. I have gotten a new battery and that didn't help. On the left hand side before it shuts down it has the letter and numbers E18 on the bottom. The zoom lens is also sticking out and will not retract. There are no error messages on the camera at all. If anyone has a solution please let me know. Thanks!


E18 is a lens error message, the lens is stuck or bent, and wouldn't come out, that's why camera shuts off after it tries to do so at the start, not much you can do, but replace the whole lens assembly ... Canon PowerShot SD600 Digital Camera

Lens error, restart camera - Canon PowerShot SD600 Digital Camera


Needs new Lens Block. ... Canon PowerShot SD600 Digital Camera

Canon Zoom Lens will not go back in - Canon PowerShot S2 IS Digital Camera


I think you touched the lens. So it won't go back. It looks as if your lens mechanism is not in its correct position. If it is not broken then it can be fixed easily. But it is broken then it should be changed, the whole mechanism.\015\012Somet ... Canon PowerShot S2 IS Digital Camera

Lens error, restart camera - Canon PowerShot SD600 Digital Camera


If ur very sure that the battery is fully charged... first we would advice you to change the batteries and see ...... if that doesnt work... the battery contacts may be corroded or bent and hence not making correct contact with the ... Canon PowerShot SD600 Digital Camera

Lens stuck wont go back in geting code e18 - Canon PowerShot A620 Digital Camera


If your camera is still under warranty, the best thing you can do\015\012is to take it to the nearest official Canon repair shop and Canon should\015\012fix it for free.\015\012\015\012If your camera is out of warranty, or i ... Canon PowerShot A620 Digital Camera

Lens is stuck. Will not close - Canon PowerShot SD600 Digital Camera


Here is an manual go through \015\012\015\012http://camera.manualsonline.com/manuals/mfg/canon/powershot_sd600.html ... Canon PowerShot SD600 Digital Camera

The lens will not go down - Canon PowerShot SD600 Digital Camera


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot SD600 Digital Camera

Lens wont go back in - Canon PowerShot S2 IS Digital Camera


... Canon PowerShot S2 IS Digital Camera

Lens won't go back in - Canon PowerShot A470 Digital Camera


Hi,\012\012If lens won't go back, Check batteries and make sure that they have sufficient charge, the batteries may need to be recharged or replaced. follow the instruction to resolve the problem.\012\012\012 ... Canon PowerShot A470 Digital Camera

My Canon PowerShot SD1100 IS Digital Elph won't turn on. I recharged the battery and put it back in, but every time I push the "on" button there are several beeping noises and the screen says "Lens error, restart camera."


This should help.I've had similar problems with various versions of this camera. Here's \015\012the fix, if all else fails. These are step-by-step instructions to take \015\012apart and fix the camera's lens error. \015\012http://johnsmou ... Digital Cameras

Lens will not come out when turned on - Canon PowerShot SD600 Digital Camera


Try these procedures. ... Canon PowerShot SD600 Digital Camera

I have a canon powershot sd600 and I can look at the pictures on the card, but when i try to take a picture or video the lens goes out and then back in and the camera turns off.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SD600 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 1.3229 seconds