Having problems with your Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera ?
Lcd display does not work
\015 All of a sudden,lcd display does not work. battery fully charged. cannot see any pics in any mode. Help! Please!\015
This is considered a no image problem. You can get help with this exact problem at: www.camerasandparts.com since they only specialize in service for the Canon Powershots. They have your exact model and exact problem right on the site so it's easy to have taken care of and have the camera serviced at the same time. Hope that helps, that site is amazing if you need help with a powershot. Good luck with it.
Repair Help & Product Troubleshooting for Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!
You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera
I have (2) DGS-200 Moultrie cameras that the LCD display has gone out. Replaced (1) with the LCD display from a Moultrie 100. Worked great but I still have two cameras that can't be programed without seeing on LCD. Is there anywhere to purchase these LCD screens or purchase non-working Moultrie cameras?
WWW.MOULTRIEFEEDERS.COM WILL SEND REPLACEMENTS AND INSTRUCTIONS FOR FREE.... ... Moultrie MFH-DGS-100V2 Digital Camera
My sony dsc-w1 got very wet, caught in a rainstorm and did not have the case. I have left it dry out for 4 days and it turns on, lcd works, can read memory stick and display old pictures on the lcd. But when I try to take a picture the lcd displays a black a screen and the picture that it takes is just a black box, flash illlumintor everything else seems to work, except the ability to take a picture, lens moves in and out, but picture is always black, any idea, is the ccd shot
Maybe the shutter got wet and sticky. You can try look into the lens then press shutter button to take picture. If you don’t see the movement inside the hole, the shutter doesn’t open, it will take black picture. ... Sony Cyber-Shot DSC-W1 Digital Camera
Lcd display not working.nikon p500 went into watrefalls.. after putting it into ricebag for few days ( service center guy told it can t be done) after few days i could switch on camera , and could take pictures from view finder, lcd display seem to be not working.. any thing advisable to make work? can i go for new lcd, if so how much it would cost..
Yes you can replace it You must to do the decission replace LCD vs New camera. Call or go to NIKKON and ask them where is difference in cost Sometimes replace is cheaper that to buy. Other is better to buy that replace specially in USA.God bless ... Digital Cameras
PV-DC152D CAMCORDER, LCD Display only works if it is pulled out, turned 180 degrees and pushed back into place so the display is facing you. If you move the LCD display over 3/4" away from camcorder it will go black again. Personally, I think this is an issue with some sensors that gauge when to turn on the LCD display "ON" and Viewfinder "OFF" and vice-versa. Any help on this would be appreciated since there is nothing else wrong with the camcorder.
The most likely problem is a cracked ribbon cable that goes between the camera and the display. The cable needs to be replaced. Typical cost for this is around $40 or so plus labor. I would not suggest that you attempt this repair yourself as open ... Panasonic Digital Cameras
Camera repair The LCD display is white with red lines going through it. Even the viewfinder does the same thing -- white. When I hit the view button, the same thing sometimes. It seems to do worse outside. You can faintly see the pictures I took in the LCD display. Now the LCD display is totally black. What's wrong. The menu display still works. What can I do?
Time for a new Camera. It is about 150.00 to replace the LCD. it is cheaper to replace it unless you can just use the viewfinder alone!! ... Kodak EasyShare Z612 Digital Camera
Sd110 lcd My LCD did not work, canon repaired it....GREAT! but 2 weeks later it died. It was blank so I send it back and canon says they want money to fix. Damn.. It still takes photos with no problem. I cannot access any functions because the LCD won't work. I've tried the Display button and got the black and white screen of death. I have to take the card out to transfer photos. Canon says"UNIT HAS IMPACT/PRESSURE TO LCD". Do I need a new LCD or what. thanks, steve stokes
I have had my LCD screen go out in my small point and shoot as well, though i did not even bother with my company for the warranty was far expired. You could do a couple things. You could buy an LCD screen off ebay, or anywhere you can find it ... Canon PowerShot SD110 / IXUS IIs Digital Camera
My cibershot DSC-F717 does not have anything in the viewfinder and the LCD displays the settings and options.The screen is black with yellow words and numbers Also my zoom will not work. The LDC does not have an image on the viewfinder nor the LCD. I do have the LCD setting options displayed. The zoom will not show where the setting is on the LCD and I have checked all the settings (the focus on the zoom mode, conversion in the set up turned to off).
