Having problems with your Canon PowerShot SD770 IS / IXUS 85 Digital Camera ?

Canon IXUS 85. Last time i used my camea was last night, it worked fine when i went to show a friend a video i had taken and it worked fine, i don't remember knocking it, but i went to turn it on this morning and the screen was blank, i fully charged my lithium battery and tried again, and took the memory card out, put the picture on my laptop and put the card back in at the same time as the battery. I tried to then turn the camera on and it went on showing the sceen for a second before going of

Answers :

It may be a lens problem...try these:\015\012Fixing a Lens Error on a Digital Camera
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Canon PowerShot SD770 IS / IXUS 85 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Canon IXUS 85. Last time i used my camea was last night, it worked fine when i went to show a friend a video i had taken and it worked fine, i don't remember knocking it, but i went to turn it on this morning and the screen was blank, i fully charged my lithium battery and tried again, and took the memory card out, put the picture on my laptop and put the card back in at the same time as the battery. I tried to then turn the camera on and it went on showing the sceen for a second before going of

It may be a lens problem...try these:\015\012Fixing a Lens Error on a Digital Camera\015\012\015\012This has t ... Canon PowerShot SD770 IS / IXUS 85 Digital Camera

Help please last time i used my vivicam 5340 digital camera it worked fine. i have been trying to turn it on for the last couple of days and wierd stuff has been happening.the welcome screen comes on when i press the power button.I see the battery symbol comes on and then it goes off.i have been trying it now for a while and the same thing happens each time. i recharged the batery and tried again to put it on. that didn't work. I placed it on external power, that didn't work either(i took out th

See if keeping the power button pressed continuously without\015\012releasing keeps the camera on ... Vivitar ViviCam 5340s Digital Camera

Frozen Camera I have a Panasonic Lumix TZ3 digital camera. The last time it worked, the screen went checkered, so i turned it off. But upon turning it off, the lens of the camera stayed out like it was taking a picture. Now it won't turn on. I've tried recharging the battery, changing memory cards, no memory card, switching settings and turning the on/off switch. Is there anything to be done or I do I just need to get a new camera?

Try letting it drop about 4 tto 6 inches on a hard service covered by a paper towel. Don't let it land on lens of course. You can remove the mem card. It has 13Meg of internal. ... Panasonic Lumix DMC-TZ3 Digital Camera

My camera is charged but for a while when i turn it on the screen is just black and my pictures do not come out. It has been doing this for a while but on and off and would usually start to work again after a while. Now it hasnt gone back to normal for a long time and i cant take any pictures. i tried taking out the battery and memory card and putting them back to refresh it but it still wont work. Its the last week of school and i need my camera to work asap !

Some times it works and sometimes not, it is due to loose contact.\015\012Try cleaning the battery terminals to remove oxidation and other coating formed due to atmoshphere, ensure memory card terminals are also well cleaned and battery is char ... Digital Cameras

The last time I used my PowerShot S3 IS it worked just fine. I went to get it this time, and I could only preview saved photos. When I turned it to take a picture, their was only a black screen? Other than the white type, just not picture. And yes, I had the lense off. I did also try new batteries and it didn't make a difference.

The connection from ccd to camera has failed, probably due to dry joint, Canon dont own up to this, so it s shell out about \302\243140 for a repair or chuck it in the bin!!! ... Canon PowerShot S3 IS Digital Camera

Lens Error I purchased a Nikon P90 a month ago; and it was working just fine. A couple of days ago during a photo shoot (after taking 190+ photos without any trouble), the camera went crazy.. It shows a lens error when turned on; asks to 'remove the lens cap' even if it is already removed. The lens starts to zoom out & in for a couple of times; then this error message comes up and just hangs. Tried removing the card, battery and even tried re-charging the cell. I purchased it from UK, and I'm n

This is probably THE most common failure among digital cameras. There's a halfway chance of fixing it yourself, described here: http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html ... Nikon COOLPIX P90 Digital Camera

My fujifilm finepix s700 camera won't turn on when i try it. i put in new batteries and everything, but no result AT ALL. no beeping, no nothing. It has never done this before, it worked completely fine up till now, i think the last time i used it was 2 days ago. I don't think it got wet or dropped. what can i do?

