Having problems with your Canon PowerShot SD790 IS Digital Camera ?

Replacement screws need replacement screws for bottom plate where the camera strap fastens to


Answers :

FYI\015\012I just called Canon (1-800-828-4040) about the screws.\015\012
\015\012They are sending 2 screws out to me free of charge "as a one time courtesy." \015\012
\015\012Perhaps they got lots of complaints.\015\012
\015\012Thanks for your help\015\012
\015\012Mitchell\015\012
Those screws always fall out, you can get replacements easily online and make sure you put a little "Locktite" on them to hold them in so they don't fall out again.

If you do a Google search for "Canon SD790 screws" you will see a listing at about the #9 position where you can buy them for about $6 for the pair including shipping.

Hope this helps!

Thomas Drayton,
Owner Darntoothysam com
Affordable Digital Camera Repair
Repair Help & Product Troubleshooting for Canon PowerShot SD790 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Replacement screws need replacement screws for bottom plate where the camera strap fastens to


FYI\015\012I just called Canon (1-800-828-4040) about the screws.\015\012\015\012They are sending 2 screws out to me free of charge "as a one time courtesy." \015\012\015\012Perhaps they got lots of complaints.\015\012\015\012Thank ... Canon PowerShot SD790 IS Digital Camera

We have a nikon coolpix S220 and we need to replace the screen. We have the screen but can not get the three screws out on the bottom of the camera (the side where the battery is located). All the other screws came out very easy and these three will not budge. do you have any suggestions?


I would take it to a camera repair shop and give them $5 to help me take them out. They usually come out with no problem, so they might have been loctited in or something. Of course, the idea is not to strip them, so make sure the right phillip ... Nikon COOLPIX L10 Digital Camera

Kodak C633.... Hello....I would like a few suggestions on what i can do. It was a few weeks ago while grabbin' my camera an when i pulled it outta the case it slipped b4 I got a hold of the strap an it dropped onto carpet. Everything works fine on it except the LCD screen shows horizontal lines that are spaced a pinky finger apart from top to bottom. Can still make out pictures an stuff..the lines are about a finger-nail of thickness. Do I need to replace the LCD? An if I don't...how long will i


No It can be replaced for under 100.00 and you keep your camera. It is a pretty easy fix. ... Kodak EasyShare C633 Digital Camera

I need to replace the front cover on a kodak Z612 camera I have the back off but I believe I need to reone the lens the button to take photos with fell off in a park and they told me I need to replace the whole face plate thank you


... Kodak EasyShare Z612 Digital Camera

My camera will power on only with the front of the body off. I have the front of the body/face plate, 6 small screws and a tiny paper punch sized piece of thin foam out. Everything else is assembled. It will fire up and take pictures without the front of the body/face plate on but as soon as I put it together, it will not work any picture taking functions only the review and set up functions will work. I can also fire it up with the front face plate off replace the front face plate and use the c


... Sony Cyber-Shot DSC-W5 Digital Camera

Bought in 2005 and have enjoyed its marvelous pictures. I put new batteries in, checked the ''all but empty card'' by seeing if it would download to computer; it did, no problem there. But, when I turn on the camera today the image in the camera's LCD shows what it sees with a quarter inch white bar at the top and flickers with a slow roll of the image viewed. The colors are also slightly off. I do not remember dropping the camera. I noticed that the screw plate on the bottom edge had one


If it is Canon A75 camera then its known problem of bad ccd iamger and canon will repair it free of cost.Click ... Canon PowerShot A75 Digital Camera

I have a replacement LCD display for my Finepix S1000 FD camera. I can remove all the screws, but the cover will not come off. There are two small screw like pins on the bottom on each side of the tripod connection but they are not standard tips. Can you give instruction on how to correctly remove the cover. I am fairly hardware proficient as I service pc's and printers.