HelloThank you for using FixYa for your problemYour camera is faulty. It should be taken to an authorized repair centre for a repair estimate. Very few digital cameras ... Sony Cyber-Shot DSC-F717 Digital Camera
Nikon D40 hello.. I have a Nikon D40...and the display picture is not working,not even when i turn the camera on,not to see the pictures i was taken...is just not working,please help me.... My LCD display suddently stoped working. It happened before once, and automatically its started working. Please help me !
Try pressing the "info" button on the top of the camera next to the shutter button. This turns the LCD off and on to save battery life. ... Nikon D40 Digital Camera with G-II 18-55mm Lens
The top (monochrome) LCD on our Nikon D80 recently broke. I think that it is actually called the "Control Panel," and displays settings, battery life, number of pictures remaining, etc. Please note that this is not the 2.5" color LCD on the rear of the camera. I know that it is merely the LCD because the backlight works, as does portions of the LCD display itself. Does anyone know of a guide or video to perform this repair? Also, does anyone know the part number? I plan to call Nikon tomor
Hi Jason. First of all, depending on the age of your camera and the warranty you purchased, this camera may be under warranty which would result in Nikon fixing it for free. \015\012\015\012Here is a free downloadable manual for your camera ... Nikon D80 Digital Camera with 18-135mm Lens
Canon EOS Digital Rebel XT: The upper lcd screen info flickers,some of the icons on the screen work normaly, but other icons are lighter and flicker. Im speaking about the portion that displays battery life and #of pics taken. The lower display screen (color)works fine. Otherwise the camera works fine.
It seems you have a false contact in the upper LCD screen, its flat ribbon cable or the connector at the main board.\015\012\015\012It is necessary to open it and check it.\015\012\015\012It is fairly easy to do it, but if the ... Canon Rebel XT / EOS 350D Digital Camera
LCD Display I haven't used my canon for a while - I've just turned it on and though the LCD display works to show pictures I've taken and the settings screen - I can't see anything in it when I take a picture (it's just black) when I press the Disp button it just switches from a black screen to the settings screen - please tell me what I can do so that I can see the image in the LCD before I take the picure. Thanks for your help
As far as I am aware, the 400D doesn't have a live preview mode.What you are describing is perfectly normal and is how 99% of digital SLR cameras behave.Are you sure it used to do this?Matt ... Canon EOS 400D / Rebel XTi Digital Camera
I have a Canon Powershot 5S IS. The image on the LCD screen is not rotating when I rotate the screen, and when I snap the screen into place with the LCD side out it goes from displaying on the LCD to displaying on the viewfinder. It was working properly before, but I can't figure out how to get it back to those settings.
On camera menu, turn on Reverse Disp. ... Digital Cameras
Blank lcd I just got a new canon 600D. After playing with it for a while, i turned it off. Then after 5-10 mins i turned it on once again, and opened the lcd screen, but it shows blank(or say black). I can see that the lcd backlit is workeing, but nothing (no content) is displayed. Can this be an issue of low battery ? pressing the shutter button full also not capturing the picture. Flash works though, and optical view finder too, but it does not capture the photo.
Hi there:Some symptoms of a defective CCD include distorted images or abnormal colors, scratchy purple lines, blank or black pictures, and/or black videos with good sound being recorded on the camera's flash card. ... Canon EOS 600D Rebel T3i Digital Camera
Canon A75 No startup sound & display on LCD, rest of things works fine
Think it might be your batteries. 700mah batteries are pretty weak by today's standards (most are at least 2,500 mah these days). I'm guessing your batteries are several years old? If so, they're really only meant to have a usable shelf life of a ... Canon PowerShot A75 Digital Camera
LCD display The LCD display of my Fuji finepixa350 doesn't work anymore. When turned on it just turns into white color.
This is either a connection failure of a main board problem.Try to squeeze the base of the camera and the top over the screen or simply hold it in one hand and slap the bottom gently but repeatedly.The idea is if it is a connector problem ... Fuji FinePix A350 Digital Camera
Lcd display not working on nikon d40. When we turn on the camera, and take off the lens cap, the lcd display is black. we can use the viewfinder to take a photo. We can view the image after taking the photo, but can not see the image prior to taking the picture.
