Having problems with your Canon PowerShot SD750 / IXUS 75 Digital Camera ?
My sd750 will not start up
\015 When i try to turn on my canon powershot sd750, all it says is, lense error, restart camera. i have not dropped it or broken it in any way, what should i do?\015
Does the lens cover move when you do this? If it doesn't, it sounds like that might be the problem.
Repair Help & Product Troubleshooting for Canon PowerShot SD750 / IXUS 75 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
My sd750 will not start up
Does the lens cover move when you do this? If it doesn't, it sounds like that might be the problem. ... Canon PowerShot SD750 / IXUS 75 Digital Camera
My son is in France with his two week old PowerShot sd750. Says it worked fine until yesterday, but now will not start up. He checked the battery by putting it in a friends camera. Any suggestions?
I am having the same problem with my olympus E520 camera. I'm on holiday too...disappointing to say the least. If I find a solution I'll let you know asap! ... Digital Cameras
Windows 7 says Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Canon Powershot SD750
Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Canon PowerShot SD500 / IXUS 700 Digital Camera
SD750 not turning on
Did you reolaced battery that evening, if you did then try holding the battery door tight and the turn it on. If this will solve it it means that there is a play in battery door that happens very often if someone is not careful enough while replacing ... Canon PowerShot SD750 / IXUS 75 Digital Camera
I get horizontal lines on my sreen over my pics using my canon SD750.
HiIt sounds like the aperture in your lens is stuck open and\015\012the pictures are overexposed. Try a lower light setting, do the\015\012pictures look alright? If so it's the aperture, and the lens will need\015\012to be replaced. If th ... Canon PowerShot SD750 / IXUS 75 Digital Camera
Canon Powershot SD750... battery or camera problem??
Try to clean the battery terminal inside the battery compartment, use barbecue stick with cotton buds with little drops of alcohol and rub the terminals. Also check the terminal spring, maybe it is loose or not pressing the battery enough. ... Canon PowerShot SD750 / IXUS 75 Digital Camera
CANON POWER SHOT SD750 DOESNT TAKE PICTURES BLACK SCREEN
Mine started working again. The only thing I can attribute to it is that I zoomed the lens in and out several times. The next time I turned it on, it worked. Go figure. I'll update if things change. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera
Camera screen is black at start up
You should reset the camera. This is a fairly easy\015\012procedure which involves either going into your setup menu and choosing\015\012"reset" (or intialize), holding down the menu key for 5 seconds, or,\015\012removing the batteries for a few minu ... Canon Digital Cameras
"cannot detect camera" message using canon powershot sd750
... Canon PowerShot SD750 / IXUS 75 Digital Camera
As I Purchased a New Nikon Collpix (S3000) camera, shopkeeper advised me to charge it up 7 hours before the use. As I started charging, Indicator was blinking to show charging, after 10 minutes, it was putt off that is meaning NO CHARGING. I plug out and again plug IN, charging was started again, Same thing happened again, after few minutes charging was stopped automatically. I considered that may be charging is completed. I start to use but after few pictures battery was depleted. I am worry ab
It's not unusual for a defective battery/charger/camera to happen. Take it back and ask for a replacement. ... Nikon Coolpix S3000 Digital Camera
My sony cyber-shot dsc-t2 has started to vibrate. When i turn off the camera or start to browse thorugh my photos it stops, but whenever i want to make a photo i it starts to vibrate again. All the photos turn out really blurry.
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\ ... Sony Cybershot DSC-T200 Digital Camera
I am trying to download my pictures from my Canon IXUS 860. I have installed and updated the Canon software and it used to work. Now the Camera Window software will not start if I try and start it either automatically (when connecting the USB cable) or manually via the start menu. I have windows XP. There are no relevant messages in the event log.
Avoid the hassles and use a card reader to download your pics.\012 ... Canon PowerShot SD500 / IXUS 700 Digital Camera
My Canon Powereshot 200SX IS does not start properly. Display comes on but the lens stays closed inside and a led blinks. After a while display turns black, a beep comes on and the white text says: there is an error, try to start again. Starting it again brings exactly the same situation. Loosing the battery does not help either. Camera seems not to react to any control buttons. There has not been any any obvious reason for this, no falling onto the ground or any other impact.
See http://www.fixya.com/support/r13011856-lens_error ... Canon Digital Cameras
My cameram each time it starts makes me have to chooose where i live the time and the month again, i just bought the camera a few months ago brand new. i did all the settings and click ok but when i power up it does th whole start up setting again, why is this happening. i tried seting to default but still nothing. i took the battery out and put it back in. still. any help would be great to ge tit to keeop the date and not start the setup again. its a casio exilim 7.2 megapixel ex-z75
The same thing is happening to me with my ex-z75. i don't know what caused it and i'm also having trouble getting it to stay. ... Casio Digital Cameras
Hi I have panasonic Lumix DMC-FZ20 and when I start camera on the display it come with message "plz turn camera off and then on again." But it dont really do anything when restart occurs. It keep showing same message. Although it allow me to see old pics when started with play mode but dont start if the message has already on display. Moreover, when this message is on it wont allow me to work with any of the camera function including zoom in/out. . . Many Thanks . . .
