Having problems with your Canon PowerShot SD600 Digital Camera ?

Delay timer I am trying to delay the timer and it is not working. Do you have the manual that explains it Thanks


Answers :

You can download the manuals for the PowerShot SD600 here.
\015\012
\015\012To use the self timer feature, you need to set it up in the menu first.
\015\012
\015\0121. Press the Menu button. If not in the shooting menu (silhouette of a camera), use the left or right arrow to get there.
\015\0122. Use the down arrow to select Self Timer.
\015\0123. Use the right arrow to select the clockface with a 2 or a 10 (2 second or 10 second delay).
\015\0124. Press the Func./Set button.
\015\0125. Press the Menu button to exit.
\015\012
\015\012Once set up, you can activate it by pressing on the down arrow. You should see an icon change from a rectangle to a clockface at the top center of the LCD when the self timer mode is selected. Press the down button again to cancel the self timer mode.
Repair Help & Product Troubleshooting for Canon PowerShot SD600 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Delay timer I am trying to delay the timer and it is not working. Do you have the manual that explains it Thanks


You can download the manuals for the PowerShot SD600 here.\015\012 ... Canon PowerShot SD600 Digital Camera

I have a Canon Digital EOS Rebel XT and the built-in flash no longer pops up when needed. This started happening after using a Canon speedlite, but then removing it. I've tried resetting everything, and tried all modes expecting that the ones listed in the manual as using a flash would work, but they dont, it never pops up. I lifted up the flash with my fingernail manually, and then tried taking a picture where a flash was most definitely needed, but it still had a long delay, no flash, and


In addition to resetting all the camera settings you should also choose the "clear all custom functions" option that is also available from the same menu. Once that's done. Put the camera in Full Auto mode and see if the issue is resolved. ... Canon Rebel XT / EOS 350D Digital Camera

All white pic is shown on LCD when used in Manual Mode with delayed shutter timer


Dave e mtb is right to tell you're overexposing the shot, the Nikon D40x and most Nikon SLR's have a WhiteBalance feature which lets you increase or decrease the exposure w/o modifying the shutter or aperture.Look for a push button labeled "WB ... Nikon D40x Digital Camera

How do I add pictures onto my computer with the Olympus u tough 3005? I have tried taking the memory card and putting it into this little slot in my printer for digital camera memory cards, and usually that works to upload pictured, but with this one the camera symbol keeps blinking red meaning there's a problem, and the manual doesn't seem to explain how you do it... please help!


The cause of this is probably an incompatibility between your memory card and the card reader in your printer. Your camera is fairly new, and you probably have a memory card of 4Gb or more, which is going to be SDHC. Your printer is probably older, a ... Olympus TOUGH3000 Digital Camera

Corrupt images Anything I take in the portrait, landscape, the green box, or close up end up corrupt. The manual settings along with the fast action, no flash and night time settings work fine... I have formated the card, I have tried everything can think of. I even looked through the whole manual. I tried a second card... nothing, why would those four settings not work and the rest are fine?


Try updating firmware from canons website under support fixes all sorts of weird problems ... Canon Digital Rebel XT / EOS 350D Digital Camera with EF-S 17-85mm IS Lens

With a canon 1000d, shutter button wont work, have tried shooting using EOS Utlilty from the computer and everything works perfectly, except the button appears to be dead when trying to take a photo. even timer and such doesn't work as there is something from with the connection from the shutter button to the shutter.


Try to disable the mirror lockup at C.fn no. 8 ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Overexposure My Nikon D40x is WAY overexposing in AV or S mode. Does it need repairing? (a long trip to get fixed). I tried resetting to default store settings, tried using only manual focus, tries changing the metering options. Noe have worked. AV mode worked beautifully 6 months ago in Africa ......


That sounds like the aperture blades may be sticking open.\015\012See if the overexposure gets worse and worse as you close the aperture\015\012When you see these kinds of symptoms, and is usually caused by oil that's leaked on the apertu ... Nikon D40x Digital Camera

Hi, I've a Sigma 28-105mm aspherical 3.5-5.6 lens. Auto focus does not engage. I can hear the motor trying, but the ring does not turn. When I switch to manual focus, I can turn the ring to focus manually, but I still hear the motor trying to use autofocus. Additionally, sometimes the shutter will not fire in manual focus while the motor is still searching. I've cleaned the contacts, but no joy. I suspect a faulty switch, but that doesn't completely explain the autofocus not engaging. I am


Well, I think you have at least one problem pinpointed, in that I suspect the focusing ring is jammed, and cannot rotate with the electromagnet signals. The other problem might be a faulty auto/manual switch. Of course, check for oxidation and e ... Digital Cameras

