Having problems with your Canon PowerShot SD750 / IXUS 75 Digital Camera ?

My canon ixus 75 will suddenly no longer turn on. I have tested the battery - it works in another canon we have, and have plugged the camera directly into the computer. Nothing happens.


Answers :

Hi,\015\012
\015\012As per the description you have done all the things in order to fix the device, I think ON/OFF switch may be malfunctioning (shorted) or possibly the camera circuit need to be repaired, you have no other option but to take your device to the canon service center.\015\012
\015\012
\015\012Thanks..!!! \015\012
Hi,

This is a common problem. Most of time the same kind of the problem occur because of some malfunctioning in the circuit board.

First of all we will try to reset the system.. Most of time this fix the issue..

To reset, please Switch off and disconnect it from power supply. Also remove any other units connected to it. Leave the system for 30 minutes then restart it.

If the reset doesn't help then surly the problem is with the circuit board.. Most of time some capacitors goes shorted or get fused because of high electric supply to the unit.

Let me know,if needed further assistance.

Hope i helped you.

Thanks for using ' Fixya ' and have a nice day!!
Repair Help & Product Troubleshooting for Canon PowerShot SD750 / IXUS 75 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My canon ixus 75 will suddenly no longer turn on. I have tested the battery - it works in another canon we have, and have plugged the camera directly into the computer. Nothing happens.


Hi,\015\012\015\012As per the description you have done all the things in order to fix the device, I think ON/OFF switch may be malfunctioning (shorted) or possibly the camera circuit need to be repaired, you have no other option but to take yo ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Canon 450D is not being recognised by my computer (I run xp 32-bit). When I turn on the camera, windows comes up with a "install new hardware" option. I have installed the EOS utility etc. but still the camera isn't recognised by my computer. Anyone have ANY idea? This also happened with my 350D, the only time my computer recognised the camera was when I installed the software package included with the camera. Nothing off the Canon site worked for my 350D, and so far nothing is working for the


Both the Canon XT 350D and the XTi 400D are recognized by any PC with XP windows operative system. It seems you have to check your USB port or USB cable used to connect your cameras to the PC. Sometimes, the PC does not recognize a specific device co ... Canon EOS 450D Digital Camera

I have a flip Ultra HD 2nd gen model: u2120B. I bought it off of eBay, broken. The buttons don't work. The camera is seen by the computer when plugged in. I can format the camera HD and reinstall the software. No change. When I turn the camera on, it goes directly into setup, prompting me to select a language (English). I push all of the buttons and nothing happens. The only button that does anything is the power button. I have taken other flip cameras apart and replaced the LCD, lens, res


... Digital Cameras

When i plug my usb into my computer to put photos on nothing happens. this has never happened before ive had the camera for 1.5 years. there is nothing wrong with my computer as it works for my ipod and my sisters camera usb


I have had this problem with Canon cameras, it seems to be a bug in their software. What make and model is your camera?\015\012\015\012My solution was to manually open the camera transfer software, and manually select all images for down ... Digital Cameras

Hi, I have a Canon Power Shot G10, Serial Number 7021002939. I'm making the first ever attempt to download photos from the camera to my MacBook Pro. I wish to use iPhoto to download to the computer. I have plugged the USB cable into the computer and into the digital terminal of the camera. I have pressed the Playback button. FYI, I have also downloaded the Canon Digital Camera Solution Disk. The Canon program will not download the photos, either. Nothing happens. I have tried t


Do what the pros do....use a card reader instead of the camera. When you plug it into the USB port, an icon will appear called "NO NAME". Double-click on it and the pics will open in "preview". From there, you can import them to a folder you create o ... Canon PowerShot G10 Digital Camera

Hi, I have a Canon Power Shot G10, Serial Number 7021002939. I'm making the first ever attempt to download photos from the camera to my MacBook Pro. I wish to use iPhoto to download to the computer. I have plugged the USB cable into the computer and into the digital terminal of the camera. I have pressed the Playback button. FYI, I have also downloaded the Canon Digital Camera Solution Disk. The Canon program will not download the photos, either. Nothing happens. I have trie