Usually when this message pops up it indicates the lens position is jammed, you will need a camera technician to assess the item for repair cost. ... Panasonic Lumix DMC-FZ20 Digital Camera
Some juice driped in from the top of the camara and now it won't start. I waited for it to dry and won't start. i have tried plugging it in to the computer but won't start at all. I have two batterys and 1 memory card 4GB i tried putting in a different battery and it still won't work....
Your camera is only supporting: \015\012SD/MMC up to 2 Gigabyte and SDHC up to 8 Gigabyte \015\012\015\012Clean the camera and all the contacts with spirit, leave to dry open for at least 24 hours.\015\012\015\012Good lu ... Kodak EASYSHARE M340 Digital Camera
Canon powershot a300 camera, I am having a problem with he start up of this camera, when starting the camera the start up sounds,but the screen view is blank, therfore is unable to capture the image, can anyone help?
So the pics u take are also black and blank but power of camera is there u can see signs on lcd and all info but lcd is blank CCD failure !!Dont worry u can get it repaired free of charge from Canon see the link and call them ... Canon PowerShot A300 Digital Camera
Put a new fully charged battery in - the camera would lasted for a couple of minutes and then would not switch on. The battery works fine in an identical camera. Put in a second battery - that worked for a bit then started flashing battery problem and wouldn't switch on. 5 minutes later - it did switch on - lasted for a short time and then started flashing ERR 99, and then wouldn't switch on again. Battery works fine in an identical camera. 10 minutes later - started working again, but the Sigma
It is due to some kind of electrical contact failure. For more \015\012details and common causes of Err 99 read the following article:http://www.lensrentals.com/news/2008.12.31/canon-err99 ... Canon Digital Rebel XT / EOS 350D Digital Camera with EF-S 17-85mm IS Lens
My Pentax Optio M4 suddenly started to shut down and power off after starting up. It starts up normally, then gives 3 short beeps, then shuts down as if I had just switched it off. I have recharged the battery but the problem still remains. I cannot reset the camera to factory defaults as it doesn't stay on long enough for me to access the memu options.
... Pentax Optio M40 Digital Camera
Slider Prob I've had my S30 for quite a while and lately i've had some problem with the slider opening up. Dont know if something got in between the slider and the cam or something. Anyway with some trouble i could still open up the slider and thus start up my cam but then one day when i was trying to close my cam i started to slide it to close. Finally it closed and i slided the slider onto the lens but then the lens started to open up again. But the slider was in the way so the lens opened up
Dang, what a weird design. The lens needs to go threw a cycle before it can reach the idle position where it waits for a comand from the user. If its in the closed position and you turn it on it extends to its full range then stops at the idle positi ... Canon PowerShot S30 Digital Camera
How do I set the start image? I've tried following the menu commands, but when I select "Start Image," my options are the logo, "off," and then a black box with a question mark. I've selected it, and it shows the option set for "user image," but no start image shows up when I turn the camera on.
After going through the menu and choosing user image, view the picture you would like to set as your start image. Press the button with the E on it that is underneath the zoom button. The screen should then show four images across the top, say the wo ... Samsung L200 Digital Camera
I cant start the flip. i can recharge it (lamp is blinking) but it wont start. even the restart doesnt work... it worked pretty well but then the problem started. im in germany and no one can fix it cos they dont know it over here
Did you get it fixed i have same problem ... Pure Digital Flip Mino Digital Camera
Starting error hi i m nilesh patel from india in my camera starting problem when i start it i see access error and say that turn off camera and on again 15 times i do it but it is not solved
Are the batteries fresh? Can you start it with the charger plugged in?\015\012what error code do you get?\015\012\015\012errors and messages support:\015\012\015\012 ... Sony Cyber-shot DSC-W30 Digital Camera
Sony Cyber-shot N50 camera . When I open my camera and want to take pictures or video it starts to vibrate. If I do not use my camera for a day, it can take few pictures and then it starts to vibrate. It all started just few weeks ago.
... Sony Cyber-shot DSC-T20 Digital Camera
The camera doenst start the ligth of empty battery is flashing the camera dont start
Check for a blown fuse in the DC/DC board. Board is on top after you remove top cover, and the fuses are covered by a shield plate you have to unsolder. Fuses are very small and have letter codes like P or K ... Canon EOS 60D Digital Camera