My Vivitar Series 1 24-70 manual focus ais lens won't work on program in my Nikon FA. I bought both new, but have stored them for a long time. It works on aperture priority, shutter priority, and manual, just not in program. All my other lenses do, including other Vivitar lenses, so it must be the lens. Fresh batteries in the camera. I get the FEE message, which means the lens is not set on the smallest aperture, but it IS set on the smallest aperture. I have tried dismounting and remounti


You are correct - the lense should work with the Nikon FA!\015\012It sounds like there is a communication problem, and the lense is in need of repair.\015\012Your local camera shop should be able to take care of it. The repair should be l ... Digital Cameras

I have a JVC recorder DR MV150B and I am trying to download a movie, but the disk i have is a SONY DVD+RW and the manual indicates that I neeed DVD+RW disks manufactured by MITSUBISH, or HP, or VERBATIM. First, will the SONY DVD work in this recorder. If not, where can I find the correct DVD> I have been to Radio Shack, Target, and walmart and none of them stock rhe ones listed in the manual. If the SONY wiill not work, where can I order the correct DVDs.


Just pay attention not to damage the video footage during the operation and you can try with the one you have if it is a DVD + RW ..I think you should format the DVD first and after that record on it ..It doesn't really matter the manufacturer as lon ... JVC Digital Cameras

The transfer process from my Nikon S8000 to the computer appears to be working normally but the photos are then not on the computer. I have tried changing the destination folder and have tried searching for all recently added files but they are just not appearing. It worked a few weeks ago, but was so easy to use that I didn't even refer to the manual but I'm fairly confident that I'm not doing anything differently. Any thoughts?


It will be better to put the memory card into the PC and straight away load it into the PC without using the transfer cord.\012Insert the memory card to the slot of the PC and transfer.\012You can for sure have this copied to the destin ... Nikon COOLPIX S8000 Digital Camera

Manual mode I bought a G9 and so far I'd had no problems but I tried to use the Manual Mode and found that the pictures it takes are almost black... I went over every setting, tried diferent sensibilities but I cannot find the problem. In the other modes Auto, P, Av, etc, it works perfectly fine. Can anybody help me?


I presume that when you select Manual Mode you are then selecting a suitable aperture and speed and ISO to give you a correct exposure? If you are then I guess this is a problem for Canon to sort out.\015\012Sorry if I'm teaching you to **** eg ... Canon PowerShot G9 Digital Camera

Hi, I am trying to use the self timer function on my Nikon D90 but it doesn't seem to work. I have checked on many sites how to use it, but whenever I press the self timer button and turn the roll left and right nothing happens. The option is fixed at shooting instantly and multiple shots. I tried in all camera modes, but still cannot change the option. What am I doing wrong?


The button for this is on the right, the second one from the rear and it has multiple squares on it for a symbol. Pressing and holding this button down then turning the rear dial should change the shutter release function. It cycles th ... Nikon D90 Digital Camera with 18-105mm lens

Hi. I have a Canon Xsi/450D Camera. I can access the menu funtions when in the preset modes eg. landscape, sports etc. but when i rotate the dial past the Auto mode into the manual settings modes(the creative zone as canon calls them) the menu funtion will not work. I push the menu button and nothing, the remote funtions will not work either. I've tried to update the firmware, but as you have to access the menu in the manual modess to do this i cant update the firmware either(also cant do


The manual mode runs off power from a separarte capacitor. The capacitor holds a charge which is greater than the voltage of the battery for the needs of this option. When a capacitor fails nothing will operate in the manual mode. You will need to ha ... Canon EOS Rebel XSi Digital Camera

My AOL Photocam (made by Pretec I think) worked fine yesterday. When I tried to re-insert the PNY Technologies 128mb compactflash after dumping pictures to my pc, it gave me an error message: "card error, error code 004". I've tried every variation I know to insert the card correctly, but since I can't find my user's manual, I can't determine the error. Help! What could I do or where could I find a manual for a product this old?


... Digital Cameras

EOS 450D/18-55 IS, problems with AF Hi all. I am using a Canon EOS 450D, 2 years, with standard 18-55 IS lens kit. Yeasterday a friend shoot a lot of fotos indoor, with the incorp flash, once outside I could not shot anymore because the autofocus was not working well only the manual mode was working. I noticed that after having taken one picture close in manual mode, the AF was functioning for subjects further away but if I shot closer subjects it was somehow blocked. I tried abother lens and


Hello,\015\012\015\012I had a similar focus problem with a Tamron 70-300 for canon. What can i tell you is that if you o not have experience in this domain you should NOT disassemble the lens because you will have a very hard time to put ... Canon EOS 450D Digital Camera with 18-55 Lens