... Fuji FinePix S700 Digital Camera

My canon rebel xsi was working a month ago. Today I took it out from the case and found it was not reading the card (8gd transand). It had been working fine until last time I used it mid of April. Thought it was a card problem, I went out to buy a new one (8gb sdhc), put it in and it asked for reformat. Proceed to reformat the card, but it says it can't reformat it and ask to change the card. Put in the old card (which was loaded with picture I previouly took), it asks the same thing. I'm 100% s

The reader in the camera has gone bad. You can get it repaired by anyone who fixes camera's or by sending it to Canon which will cost you more then finding someone in your home town that repairs cameras. Just FYI the repair is somewhat costly roughy ... Canon Digital Rebel XTi Digital Camera

We just received our brand new canon t3i in the mail. We formatted the card (a 2GB 700X Professional High Speed Error Free (SD) Memory Card Class 10) and immediately started shooting to test out the camera. Everything seemed to work fine until we tried to apply a filter to one of the photos. The entire camera froze. We even tried turning the camera off and it would not shut off. We ended up having to take the battery out and put it back in. When we did and turned the camera back on we received a

Sounds like there was an error while the camera was writing information to the card. You can try reformatting the card using a computer and a card reader, then replace it in the camera and format it from the menu. If that doesn't work and the camera ... Canon EOS 600D Rebel T3i Digital Camera

My camera will not charge. It was purchased just short of a year ago, so here is no reason for the battery to be broken. It will not charge at all when the memory card is inserted and when it is, the charging light links four times and then stops. I last used my camera about 2 months ago and it worked fine. The battery died during the last use and I am trying to charge it for the first time since.

Hi,\015\012It almost sounds like the battery won't hold a charge anymore which means you need a new battery. Since the camera isn't quite a year old yet I'd suggest contacting Nikon and seeing if they'll do anything for you before you buy a new batte ... Nikon Coolpix S4000 Digital Camera

When I turn on my Nikon coolpix S210, it gives me a lens error prompt. I have read posts on another website and it said everything from hold the lens out by force to turn the lens slightly clockwise while it is out to rap it slightly a few times, to changing battery to taking the camera apart. Short of taking the camera apart, I have tried them all. Nothing works. I just put alot of money into the camera buying extra picture cards, batteries, etc. NOW IT WON'T WORK! And there doesn't s

Your only other option is to take the camera apart. Sending it in would cost as much or more then a new camera. Really you don't have much to lose because right now the camera is broken. I will link you to one helpful site that has a write up tearing ... Nikon Coolpix S210 Digital Camera

Camera is 5 years old, It has been working fine. Batteries had become low and when I put new batteries in the camera switches on. the , the flash open, the viewer window lights up with set time and date option. The program dial shows low battery but I have tried three different sets of batteries. I have left the camera turned on as I write this and after a few minutes the lens does extend but when I tried it again it will no extend immediately as it should.

Make sure the batteries are the correct type and voltage for your camera. Also because of the age you may have corrosion on the battery contacts inside the battery compartment. If this is the case then no matter how many batteries you try they will n ... Digital Cameras

Put a new fully charged battery in - the camera would lasted for a couple of minutes and then would not switch on. The battery works fine in an identical camera. Put in a second battery - that worked for a bit then started flashing battery problem and wouldn't switch on. 5 minutes later - it did switch on - lasted for a short time and then started flashing ERR 99, and then wouldn't switch on again. Battery works fine in an identical camera. 10 minutes later - started working again, but the Sigma

It is due to some kind of electrical contact failure. For more \015\012details and common causes of Err 99 read the following article:http://www.lensrentals.com/news/2008.12.31/canon-err99 ... Canon Digital Rebel XT / EOS 350D Digital Camera with EF-S 17-85mm IS Lens

I have a Bushnell Trail Sentry Model 119320C and I leave it out for about a week at a time, I bought the camera new last year and used it last year and it worked fine, I put it put this year and it worked fine the first week it was out, now every time I go to check for pics, the camera is off, I put new batteries in it thinking that the batteries are not good and it still did the same thing, the camera is off when I check it, its saying that it has like 2000 events taken and only like 3-10 pictu

... Digital Cameras

Hi. I have a finepix jx250 digital camera. The camera lense keeps going in and out and there is a messege that says to turn the camera off and on again.. I did that but it still did the same thing. I tried pressing the shutter and power button at the same time. I tried pressing the power button and the menu/OK button at the same time. I tried taking the battery out and putting it back in. I tried taking the battery and the memory card out putting the battery back in and leaving the memory card o

Hi,Checkout this tip about digital camera error messagesLens Errorfix for Digital Cameraheatman101 ... FUJIFILM FinePix JX250 Digital Camera

Blurry pictures I got my camera out for the 1st time in about 5 months, turned it on and it all the sudden WILL NOT FOCUS on ANYTING. No warning signals or nothing. It worked fine last time I used it. I changed the batteries and still no good. Tried all modes but still just a blurr. You can point it a different stuff and you can hear the sound of the lens focusing, but sitll just a blurr. Tried it inside, outside, up close and far away but just a blurr. Even took a picture & downloaded it to my

I just checked out the canon website, there is a link there regarding the CCD image sensory advisory. They are aware of the problem of all of a sudden getting a blurry picture and will fix it for free. Just call the toll free number on the site and t ... Canon PowerShot A75 Digital Camera

