Having problems with your Canon PowerShot SD600 Digital Camera ?



Answers :

I might make sure that the lcd panel and backlight are sufficiently attached. It is fairly easy to take apart the camera with a small screw driver. You might want to take it apart and push the two ribbon cables in tighter and then try again. (Make sure to take out the battery first)

images of the the dissasemby are on this page:
Disasembly of Canon Powershot SD.

Great disscussion of LCD assembly.

Good luck!
Repair Help & Product Troubleshooting for Canon PowerShot SD600 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

LCD Screen Hi i'm having a problem with the LCD screen on my camera. Today i used the tripod to take a few timer photo's and when i was done i took the camera off the stand and was viewing them when the screen started to flicker and went gray i have not had this problem before when using the tripod and the camera was secured the same way, i can view the photo's through the eye view finder but not the lcd screen. I there a solution or do i need to send the camera back as this is the second camera

There could be a loose connection to the lcd screen. You should have it looked at. ... Fuji Finepix S9600 Digital Camera

Lens Problem I just bought an Olympus C-8080. While switching the camera on there are some 4 to 5 light pixels on the display (lcd monitor on the back of the camera), even when directing the camera into the dark. It is not really a problem now, but do you also have this problem with your LCD monitor? What if they become more?

Dead pixels are a nightmare of every LCD screen. There is no way to avoid them - you can just hope they never happen to you. There is no pattern to how they appear and when, but the ones you have will stay for ever. If they bother you right now, send ... Olympus Camedia C-8080 Wide Zoom Digital Camera

I own a canon powershot S3 is and I am getting this strange E24 error where in the camera lense would comes out and just goes in . Another interesting thing I observed is when the LCD is on and I am in the image display mode (That is browsing the existing images) then there is no problem if the LCD panel is open or closed the camera just seem to respond normally, only when I change to the shooting mode the camera lense would come out and go in with the camera shutting down. what is problem with

It sounds like it needs to be serviced. If you're out of warranty, then go to this site: www.camerasandparts.com They just service the Canon Powershots exclusively and they ... Canon PowerShot S3 IS Digital Camera

Focus There is one problem that I have with this camera - Auto Focus in low lighting and it has really limited manual focus. Outdoors this camera is outstanding, I haven't found any pitfalls outdoors yet. 10x optical zoom plus 2.5" LCD WOW. Although the LCD is littly choppy, but I don't care about that, pictures turn out really gooood. Anyways back to Auto Focus problem. Do any of you have the same problem? Or this is my ability problem? That limited manual focus really bugs me! I'd like to hear

I have similar problem. So I use manual focus (1m,3m,inf) & move camera for finest pix. On AF, the adjustment seem to go past sharpest image point but settles on a fuzzier setting. Is there any place that can make a repair? ... Toshiba PDR-M700 Digital Camera

Hi, I have two Cannon 40D Cameras and am experiencing problems with both at the moment. One Camera is very slow after pushing the button to take a photo. I have checked all of the batteries and this is not the problem. The other camera will take 4/5 shots without a problem then as I am taking the shot I feel like the camera flutters, the lcd screen shows an error symbol and says the contacts between the lens needs cleaning. When I turn the camera on and off it fixes the problem temporarily but i

Problems like these can be addressed by Canonusa.com which can be contacted at 1-800-OK-CANON.\015\012 ... Digital Cameras

Hi, I bought the Fujifilm Finepix S2500HD a week back. I have noticed a strange problem with the LCD screen or is it the sensor? In low light situations when you turn the camera on, the screen is not clear and there are disturbances in the form of blue dots across the LCD which appear like a screen refreshing phenomena. The same can be observed in the EVF also. Is there a problem with the sensor of the camera. The best way to notice this problem is by keeping your hand fully in front of the l

Does the camera still take good pictures in low light? If so, I suspect the phenomenon is normal. ... FUJIFILM FinePix S2500HD / S2600HD Digital Camera

BATTERY DISCHARGE I have an Olympus FE 210 Digital Camera and had been using the same for over 3 months. Recently I observed a problem in the same. When I put the camera on, I can browse on the LCD screen and can see the snaps available in the memory. However, when I try to click a new snap, before the flash could pick up, the LCD screen trurns blue and starts showing the signal "BATTERY EMPTY". I changed many sets of new batteries but the problem continues. I am not able to use the camera for c

This is the worst camera I have ever owned. There is nothing wrong with your batteries. The Battery Empty sign lights up even when I know they are full. It happens all the time with mine. I believe it to be the contacts in the battery compartment. Wh ... Olympus FE-210 Digital Camera

I have a swing-out LCD display on my powershot camera when opening the LCD display the image appears upside down how can i resolve this? there were never problems in the past.. when closing the lcd display on the back of camera with the display face-up no image shows..i would really appreciate help to resolve this problem as i'll be going on holidays soon..thankyou..Anna