My Pentax K100D has suddenly stopped working. It hasn?t been bumped or dropped or anything. A few days ago I was still taking pictures, and then a day or two later when I tried it, it wouldn?t work. When you press the shutter release button, nothing happens. No autofocus, no picture is taken, nothing. The only thing is that you hear a fairly rapid clicking sound, perhaps like a gear wheel turning or something. I tried various settings, new batteries, a different lens, autofocus, manual focus, ev


Hi there as per your mentioned sound or noise is says that the problem create by your camera lens guide pin. Its damaged or dislocate. So i also suggest you to visit the service center. Thanks.\015\012 ... Pentax K100D Digital Camera

Camera FX35 was working fine. In middle of taking pix in Oxford, screen suddenly refused to come back on, although optical viewfinder works and on screen viewing of taken shots works OK. Is there a power-saving feature I accidently turned on? Only have the simplified manual with me and am new to the camera. Tried my spare battery but same results. I can continue to take shots via the viewfinder and shots seem to work, but I really want the screen back -


The [AUTO LCD OFF] of the [ECONOMY] mode is active> Press the shutter button halfway to cancel these modes.Charge the battery or replace it with a battery which has enough capacity. ... Panasonic Lumix DMC-FZ7 Digital Camera

Manual zoom does not work when I try and use it


Most likely the motor mecanisim was damaged when you dropped it. was unable to locate a sony dealer in nepal, You could try Sears if there is one in nepal.\015\012\015\012Hope that was helpful. ... Sony Cyber-shot DSC-W50 Digital Camera

My d200 is picky about when auto focus works. It won't work for the shot I want, but if I turn the camera 8 degrees and try at that angle, it works fine. Sometimes turning the camera to manual, then off, then on, then back to auto focus does the trick, but not always. What is going on?


The focus ring inside the camera is a free-spinning lens that is controlled by electromagnets, with feedback from the microprocessor and sensor. When some dust, lint, sand, or dirt works it's way into the lens assembly, the ring can hang up, which ... Nikon D200 Body Only Digital Camera

Owner's Manual I can not get the owner's manual to work. I can not find it online and the camera is not much good with out the manual. If you know how to get one please let me know. I have the CD that came with the camera but everytime I try to use it I have to purchase something on the internet and I don't think I should have to do this. I am very frustrated.


You can download owner's manual of Finepix S1000FD, click Fuji Support. ... Fuji FinePix S1000FD Digital Camera

My Nikon D40x won't auto-focus. When I press down the shutter button, it won't do anything at all. If I switch to manual and back to auto, it works for 2-3 shots, and stops working again. If change shooting modes from single to timer and back, it might work for a couple shots. I have not been able to find any other solutions. Any suggestions?


Try cleaning the contacts on the camera body and lens where they meet with a cotton swab lightly dampened with rubbing alcohol ... Nikon D40x Digital Camera

Nikon D50 I have been reading through Fixya to try and find a similar problem. I have a Nikon D50 and have been using it with no problems for over a year. However, now when I try to take photos in AF, nothing happens. It locks up. So, I have to try to take photos in manual. Some come out OK and others not. Very frustrating as I missed lots of xmas pics. When I hit the AF-L button, it seems to work in AF mode. Any suggestions?? [email protected]


When my D50 Nikon had r09 I changed the lens and it worked with a different lensLora ... Nikon D50 Digital Camera with 18-55mm Lens

Focus Problem Dear folks, I just bought a (new) Canon A75, and it doesn't seem to focus. At all. Even on manual focus, not only can I not get it to focus properly, the focus doesn't change at all. When on AF, it doesn't beep like the manual says it should, and the yellow light blinks, as it's supposed to when there's a focus issue. The focus assist light is working. Can anybody think of anything I should try? The manual is of no help. This is my first digital camera, so I'm not ruling out the po


I'm not sure on the problem, but one thing to check on the front of the A75 it also uses an IR beam to set focus. It's a little circular dot under the flash on the right side. It will light up red when in use to project the IR beam. Make sure you ... Canon PowerShot A75 Digital Camera

Has always worked fine, til just now. took a photo, went to put onto ebay and opened picture using windows picture and fax viewer. not happy with photo,switched off, removed camera from cradle (link to pc) and tried to take another photo, but when i switched the camera on i had an error message stating 'focus error' and when i tried to switch it off the zoom lens remained extended and will not go back into tne camera. I have read the manual and tried removing and replacing the battery, but this


For your information the computer has nothing to do with the focus error!!!!the error appears as a message due to either of these reasons.\015\012\015\012you have dropped down the cam.remember even a small drop may ca ... Fuji FinePix F410 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3140 seconds