Having problems with your Canon PowerShot SD800 IS / IXUS 850 IS Digital Camera ?

My LCD goes partially black when I turn the camera on and shows a diagonal display of the photo from the upper left hand to lower right hand corners. The amount not black is not sufficient to take photos. I can make the LCD give a full display if I "jiggle" the photo settings devise from view to photo. I have tried this about thirty times and it always restores the LCD. I asked Canon Service Tech Support if the problem merited repair. Of course they said yes, but the flat rate they charge

Answers :

Hi , i think you need a lens alignement;;
\015\012and focus adjustemt
\015\012hope that will help...
\015\012goo lucks;;but if iw
\015\012as in your place
\015\012i will try to find another one the price get very low for this kind of camera....
Repair Help & Product Troubleshooting for Canon PowerShot SD800 IS / IXUS 850 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My LCD goes partially black when I turn the camera on and shows a diagonal display of the photo from the upper left hand to lower right hand corners. The amount not black is not sufficient to take photos. I can make the LCD give a full display if I "jiggle" the photo settings devise from view to photo. I have tried this about thirty times and it always restores the LCD. I asked Canon Service Tech Support if the problem merited repair. Of course they said yes, but the flat rate they charge

Hi , i think you need a lens alignement;;\015\012and focus adjustemt\015\012hope that will help...\015\012goo lucks;;but if iw\015\012as in your place\015\012i will try to find another one the price get very low for this ... Canon PowerShot SD800 IS / IXUS 850 IS Digital Camera

Sd110 lcd My LCD did not work, canon repaired it....GREAT! but 2 weeks later it died. It was blank so I send it back and canon says they want money to fix. Damn.. It still takes photos with no problem. I cannot access any functions because the LCD won't work. I've tried the Display button and got the black and white screen of death. I have to take the card out to transfer photos. Canon says"UNIT HAS IMPACT/PRESSURE TO LCD". Do I need a new LCD or what. thanks, steve stokes

I have had my LCD screen go out in my small point and shoot as well, though i did not even bother with my company for the warranty was far expired. You could do a couple things. You could buy an LCD screen off ebay, or anywhere you can find it ... Canon PowerShot SD110 / IXUS IIs Digital Camera

My Canon 40D LCD monitor when displaying a photo has just started displaying white sections of a picture as alternating black then white. The rest of the photo is fine just the white flashes. Any idea what is wrong with it?

It's possible that your Highlight Alert is enabled. Over-exposed areas of your image will blink to indicate blown-out whites. If you don't like this feature, go to the Menu, under the second blue tab (for playback), look for Highlight Alert and Disa ... Canon EOS 40D Digital Camera

Blank lcd I just got a new canon 600D. After playing with it for a while, i turned it off. Then after 5-10 mins i turned it on once again, and opened the lcd screen, but it shows blank(or say black). I can see that the lcd backlit is workeing, but nothing (no content) is displayed. Can this be an issue of low battery ? pressing the shutter button full also not capturing the picture. Flash works though, and optical view finder too, but it does not capture the photo.

Hi there:Some symptoms of a defective CCD include distorted images or abnormal colors, scratchy purple lines, blank or black pictures, and/or black videos with good sound being recorded on the camera's flash card. ... Canon EOS 600D Rebel T3i Digital Camera

Hi, I have a Canon IXUS 95IS camera.. For some reason, when I attempt to take a photo, the LCD screen isn't displaying what is actually in view? In movie mode it comes up on the screen but when i flick it to Auto or camera mode, the screen goes black and only shows the little icons... Weirdly enough, it still takes the picture but the really annoying thing is it doesn't show up on the screen what you're taking a photo of so it makes it really hard for the person taking the actually photo... can

Ah yes! you have pressed the display button. Turn the camera on and you see the icons in the display, look for the Disp button and press it, the display will cycle through its modes icons, black, image and icons. ... Digital Cameras

Canon 350d just bought 2nd hand canon 350d. should the lcd screen be showing the subject of photograph while focusing. as it is i only see image during 2second display after photo has been taken. i need to know and if so,how to set it right. Thanks Alan C

No, the so called 'live view' ( seeing pictures in real time on your LCD monitor ) is available only on the latest models that are coming out now ( Canon D40 and Nikon D3 and D300 have this feature ). ... Canon Rebel XT / EOS 350D Digital Camera

A85 camera LCD shows up with pink and black lines every time a picture is taken. LCD screen displays the camera icons on LCD screen but will not take anymore photo's. Lens used to view picture status prior to photo shot but now, it consistently shows up in black. When a picture is shot, the screen then turns pink and black on the LCD screen.