The D40 works the same way SLRs have worked for the past half century. Only recently have dSLRs acquired a "Live-View" capability, where you see the image on the LCD monitor instead of through the viewfinder.I realize this probably wasn't ... Nikon D40x Digital Camera
Hi, i have a sony alpha DSLR- A200 that is working well but now i can't get the menu display to work - when i take a picture i can quickly see the play back on the lcd monitor but if i press play or menu nothing appears on the lcd monitor. Then menu usually will show me battery life, etc but I can't find any of that..I have tried recharging the battery, removing and re-inserting the battery and the memory card and no luck. I can take photos and download them I just can't review anything on the
... Sony Alpha DSLR-A200 Digital Camera
My samsung s1070 will not turn on. it was working yesterday and i was able to take pictures with it. now when i turn on the power button the camera beeps three times but nothing is visisble on the lcd display. also the lense is fully out even though the camera will not turn on. why is this happening and can you please advise me how i can turn the camera back on so that the display works aswell?
OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local garage Get them to fit the triggered air blower tool to it.Blo ... Samsung S1070 Digital Camera
LCD Problems Hi, My Rebel XT's Top LCD screen and Display in the view finder isn't working properly. It displays random "symbols" but is identical in both. An example of this is the range finder will roll down but 3 notches will stay lit up ( 1 on one side 2 on the other. Do i need to send it to back to Canon?
Probably a canon repair situation ... Canon Rebel XT / EOS 350D Digital Camera
Nchatta Hello, My Canon s45 was working perfectly until it was dropped from a very very small heigh in a soft leather case with protection. The camera works in the sense that it can read and display the images from the SD card perfectly, the lense extends but you cannot see anything on the LCD when wanting to take a picture bar a white box in the middle that usually turns green once focussed (but now doesn't.) The screen is just black. The shutter clicks, takes the picture, but just a black LCD
It seems like if u see icons on lcd then sorry to tell u i think ur CCD is gone it seems like , but to make it sure first get the lens checked but iam pretty sure abt the CCD bcoz it is risky in impacts and jerks ... Canon PowerShot S45 Digital Camera
I have a Canon A75 Powershot in excellent condition. Since yesterday it dosn't work. When it is in capture mode, I cannot see the picture from the LCD display. Display is working. When I try to take picrures I get a black picture with nothing on it, just like I am capturing in a very dark place. But I can see pictures that I have captured before the problem. What can I do? I am Christos, from Cyprus. Is there anyone who can fix this problem with my camera?
CCD is gone.Need replacement. ... Canon PowerShot A75 Digital Camera
I have canon power shot A 720 IS. Its been fine for 2 years. suddenly it stopped displaying in the LCD screen. But i can take pictures by looking through the view finder. Also, the LCD display works when in the video mode and photo stitch mode. please let me know the solution. Thanks.
Maybe the display was turned OFF. Check it and turn it ON. If still in problems, look for a specialized service to check you camera. ... Canon Digital Cameras
Sony DSC-T100 lcd screen is dark and faded My lcd display doesn't seem to be working. It worked fine one day and the next I turned it on and at first glance it looks black. If I move it around I can bareley make out an image or menu options. I charged the battery and it made no difference.
Try to set it on afactory defaults or try to give the lcd a higher contrast or brightness to chekout is the cam still work or its an internal hardware problerm take a shot and see it through th computer. ... Sony Cyber-shot DSC-W55 Digital Camera
My Kodak Easy Share C613 purchaed 13 months ago seems broken, It appears like water damage of some sort. Buttons stick, LCD display turns on intermittantly, pictures don't take, and can't view older pictures. Sometimes when the LCD display does work it looks like water drops in the backgroung. How much does it cost to estimate repair and who do I send it to? Jo Lynne
Try this :\015\012This works on most mini electronic devices like cellular phones and degital cameras etc . \015\012\015\012it sounds crazy .Remove the back (or Cover ) of the phone( or Camera ), battery, and SIM i ... Kodak EasyShare C613 Digital Camera