1. With the camera on and in playback mode, plug the cord from the camera into the Macbook. It should appear on the desktop as a drive, probably called "no name". If it doesn't, don't worry...the next solution always works and it's the one the pros u ... Canon PowerShot G10 Digital Camera

When i plug the camera into the usb computer port nothing happens I do not get the auto play screeen that asks if i want to download the videos other devices that i put in the computer usb port wotk. I last used the camera on monday 4-4-11 and it worked when i plugged it int the computer


... Digital Cameras

I cannot get the pictures off the camera. When I plug it into the computer the program will not recognize this camera my canon A590. So I am unable to download my pictures. I do not have this problem with any other of my cameras. At first I thought it was the usb cable, but I have tried other cables and they do not work either. Any Ideas. I use a mac computer and Iphoto program. At times, I have gotten it to work, but now nothing. Please help thanks T Riley


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot A590 IS Digital Camera

I have a canon A590 is camera. When I try to upload pictures onto the computer and plug the camera into the computer nothing happens.The camera does not power on like its suppose to. Why is this? I know the Usb cord works because I tried it on another camera. Do I need to have the cord that came with the camera or can I use any USB cord. Thanks you


Your USB cable is fine, I use a generic cable with my A590 with no problems. Connect the USB cable to the camera then your computer, make sure that the camera is set to the view setting instead of picture taking setting and then turn your camera an. ... Canon PowerShot A590 IS Digital Camera

Hello, I cant get my computer to recognize my camera (Canon powershot SD780) when I plug the USB cord into my computer from the camera nothing happens. I click on computer and it is not in there. I am using Vista Home Premium. Any help is appreciated. Thanks! Brian


Try using a card reader instead of your camera. ... Canon PowerShot SD780 IS / IXUS 100 IS Digital Camera

Canon A430 Can't transfer photos from camera to computer. It used to work just fine, but not anymore......I plug the USB cord into the computer, then into the camera, then turn the camera on and NOTHING.......


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Canon PowerShot A430 Digital Camera

MY COMPUTER HARD DRIVE WAS JUST REPLACED AND I CAN'T GET MY DIGITAL CAMERA TO DOWNLOAD TO MY PC. IT WAS WORKING FINE BEFORE THIS HAPPENED. EVERYTIME I TRY AND DOWNLOAD I GET THE MESSAGE THAT THE PC CAN'T CONNECT TO THE CAMERA. I HAVE CHECKED MY ELE PLUG IN THE POWER IS ON AND I HAVE CHANGED THE USB PORT SEVERAL TIMES AND NOTHING SEEMS TO WORK. I HAVE AN EBAY BUSINESS AND NEED TO DOWNLOAD MY PICTURES BAD. CAN YOU HELP ME? THANK YOU


... Digital Cameras

When I put my memory card in my camera it says Err Cf and won't let me take pictures and won't show any of my previous pictures on the card on the screen on the camera. When I put the cf card in my card reader and plug it into my computer, nothing happens. The computer doesn't register the card at all and I tried putting a different memory card in the reader and it worked so it definitely isn't the card reader that is the problem. I don't care if the card is broken but I have a bunch of picture


Hi There.It sounds to me from what you described that the card has gone. Unfortunately , with volatile memory such as flash drives or memory cards a recovery is usually not possible as the chip where the data is stores is destroyed. ... Canon Rebel XT / EOS 350D Digital Camera

I have a canon power shot A540 and i always pluged it into my camera to upload pics now when i plug it in nothing happens, the camera says nothing and niether does the computer. what can be the problem.


You can blame windows update for your problems. Now, get yourself a separate card reader and use it for downloads from now on. ... Fuji FinePix S1000FD Digital Camera

Can't upload pics from easyshare m340 to easyshare software. Camera is 3 months old. I have downloaded pictures once before but for some reason I can't seem to get it to work this time. I hear a sound when I plug in the camera to the computer, but nothing happens. I don't see an error message anywhere. I've only uploaded pictures one time before and I seem to remember it starting on its own once it was plugged in.


