Having problems with your Canon PowerShot SD850 IS Digital Camera ?

Canon SD850 power button broken, is there a

\015 Canon SD850 IS power button broken, is there a replacement and how to fix it. I have the same problem. The power button on my Canon Powershot SD 850 IS is broken. I can still get it to go on and off sometimes if I use something small to press the button, but I would like to fix it. Any suggestions?\015

Answers :

Repair Help & Product Troubleshooting for Canon PowerShot SD850 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Canon SD850 power button broken, is there a


... Canon PowerShot SD850 IS Digital Camera

Canon a80 dear hi,      hope u all r well. please help me to solve the problem for the canon powershot a80 which suddenly got dead.when i press the power switch it takes around 150 ma of current till i keep power button pressed.no light comes on.After releasing thepower button the current goes down to zero.      please help me.i m an electronic technician.this is my personal camera.thanks my email  [email protected]


Here are some simple things to try first for a camera that won't power on:\015\012http://camerarepair.blogspot.com/200 ... Canon PowerShot A80 Digital Camera

Canon SD4000 camera, when hitting the power button, the screen remains black screen, the green light blinks twice, lens zooms out, shutter opens. Screen remains black, and I do not seem to have any control at all; pressing the zoom button doesn't move lens, no notable reaction to anything. Hit the power button again, the lens zooms back into it's original position, shutter closes (occasionally does not shut completely), green light blinks twice, screen remains black. Tried turning on w/o SD card


... Canon SD4000 IS IXUS 300 HS Digital Camera

Is there way to check the powering up circuit(s) for Canon SD550? I opened the camera to replace the broken LCD and now it is not powering up. Wondering if the circuit is broken and if it can be identified and fixed. If so how?


HeyMost likely something is not connected properly on the canon, maybe a cable is lose or similar.Of course you can use a multimeter and measure the voltage inside the camera, but I think that would be very diffic ... Digital Cameras

My Canon PowerShot SD780 IS will not turn on. I purchased another battery to make sure that wasn't the problem and it isn't. I have tried pressing the power button and OK button simultaneously for a few seconds and that hasn't helped. The power light doesn't turn on, the lens doesn't open, it doesn't even beep. I desperately need help and would really appreciate any advice. Thanks, Vanessa A.


... Canon PowerShot SD780 IS / IXUS 100 IS Digital Camera

Canon g9 won't power up when the power button is pushed. Canon g7 had the same thing happen


... Canon PowerShot G9 Digital Camera

My Canon PowerShot SX10 IS is 2 years old. Now, when I use the zoom, it beeps continuously and turns off, but the power button glows as the camera is on. Then I need to switch off the power button and the restart to work on it. This happens, when I zoom faster.


I had a similar problem. I took it to a camera repair shop and got an estimate of $45 for repair. The shop repaired the camera for the estimated price. I was told that the camera had needed cleaning. I am satisfied with the repair and the price.I ... Canon PowerShot SX10 IS Digital Camera

I have a flip Ultra HD 2nd gen model: u2120B. I bought it off of eBay, broken. The buttons don't work. The camera is seen by the computer when plugged in. I can format the camera HD and reinstall the software. No change. When I turn the camera on, it goes directly into setup, prompting me to select a language (English). I push all of the buttons and nothing happens. The only button that does anything is the power button. I have taken other flip cameras apart and replaced the LCD, lens, res


... Digital Cameras

A Canon A570IS will power on and and everything works with external power (3.5-3.7V, 2A. 3rd party) but is dead with batteries (two fresh alkaline or NIMH AAs). I have used parts (from junk 570s) and have replaced the main board, button board, flexicable that includes on/off switch & shutter, leds, etc.. Again, lens, flash, storage, LCD, etc. work with external power, but not with batteries. I am at a loss. Any suggestions?


Since the external power works, we need to know, first off, if the battery terminals have continuity with the external power supply contacts. That will tell us an important part of this puzzle. The one hard thing about this problem, is that what ... Canon PowerShot A570 IS Digital Camera

Hi, I have a Canon Power Shot G10, Serial Number 7021002939. I'm making the first ever attempt to download photos from the camera to my MacBook Pro. I wish to use iPhoto to download to the computer. I have plugged the USB cable into the computer and into the digital terminal of the camera. I have pressed the Playback button. FYI, I have also downloaded the Canon Digital Camera Solution Disk. The Canon program will not download the photos, either. Nothing happens. I have tried t


Do what the pros do....use a card reader instead of the camera. When you plug it into the USB port, an icon will appear called "NO NAME". Double-click on it and the pics will open in "preview". From there, you can import them to a folder you create o ... Canon PowerShot G10 Digital Camera

Hi, I have a Canon Power Shot G10, Serial Number 7021002939. I'm making the first ever attempt to download photos from the camera to my MacBook Pro. I wish to use iPhoto to download to the computer. I have plugged the USB cable into the computer and into the digital terminal of the camera. I have pressed the Playback button. FYI, I have also downloaded the Canon Digital Camera Solution Disk. The Canon program will not download the photos, either. Nothing happens. I have trie