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. ... Canon PowerShot A85 Digital Camera

Can you please, please help, my beloved Canon Power Shot A75 (purchased in 2005 in France) has developed a LCD display problem when turned on. A few months ago the screen distorted with lines and now the screen is totally black. I am asking you for help as I had no luck to find anyone here in France to give me any help or support. Thank you. Looking forward hearing from you. Best wishes

This is most likely a CCD problem that is being repaired free by Canon. I don't know where the French repair center is but you might find it on the internet. For more details about the free repair, go here: ... Canon Digital Cameras

Canon EOS 1100D half of the lcd display and photos are black

... Canon EOS 1100D / Rebel T3 Digital Camera

LCD Display I haven't used my canon for a while - I've just turned it on and though the LCD display works to show pictures I've taken and the settings screen - I can't see anything in it when I take a picture (it's just black) when I press the Disp button it just switches from a black screen to the settings screen - please tell me what I can do so that I can see the image in the LCD before I take the picure. Thanks for your help

As far as I am aware, the 400D doesn't have a live preview mode.What you are describing is perfectly normal and is how 99% of digital SLR cameras behave.Are you sure it used to do this?Matt ... Canon EOS 400D / Rebel XTi Digital Camera

No Display The LCD does not display anything when the mode is set to take a photo and when a photo is taken it is a black screen, however the camera setting displays do appear on the LCD.

This is a CCD problem Depending on the age of the camera it may be repaired free- but if preices are mentioned - just go for a new camera ... Canon PowerShot A60 Digital Camera

Black LCD Canon A60 Cute camera, many nice features. Installed a Lexar 256mb CF. Worked well until just past the warranty period. Now nada, just a black screen, or scrambled LCD. If you squeeze the shutter, wysiwyg--a black photo. Contacted Canon and essentially they offered me an "upgrade" to their A70 for $150 plus $10 for shipping. And a 3 month warranty. Any advice or do I have an expensive paperweight?

I have heard that there is a CCD sensor issue with a few selected models. Somtimes if you bang on the case this will help a connection problem in the camera and you will get some change in the image on the display. If this does happen then that is th ... Canon PowerShot A60 Digital Camera

Black LCD display on Canon Powershot S60

This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot S60 Digital Camera

Lcd display not working on nikon d40. When we turn on the camera, and take off the lens cap, the lcd display is black. we can use the viewfinder to take a photo. We can view the image after taking the photo, but can not see the image prior to taking the picture.

The D40 works the same way SLRs have worked for the past half century. Only recently have dSLRs acquired a "Live-View" capability, where you see the image on the LCD monitor instead of through the viewfinder.I realize this probably wasn't ... Nikon D40x Digital Camera

Lcd panel I've just bought a new canon eos 350d and the lcd panel will not show the image of what I am taking a picture of. I can take a picture, and display it back on the lcd panel but just not display what is in the viewfinder when I want to take a photo. Have I got a setting wrong somewhere or is the camera faulty? thank you!

SLR's don't show what your seeing through the view finder on the LCD. That is a function on point and shoot cameras, not on SLR's. ... Canon EOS 30D Body Only Digital Camera

Can't get a picture on the screen - just shows black. When we turn the camera on the LCD screen displays the function choices and menu options, but will not display any image. If we take a picture using the view finder and then check for the image, nothing is displayed. We just checked the memory card, and it doesn't even take a photo. All we got was black. Any suggestions?

Check the SD card, they have sliders on them which lets you "lock" the card so nothing can be put on or taken off of it. Make sure that is off. Then go through the menu on the camera and try to format the card again. If the card is bad it should give ... Canon Powershot A1000IS 10MP Digital Camera with 4x Optical Image Stabilized Zoom

Canon SD 1100 IS Display screen is black except for icons. the issue is not the display black to save power. All pictures now taken are black as if the shutter is closed. I can still view previously taken photos before the screen/shutter issue happened.