Get yourself a card reader and use it to download your pics. ... Kodak EASYSHARE M340 Digital Camera

I have had my Fujifilm finepix z35 for a few months now. I have never had any problems uploading my photos to my computer using the usb lead. Now suddenly, it will not work; I plug in the usb and turn the camera on and there is a white screen on the camera, with usb in top left corner. Nothing happens on the computer. Please help, it's very annoying!


Do you have to use the USB connection? The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or F ... Fuji FinePix A345 Digital Camera

I got this powershot canon camera at a garage sale. i plug it into the computer and nothing happens. It didnt come with instructions or software. Just a usb cable and the camera itself. How do i upload the pics ive taken to the computer?


Use a separate card reader. ... Canon PowerShot SD500 / IXUS 700 Digital Camera

When I connect my camera to the computer I don't get a popup window asking what I want to do with the camera. When I first got the camera there was no problem but after getting a new HD and reinstalling Windows XP and the Canon softwareI I can't seem to get any pictures off the camera. I do get the sound from Windows when I plug the camera into the usb port and turn it on that it recognizes somehting is there but then nothing else happens. Also when you turn the camera off Windows makes the soun


You might be able to type play back in your search bar under the start menu depending on your computer and o.s. (operating system) and bring up that window. ... Canon PowerShot A620 Digital Camera

How do i upload pictures onto my computer from my camera? I tried mutiple times, but it still wont work. I tried plugging it into the computer after i turn on the camera and i tried to turn o the camera after I plugged it into my computer. I even tried to plug it i without turning the camera on. nothing seems to work, can you please help me?


Simple...use a separate card reader. ... Pentax Optio M30 Digital Camera

I have had a Kodak EasyShare DX7440 digital camera for 4 years now. Just recently the camera stopped transferring photos to my computer. When I plug the camera onto the cable, nothing happens; I don't even get an error message. Everything else is working fine. Why am I having this problem?


You could have a bad cable, or your usb port might be bad. Check the port by plugging another device into it, and replace the cord with another one, if you have one. \015\012An alternative method to use a card reader on the usb port. You ... Kodak Digital Cameras

I am unable to get my nikon coolpix l11 to install on my computer that has windows xp. I downloaded and installed nikon transfer 1.5.3 for windows and i installed it but nothing happens. I plug my camera into usb port on computer and nothing happens. when i choose to add hardware the computer does not find the camera. my camera has an sdisk in it. I also changed the camera to usb mode by going into the menu of the camera and choosing usb mode.


Consider NOT using the USB connection.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Nikon Coolpix L11 Digital Camera

The software for the power shot A480 worked up to about amonth ago. Now when I try to download my photos to the computer nothing happens when I click on to Camera window and when I go to Canon Utilities and do it that way still nothing happens.also the other software willnot open.


Please un-install the driver software/ utilities from the PC. while doing this the camera must be removed. Now after it was un-installed shut down the PC and restart. now reinstall the canon drivers . Once installed connect ... Canon PowerShot A480 Digital Camera

When I plug my camera into my computer, absolutely nothing happens. It doesn't register at all. Have downloaded photos zillions of times before and there have never been any problems. It worked on another computer recently. Any suggestions?


If your camera is working with another computer to connect then the fault can be that your PC is having some fault in the OS.\012If so restore the PC to an earlier set date. USe an antivirus to scan your PC for detection of any malwares.\ ... Canon PowerShot SD1100 IS Digital Camera

My camera is on and working. I plug in the usb adapter to upload pictures and the screen goes black and nothing happens on my computer other than a beep acknowledging something has been plugged in - it doesn't say what just a sound. What is wrong?


Reinstall the driver ...for the camera ..if it doesn't need one ...after recognizing it ( beep) ...take a look into my computer ...and probably will find the card ..like a removable device ..and can copy paste picks from it ..if it is not locked from ... Digital Cameras

Sd cards not working in my computer so i bought the usb cable, plugged camera in plugged usb into port and nothing happens no drivers.been looking for hours for the software and drivers can't seem to find it.can you help me?


Please get it here :\012www.softwarepatch.com/utilities/dimage-driver.html \012\012 ... Konica Minolta DiMAGE Z1 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5905 seconds