... Fuji FinePix S1000FD Digital Camera

I AM TRYING TO FIND A REPLACEMENT PART FOR MY Quantaray QSX9002D TRIPOD MADE BY SUNPAK. I HAVE MISPLACED THE CUSTOM SQUARE-SHAPED HARD-PLASTIC ADAPTER MOUNT THAT SCREWS INTO THE BOTTOM OF THE CAMERA... AND THE SQUARE BOTTOM FITS INTO A MOLDED RECEIEVER ON THE TOP OF THE TRIPOD. WHERE AND HOW CAN I GET ONE OR TWO MORE OF THESE ADAPTERS??? THANKS MUCH. Gary


Quantaray Tripods are sold by Ritz/Kits/Wolf Camera as their house brand. Please check with this company for replacement parts for this product. ... Digital Cameras

I bought a replacement LCD screen for my Nikon S3000 camera, but when I remove the back case, the connector for the LCD is under the silver plate. I can't figure out how to get the plate off to reach the connector so I can install the new LCD. I've removed screws, but it still lifts only halfway. Is there some kind of trick I'm not seeing to get this thing open?


Hi dear Sir, contact uscamera.com to obtain a repair manual.Regards ... Nikon Coolpix S3000 Digital Camera

Dsc-t9 gyro fix. The camera shakes and pictures come out blured. Thought I'd ask before pulling it apart. I'm guessing the gyro is busted, so maybe someones knows whether it just needs a screw tightening, or if I need to replace the gyro or whether it is possible to fix at all? Thanks!


If you alsow get vibrationOn Sony T100 and similar, its the vibration canceling unit, i had the same problem.if you have good hads you can fix it.( on your ... Sony Cyber-shot DSC-T9 Digital Camera

I have a Canon G6 Powershot camera. My problem is that I have lost the two screws that hold the LCD screen housing together. Apparently they fell out at some point and I now need two replacements to keep the front and back together on the screen so that when I rotate it, it doesn't separate!! Anybody know where I can buy these two tiny screws? Thanks! MMM


Have you contacted Canon Support and asked them about this?\015\012\015\012Ask them if you can buy from them or from a third party, Canon authorized repair center.\015\012\015\012You might also Google Canon G6 Powershot Parts! ... Digital Cameras

I have a Canon Powershot A560. The date and time stamp do not work. I checked the manual and it says to replace the battery located under the flip-up panel on the left side of the camera. I can not remove the cover plate. Where can I get help to fix this problem? I need the camera on October 13th.


Think your problem is that you are looking in the wrong spot. Don't know why your manual is telling you to look there (are you sure your manual is for the A560)? \015\012\015\012Your CR1220 date/time battery is located in the regular battery ... Canon PowerShot A560 Digital Camera

I have a Coast brand camera tripod, I need the quick release (screw /pin) plate that connects a camera to the tripod.


You will need to know the model of the coast tripod or at least the measurements. Go to this website for pictures and models supplied: http://www.tripodquickrelease.com/Generic_Tripods.htm ... Digital Cameras

Dropped the Powershot A630 camera - still works (LUCKY). However, need to use rubbers bands to secure the battery cover as front cover latch will not fasten (tab broke). Bought front cover and need guidance on disassembly and tips to replace it.


So get ready with your screw driver.\015\012\015\012I am posting a link below... will give you an idea of how to disassemble a A650... The assembly will of course be in the reverse direction.\015\012Keep the screw carefully... You w ... Canon PowerShot A630 Digital Camera

I need to replace the LCD screen on my DSC-W80. I am used to working on electronics, so it is really only a question of getting access to the inside of the camera - basically is it obvious which screws need to be removed or are there any hidden issues?


It would be not a problem for you. Just remove the screws around the camera. I remember there is a screw near the hand strap holder, you may need to remove the hand strap first. And you need to remove the release block assy when disconnect the LCD ca ... Sony Cyber-shot DSC-W80 Digital Camera

I need the plate and screws that cover the side of the camera with the wriststrap holder on a Canon SD790IS.