The camera requires partially dismantling in order to fix this. if you cannot do it yourself then you will have to take it somewhere but be warned it wont be very cheap. If you live in new zealand i could do it for you however unlikely that is. ... Canon PowerShot A85 Digital Camera

Ref: Panasonic Lumix DMC-TZ1 Camera. The cover plate over the LCD screen cracked (left side). So far, the LCD display itself is not affected. Is it possible to replace just the cover plate without having to install a new LCD unit? If so do you have a part number for the plate? I understand that cracking of the LCD screen is a recurring problem with the Lumix series of digital cameras and also that Panasonic has taken a hard line r.e. guarantee coverage. My camera is 2 months old.

Sir/madam,please do contact Panasonic with your complaint, this is the only way we are ever going to get this problem resolvedthanks ... Digital Cameras

Blurry LCD Well, I have recently got a SD400 camera from dell.com. The first thing I noticed was the inaccurate LCD. The picture in the LCD seemed blurry(bad resolutoin, weird coloring) and inaccurate. But, after actually taking the pictures, the picture seemed perfect. (In the review mode and the display right after you take a picture.) Is this a problem? This is my first digital camera, thus I had no previous experience with camera LCD. Or is this normal, without flash, everything is suppose

Hey i found this site that is great on how to change a LCD for the camera\015\012\015\012http://digitalcamerarepair.googlepages.com ... Canon PowerShot SD400 / IXUS 50 Digital Camera

Display problem Hello, I've had my SD1000 for less than 3 months. Sometimes the display goes black, I can still access the menu options and if I slide the button to review images they will display on the LCD panel. But even if I've just powered it on, the LCD is black, if I take a picture anyway, the picture is also black. Sometimes if I turn on the camera and turn it off again a few times it starts displaying correctly again. Is there a hardware problem with my camera or is this something I sho

I had the same problem with my SD1000 and was so frustrated with reading all of the troubleshooting "solutions".... After a couple of days researching, I finally stumbled upon a site that actually suggested turning the unit off and "slapping" it a c ... Canon PowerShot SD1000 Digital Camera

I have 2 Sony cameras with problems..one is a DSC-T1..there is no picture when in the camera mode..will display pictures made earlier..lcd is blank in camera mode. The other camera is DSC-F717..Camera has hardly been used..in camera mode the lcd only shows a smeared image..the image is not recgonizable. Strange conicidence, but both failed nerly at the same time.

Hi kd4kdp,\015\012Both of your camera have bad CCD Imagers and must be replaced. Good news for you is that Sony will replaced these parts free of cost. Check more details on following Sony web link. Have nice day.\015\0121= ... Digital Cameras

Lens problems my camera keeps saying "lens error 111,0,0,0" then "lens error 221,0,0,0". the camera is a kodak easyshare c813

There is a problem wit your lens section, get it repaired with your company professionals. Your camera may be fallen or being pressed from front side by someone. The new ZOOM will give the same best result and no further problems. ... Kodak Easyshare C813 Digital Camera

Dark LCD I have an A70, about a year old. The problem is the LCD screen is very dark. It is almost completely black unless I point the camera dirrectly at light. If I take a picture with the viewfinder the picture is exactly what the LCD screen looks like. This happened as we were using the camera. I also cannot view any of the pictures in the camera. I no the display is not completly out because it works to access the menu screen. It wasn't droped or anything. I can't find any setting to change

I have a sony cybershot dsc w730 , since a year. The problem is that over 2-3 months the LCD screen has become very dark. It is almost completely black unless I point the camera dirrectly at light. If I take a picture, the picture is exactly what the ... Canon PowerShot A70 Digital Camera

The lcd of my Panasonic Lumix DMC-FX01 became grey when i was taking photos. There is no problem with the photos though. The camera works without any problem. The problem is that the lcd is grey and i cannot see clearly the subject of the picture . I tried all the lcd settings but no luck. Thank you in advance for your time

Pls try to reset the camera to factory settingsperforma a software reset via the menu's using the settings on the 'play' setting on the dialif it doesnt help then u can buy screen here and get it fixed or u can fix ... Panasonic Lumix DMC-FX01 Digital Camera

I hit the power button and it turns green for a second but then goes out. The camera and LCD screen do nothing. So I have some sort of power problem. When I put the battery in the charger the charger light comes on for about a 10seconds but then goes out (suggesting that the battery is fully charged). Is this a battery problem (not charging or holding a charge) or a camera problem? I don't want to buy a new battery if the camera itself is dead... Thanks!