The CCD is dead or the lens shutter doesn't open. You have to contact your local Canon service center.Hope this helps!Tom ... Canon PowerShot SD1100 IS Digital Camera

My canon powershot a1000 when turned on, displays a black screen with icons. its not like this before. normaly when i turn it on, i can see the view from the lcd but now no more. but everything seems to work as normal except for the black screen after turning it on. my trick is to press DISP in order for me to see the lcd display.pls help. thanks

... Canon Powershot A1000IS Digital Camera

Hi Suddenly my g11 is blind lcd is working but camera doesn't see anything lcd is black in all modes like electronic courtain does not open exposing sensor all other functions are seems to be working camera is actuallytaking black photos now those taken previously can be still displayed from memory card

There is two ways to view your "taking picture" with the LCD and with the viewfinder, you can shut the LCD off to save battery power and use the viewfinder and that is what I think has happened. a touch of the DISP button and it will switch from the ... Canon PowerShot G11 Digital Camera

Our Canon Powershot A80 turns on, but no display appears on the LCD monitor when in shooting mode. Camera acts like it is taking a picture,flash occurs, but you then cannot display the image on the LCD monitor.(all black) When trying to download the image from the CF card, it is just a samll dot, no image is there. We have had camera for several years, no longer under warranty.

Seems your Canon A80 camera got known problem of bad ccd imager IC that needs to be replaced.Canon will replace ccd imager free of cost, click ... Canon PowerShot A80 Digital Camera

Nchatta Hello, My Canon s45 was working perfectly until it was dropped from a very very small heigh in a soft leather case with protection. The camera works in the sense that it can read and display the images from the SD card perfectly, the lense extends but you cannot see anything on the LCD when wanting to take a picture bar a white box in the middle that usually turns green once focussed (but now doesn't.) The screen is just black. The shutter clicks, takes the picture, but just a black LCD

It seems like if u see icons on lcd then sorry to tell u i think ur CCD is gone it seems like , but to make it sure first get the lens checked but iam pretty sure abt the CCD bcoz it is risky in impacts and jerks ... Canon PowerShot S45 Digital Camera

I have canon power shot A 720 IS. Its been fine for 2 years. suddenly it stopped displaying in the LCD screen. But i can take pictures by looking through the view finder. Also, the LCD display works when in the video mode and photo stitch mode. please let me know the solution. Thanks.

Maybe the display was turned OFF. Check it and turn it ON. If still in problems, look for a specialized service to check you camera. ... Canon Digital Cameras

Blank LCD screen on shooting mode, but does show settings. Will not take pictures. Replaying mode works, shows pictures taken before screen went blank. New batteries. What is going on??? Is it fixable? I bought the Canon PowerShot A570 IS. I don't know if it is me or the camera but my LCD screen doesn't stay on. I can take a phote, the photo will then display on the LCD for 2 seconds BUT then the LCD goes blank, all i can see are the menu options. If I take a pic while LCD is blank my pic's

The Display button manually turns the LCD display on or off to save batteries. If you accidentally had turned the LCD off, It should only take one press of the button to turn it back on and leave it that way. As such, it's not you but the camera. ... Canon PowerShot A570 IS Digital Camera

Canon A560 camera problem - the images are overexposed. I checked the exposure setting, AWB, and all other settings and they are all normal. There is an exposure setting where I can set to + or - 2, but setting it to -2 does not help much. Outdoor photos are almost completely white. There is some detail in black objects. Indoor photos are overexposed. Flash pictures seem OK. The picture on the display is OK. I compared some macro photos taken a few weeks ago with macro photos now. The good photo

... Canon PowerShot A560 Digital Camera

Our canon rebel T3 LCD will not display the menu or field of view. We can see the field of view thriugh the viewfinder only. The LCD does work in the video mode, so it is not that the LCD is broken. The LCD is totally black in all picture taking modes. Thanks.

... Canon EOS 1100D / Rebel T3 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3322 seconds