Those screws always fall out, you can get replacement parts online and\015\012 make sure you put a little "Locktite" on them to hold them in so they \015\012don't fall out again.\015\012\015\012If you do a Google search for "Canon sd790 h ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera

Ref: Panasonic Lumix DMC-TZ1 Camera. The cover plate over the LCD screen cracked (left side). So far, the LCD display itself is not affected. Is it possible to replace just the cover plate without having to install a new LCD unit? If so do you have a part number for the plate? I understand that cracking of the LCD screen is a recurring problem with the Lumix series of digital cameras and also that Panasonic has taken a hard line r.e. guarantee coverage. My camera is 2 months old.


Sir/madam,please do contact Panasonic with your complaint, this is the only way we are ever going to get this problem resolvedthanks ... Digital Cameras

Kodak EasyShare C643 Digital Camera - replaced broken battery door


Thank you for shearing your successful history, U help us all to continue trying our best to help others.\015\012\015\012"Congratulations" \015\012\015\012remember fixya.com in your next ... Kodak EasyShare C643 Digital Camera

Dear experts Camera model: canon power shot D10 Camera suddently "dead"..Battery charged undtil "Ready".After replacing in body, camera still dead. Only sign of life, very dimm orange LED emitting. After 14 hrs. camera can now turn on, but responding from shutter bottn or other control/setting. The picture "play" botton only show last picture. Is there a "Reset" bottom or a bottom combination, which make a reset.? Lokking forward to get an answer.Thanks to experts.


You got a dud camera. Contact Canon for a replacement. ... Canon PowerShot D10 Digital Camera

I am in need of a replacement flash bulb for my Canon S3 SI camera. Does Canon or anyone else sell them? I am also looking for a replacement flash for my Canon Powershot S3-IS. It stopped working and I can't find anything about replacements anywhere. I do not want to buy a new camera. Please help!


You can buy in Ebay a broken camera, and get the parts you are lokking for, or send them to a professional camera repair center so they are fixed properly.\015\012\015\012Best regards, ... Canon PowerShot S3 IS Digital Camera

Screw missing casio exilim 6.0 mega pixals digital camera EX-Z60. I am missing a screw on the side of the camera. Where can I find a replacement screw?


Try a watch repair shop. ... Casio EXILIM ZOOM EX-Z60 Digital Camera

Have a Runway Digital Camera Kit (82690) that I can't find information for on your website. The snap button broke and fell inside of the camera the first time used. Could not take it back to Wal-Mart because I bought in November as an X-mas present and it was past 30 days. Need to contact company for a replacement. What do I need to do to get a new camera. I have the original purchase receipt.


When I Turn On The Camera THe Green Light Comes On It Beeps 3 Times Then Turns Off ... Polaroid i634 Digital Camera

I need to find out whare I can get a replacement AV cable for my JVC Hard Disk Camcorder, to connect to my TV for playback. The Model no of the camcordia is JVC GZ-MG130U. There is no part Number listed in the manuel. I tried a genaric cable that fit the camera but the picture was dark and distorted. I beleave there is a problem with the shielding in the cable. I need to get an original equipment cable identical to the one that came with the camera so that it is compatable with the camera.


You can get required AV cable for GZ-MG130U model from JVC Accessories. ... JVC Digital Cameras

My problem is with the vivicam 3188 camera. I cant get the flash to come on. The manual only says it will noy come on if the batteries are needing to be replaced. Well my problem is I bought this camera on line and recieved it about 5 hrs ago and it came with name brand ones. The flash did work earlier. The camera has the flash off icon on. But by the manual the button I need to press to turn the flash on doesnt turn it on. Please help


Remove the batteries from your camera and the press the power button for few seconds say 20 sec , then release it.. put the batteries back to ur cam n try... tis is how u reset ur camera.... try tis ... Vivitar Digital Cameras

The lcd screen on my camera cracked, and it had a dark spot on it. I bought a new screen to replace it. I replaced it, but the only thing that happens its the the camera lens opens and everything stops. The lcd screen doesn't come on, and the camera wont power off. is there something that i am doing wrong, or that I need to do to get this to work? thanks, Lavoia


Maybe you installed the LCD screen wrongly and it doesn't respond if not properly installed. ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4995 seconds