Displays all white in all modes. Kodak V570. Turn the power on and all I can see is white. I have tried a different battery an no battery, just power cord. I know the camera good enough I can go into the menu options and select some different features without actually seeing the menu. All that seems to work fine and the lens is working ok. I can push the shutter button, the flash goes off. I can't see the photo on the camera, but I can see the photo if I put the SD card into my computer. Please

Displays all white because all the color screen have RGB mode if any of mode's are not work correctlly it's mean's color chip was fail and not working. u have to repair ur camera and change ur display screen. ... Kodak EasyShare V570 Digital Camera

My 4 GB memory card seems to have gone bad. I've used it for months and always fine. When using it last night it just went out. If I have it in my camera my camera will not work. If I take it out the camera will come on. I tried putting it directly in the printer slot and it tells me Memory Card Error. Is there ANY WAY to retrieve my pics off of this card??? Thank you, Mamie

It is possible to recover data from flash memory in certain circumstances.  Seagate offers data recovery services for situations like this.  It is however rather expensive I think services start around $1000.   ... Digital Cameras

Blackout i was shooting RAW with sandisk extreme III, turned it off, and when i wanted to turn it on it couldn't. recharged battery, and it couldn't. than i took my friend's 350 also, and it worked with my battery, so i put my card in it and it just couldn't turn on.also can't turn on without card or some other. seems like some virus, but extreme III? card reader also dosen't work any more. what went wrong? in the meantime camera didn't fall, card wasn't ejeted.

No virus on canon Dslr. Try another flash card and another battery. Some of them is bad stuff ... Canon Rebel XT / EOS 350D Digital Camera

Ok so ever since i went to the beach when i got home every time i click the power button it says "zoom error" ive tried pulling the lense out ive tried blowing any particales that could have been in the lense out ive taken out the battery and memory card and put them back in and it still isnt working please help.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... FUJIFILM FinePix J40 Digital Camera

I have a Fujifim finepix f47(fd) The camera was working fine until last week, basically I can turn the camera on fine and use all the menus etc. My problem is after I take a photo the camera crashes/freezes and thats it you cant do anything else unless you take the battery out however im back at square one again. I have tried using the camera without an sd card as the camera itself has some internal memory. Same problem.

Your camera needs to be formated by memory and need a good Anti virus for SD memory card.. its NOD32 best you USB's and Memory cards ... Fuji FinePix F470 Digital Camera

Sony Cyber-shot DSC-H2 turns on sporadically. Once on it works fine. Shut it off and try to turn back on and it doesn't. Repeated pushing of the power button maybe 30-40 times and it turns back on again. Once you get it on it Works fine. Turn off and when you want to turn it on again must push power button over and over to get it on again. This happens with brand new batteries and with rechargeable batteries that have been fully charged. Any assistance would be appreciated. Doug Clark

Hi,It seems power button is not working properly and needs little force to send command to camera.Please press PLAY button on camera (it is located nearby power button) and check, does camera turn On in playback status instantly or giving ... Sony Cyber-shot DSC-S700 Digital Camera

I went snorkeling with my olympus 780sw camera last weekend and was taking photos just fine. It was nearing the end of the battery life I believe and when i went to try to turn it on, nothing happened so I thought it had died(battery) I went to try and charge it, and the red light comes on, but it only flashes and does not stay solid, even after letting the battery sit in the charger for >5 hours. Is there a problem with my battery then? the charger? the camera and battery combined? any assistan

That happened to me, then i put the battery in the same kind of charger and it started charging fine. ... Olympus Stylus 790SW Digital Camera

Samsung digimax s1000 turned on before, lens came out then shut off.power light blinks when you try to turn it on. but will not turn back on. lights up only when button pressed. tried different batteries. Using N-Mi Rechargeable batteries. Tried with sd card Worked fine the day before. But, it looks like the lens did not come all the way out and the first lens is at an angle to the second. Gears stuck maybe? Don't remember interfering with the lens when it was turned on. If it's the gears being

Follow this link and i would try step 8 and/or step 9http://www.wikihow.com/Repair-Lens-Problems-on-Your-Digital-CameraI am a ... Samsung Digimax S1000 Digital Camera

I have a canon SD1100 I just purchased and after a few minutes the camera will not shut off, the power button won't work and I have to open the battery cover to turn it off. Somehow this completely drains the battery too every time even if it was just charged. Also the camera turns itself on by itself about 10 minutes after you put the battery in it and once again you can't turn it off. I got another battery and the same thing happens. Otherwise it works fine.

If this is a new camera, you should be running back to the store to return it. ... Canon PowerShot SD1100 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5459 seconds