1. With the camera on and in playback mode, plug the cord from the camera into the Macbook. It should appear on the desktop as a drive, probably called "no name". If it doesn't, don't worry...the next solution always works and it's the one the pros u ... Canon PowerShot G10 Digital Camera

Canon A530 camera : button on top has broken off, the " take the picture" button. The button is lost also, so a new one is needed, any ideas? I live in Prescott, AZ, 86301 email me at [email protected] Thank you for your help... craig


... Digital Cameras

Broken plastic top by power button


Remove two screws and then remove C-CASE-ASSY ... Casio EXILIM Card EX-S770 Digital Camera

Canon Power Shot SD300 Broken Screen


Pretty easy to replace the screen, i suggest buy SD300 from ebay that has lens problem, but it is known for sure that screen is working, you might find one for $20-30, also look for SD200 you might find it cheaper and it uses the same screen as your ... Canon PowerShot SD300 / IXUS 40 Digital Camera

Canon sd630 I have the SD630 and it just stopped in th emiddle of taking pictures and the lens is out. No signs of power. The batter is fully charged and I did check the door switch by manually depressing it while pressing power button -no success. What would it cost to get this fixed?


HiSounds like it would need the fuse replaced, about $35 if we can do it.. some of them are very hard to get at or solder. If that doesnt work it would need a new mainboard, $85 if I can get one used.sales AT darntoothysam DOT ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

I have a canon power shot A540 and can not get the lens to close. When I hit the power on-off button- it says Lens error-restart camera. What can I do to solve this problem. Thank you. Sue


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A540 Digital Camera

I got ixus 65 canon camera got problem with power, I just press hard on bottom and power button and can see light temporary, could anyone show me how to disassemble and check this camera. Tks a lot!!!


Hi,For this, you need to have all the Schematics as well as the Locations and Part Numbers. The only option would be to go for Service Manual. Usually Service Manual's for Camera's are not easily available, but i am glad i Found one for y ... Digital Cameras

Dropped camera i dropped my camera and when i turn it on the screen looks cracked and it white! it looks broken on the inside. I have a polaroid i830. One day i dropped it on the floor, and it doesn't work now. If i push the power button on, the power light comes on, but the screen and everything stays off. I also can't get the light to turn off unless I take out the batteries. The screen appears to have a crack. Is there any way to fix it before spending to get a new one ??


My camera fell out of my pocket book and busted the door. I glued it. that worked for about 6 months. I need the door for it and it will be as good as new. ... Polaroid i832 Digital Camera

Hello I have a canon IXUS 960 IS. Yesterday when I was using the camera it only closed half way when powering the camera off. Now the camera doesn't open fully and when pusing the "play" button the power goes on and off straight away. At first I thought this was a problem with the battery so I have fully charged the battery and the problem is still the same. What do I need to do to correct the problem? Thanks


If the outside of the lense get dirty, those small particles may prevent the lense from opening and closing 100% as nomal times. I had the same problem with my Sony. Here is what I did.\015\012\015\0121- I cleaned the outside(sides not ... Canon IXUS 960 IS Digital Camera

CRACKED SCREEN dropped my camera and when i turn it on the screen looks cracked and it white! it looks broken on the inside. I have a polaroid i830. One day i dropped it on the floor, and it doesn't work now. If i push the power button on, the power light comes on, but the screen and everything stays off. I also can't get the light to turn off unless I take out the batteries. The screen appears to have a crack. Is there any way to fix it before spending to get a new one ??


You cannot repair the broken LCD screen; the white you are seeing is the backlight for it.\015\012LCDs have extremely thin gold deposits along one edge that is contacted by a silicone rubber strip that has fine wires molded into it vertically and one ... Polaroid i832 Digital Camera

Camera: Canon Power Shot A85 Problem: Menu Button, Function Button and Omni Selector are not functionning. Everything else is fine.


Check the battery life ,remove the battery for some then put it back check the battery life and see if u can change attime this affects the menu keys,if the problem contines let me knw ... Digital Cameras

Describe hi, i have a canon powershot a520 that was left in someone's purse when she gave it back to me the lens is now sticking half way out and when i push the power button it blinks on for a split second immediately shuts off. is there a simple fix for this or is it a major problem Canon PowerShot A520 Digital Camera Problem


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot A520 Digital Camera

My canon powershot sd750 digital elph will not power up when i press the power on button. please help.


... Digital Cameras

My canon digital IXUS 60 is not working. It was going fine and then I turned it around to take a self portrait and clicked the button when i lokked back at the screen it was blank and i haven't been able to turn it on again using the on/off button, how do i start it again. it is like it has shut itself down and frozen.. help, its my dads and i dont want it to be broken....


Sounds like you accidentally pressed the display button which turns your LCD display on and off (to save batteries). Turn on your camera, and press the DISP button once in the lower left corner. ... Canon Digital Cameras

I have a canon Power Shot S50. The mechanical slider that covers the lens is loose. When I open it, it doesn't power up the camera. I suspect there is a switch underneath the cover is broken.


The open door button on a circuit board is usually micro. A loose cover will likely not make contact with this small switch. Take the cover off and tighten the screws on the inside. Try to locate the switch to inspect if it has been wore off, brok ... Canon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1948 seconds