Hi i have struggled with this within few months of buying the camera.\015\012Both the charger and camera are not making a good connection with the battery. i clean with alcohol, this usually helps with the charger. When powering up in camera i ... Sony Cyber-shot DSC-W120 Digital Camera

Canon s2IS when I turn the camera on in review mode the LCD screen displays pictures one after another. Cannot stop the picture review except to turn off the camera. In camera mode the menu button and other buttons do not function. The problem occurred while I was pressing and holding down the LCD review button and viewing hundreds of time-laps pictures I had taken with the camera.

Hello,\015\012Please do the followings.\015\012\015\0121. Turn off the camera.\015\0122. Remove the memory card.\015\0123. Remove the batteries.\015\0124. Wait at least 3-5 minutes.\015\0125. Place the memory ... Canon PowerShot S2 IS Digital Camera

Hi.. My Olympus Stylus 710 camera is one year old and I have been having problems with it recently. Basically the camera is unusable right now. When i press the power, the lens open halfway, the picture on the LCD is blurry and one second after the lens close and an error appears of the screen saying "D: 5f08 5f0e 5f08 5e02". Can you help me fix this problem? Sending the camera back to Olympus to fix will cost a bundle and where I live, no one fixes digital cameras.

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode ... Olympus Stylus 710 Digital Camera

My Canon SX210 IS is brand new. Just bought it on yesterday. The problem I'm having is that the LCD screen does not look sharp and clear when focusing on a subject. It looks grainy. Can you tell me if I need to adjust the settings on the camera? I was indoors in low lighting, but I've never seen the LCD look this way on a camera. The LCD is always clear and sharp when focusing.

Some cameras display a grainy picture in low light. Do you have the camera set to the highest number of megapixels and fine image or do you have it set to a lower resolution to get more pictures on the card? ... Canon PowerShot SX210 IS Digital Camera

Am in Italy and my Lumix DMC ZS6 camera was dropped on a stone floor. The LCD is was cracked but the lens tracted and retracted and it took pictures. Two weeks later however, whenI wanted to use the camera, it did not turn on and the lens did not open. Is this simply a matter of replacing the LCD or could it be a bigger problem with the electronics. Would it be better just to buy another camera? Thanks!

Hello LauraWell, as you can imagine, dropping the camera will almost always have bad results. Besides your cracked LCD, i think you might have a circuit problem.In this case, it will be much cheaper to rather buy a new camera, ... Panasonic Lumix DMC-LZ2 Digital Camera

Orange LCD When I turn on the camera the LCD on the back of the camera is very orange to red in color, but I can see the display, menus, etc. After a few minutes everything seems fine. Is this a bad LCD or just a common issue with this model? If it is a problem will it get worse?

Could well be a bad backlight. There are replacement LCD assemblies on Ebay for under $45, and as a good working 5050 is worth $200 or so, it's worth doing. ... Olympus Camedia C-5050 Zoom Digital Camera

Err 02 When i switch on the camera the EOS appears on the lcd screen other than that it is blank. After a while an error 02 appears (CF card fault). I have tried previously working cards and they all do the same. The manual says re-format the card but as the lcd screen is blank, this is not possible. The battery is fully charged. Is this a problem with the camera or the card.. My gut feeling says it's the camera.. Please help, Thanks...

Hi,If we talk about Error 02 - This error occurs when image data cannot be written to the CF card.\015\012This error can occur when the CF card is not fully seated in the camera\015\012or if the 350Ddoes not detect a card-ready signal wit ... Canon Rebel XT / EOS 350D Digital Camera

Coolpix L18: The LCD screen is broken; just displays a large black "blob" on a white background. Would this prevent all other camera operations? When the camera is turned on, the green power light flashes, but nothing else seems to work. Camera will "beep" when shutter button is pressed, but lens never opens. Is this a LCD issue, or are there other problems as well?

... Nikon COOLPIX L18 Digital Camera

I have a kodak Easyshare C813 digital camera. My son did something to it so there was a lens error and it was loose, you could still take pictures though. My daughter took it and went to take pics and now its even worse than before, lens error 127, 0, 0, -12 on the LCD then camera shuts off. What is the usual cost of repair for this? Or would I be better off buying another camera ($100 for this one)

The avarage repair price for this model with this fault:\015\01248,44 pounds.\015\012\015\012There is a high possibility that your son might have dropped it.\015\012\015\012KODAK also offeres a Trade up. Where you for a ... Digital Cameras

Hello, From the moment I put a full loaded battery into my camera ( and althought the camera is still switched off) the LCD panel indicates A LOW BATTERY and keeps blinking. Switching on/off bottom and nothing happens. I tried another full loaded battery and same problem. I cannot use the camera at all. What could be the problem ? and what is the solution ? Would be great to get any advice from you. Thanks. Alexander.

Havnt head of this problem. if you are using canon official batteries and the charger used is correct for your country then take it back to the shop you got it from and send it in for repair. Or you could head over the japan canon site and see if t ... Canon EOS 7D Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3222 seconds