Having problems with your Canon PowerShot SD960 IS Digital Camera ?

I dropped my camera and it now says lens error restart camera when I try to turn it on, how do I restart my camera? I have a canon powershot SD960 IS.


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Canon PowerShot SD960 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I dropped my camera and it now says lens error restart camera when I try to turn it on, how do I restart my camera? I have a canon powershot SD960 IS.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SD960 IS Digital Camera

My Canon PowerShot SD850 IS has a lens that is stuck in the extended position. I get a screen that says lens error, restart camera, but when I try to connect to the software, I get a screen on the computer telling me the computer cannot detect the camera. Battery is freshly charged, and I get the little yellow bird picture on the camera when I turn it on. It beeps about 4 times, and then turns off. Is there a safe way to get the lens to retract?


Don't play around with that lens, you can do more damage to the camera and focus with some of the stuff people tell you to try. Your camera just needs to be serviced and you'll be working great again. The shop that specializes in service for the powe ... Canon PowerShot SD850 IS Digital Camera

I put my camera in my backpack and the lens got stuck, it won't come out at all. When I turn the camera on it says "Lens error, restart camera". I've tried everything this site said to try but nothing has worked. My camera is a Canon Powershot A560. Does anyone know how I can fix it? Please Help!


Try these procedures. ... Canon PowerShot A560 Digital Camera

Hi, i have canon powershot a590 is ,and when i try to turn it on it says: " Lens error. Restart the camera", but i can't restart if i can't turn it on, maybe it happened because the camera run out of battery while it was on, please if you guys can help me out i would really appreciate it. Thank you very much.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot A590 IS Digital Camera

Lens is open and won't retreat back inside. I turn the power on and makes a funny clicking noise like its trying to retract the lens back in. After three seconds of this it says "lens error, restart camera". Its a canon powershot SD790 IS digital elph with image stabilizer. Canon PC1261...don't know if that helps.


I've had similar problems with various versions of this camera. Here's the fix, if all else fails. These are step-by-step instructions to take apart and fix the camera's lens error. http://johnsmouth.wordpress.com/2010/12/01/lens-error/ ... Canon PowerShot SD790 IS/ IXUS 90 IS Digital Camera

I have only had my Canon PowerShot SD1400 IS Digital camera since December and all of a sudden whenever I try to turn it on, the lens does not open or move out and I receive an error message saying "Lens Error, Will shut down automatically, Restart camera." I have never dropped this camera and am concerned that it is not fixable. Please help!


It always comes because there is something loose inside the lens, such as a screw.\015\012These articles maybe helpful for you: ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera

Hello, I have a Canon powershot SX100 IS, and everytime i turn it on it beeps and says on the screen "lens error, restart camera". I have tried tapping it, shaking it a bit. turning on and off. Put in new batteries, taking memory card in and out. Turning it on at different angles. Connecting to the computer. But nothing is working, it wont even let me look at the photos when i press the play button, and that doesnt even require opening the lens! please help! thankyou.


Try these procedures. ... Canon PowerShot SX100 IS Digital Camera

Canon powershot sd750-When I try to turn the camera on it says lens error restart camera..any ideas on how to fix w/o sending away?


See Lens Error ... Digital Cameras

The lens will not retract. A message says "lens error, restart camera," but the camera will not restart. The camera is a Canon PowerShot S3 IS. I can hear a "whirring" or motor noise when I try to start it, but the lens will not retract and it will not take photos or allow you to review photos. Batteries are just fine. I imagine it's the gears, but I wish I could have it repaired for not a lot of money.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. O ... Canon PowerShot S2 IS Digital Camera

Lens problem The lens on my cannon powershot A1000 will not open. When I try to turn on the camera it makes a buzzing sound like it's trying to open and then a message comes on the screen saying lens error restart camera. This camera is pretty new so I'm not sure why the sudden problem.


You should have dropped your cam down to the floor or you should have forcibly tried to put your lens inside when the servomotor lens tried to bring the lens out..take your camera to the nearest service centre..you should not try to open the cam sinc ... Canon Powershot A1000IS 10MP Digital Camera with 4x Optical Image Stabilized Zoom

Hi! Im Michelle from Dubai UAE, i bought my canon elph series camera last july 09 only and just yesterday after turning on the device the lens was stock up and not turning to its place anymore,.i tried to turn it off and on again but the camera is only blinking and there's a message on the screen says "Lens error, restart camera" ...I would realy appreciate any positive feedback,..Thank you very much for your kind attention Sincerely, Michelle Email:[email protected]


Hello.....\015\012sir it might be a lense problem i guess............the spring with which lense moves may be not proper............. slidin of lense is not aceessble by ur cam...........so better if show it to ur provider.......they replace it ... Canon Elph Jr. APS Point and Shoot Camera

Canon powershot SD780 is camera. Camera shows the canon screen then turns black and beeps three times then says "lens error restart camera". I don't know how to restart...i need to use it I'm on a trip What do I do?


There's really no way to restart it if there's a physical problem with the lens. Try to power it on again but if that doesn't reset it, the camera needs to be serviced. A great site for help with these is: camerasandparts.com They just specialize in ... Canon PowerShot SD780 IS / IXUS 100 IS Digital Camera

I have a Cannon Powershot SD600, just got it recently and it worked great, then all of a sudden I noticed the cover lens's that slide over to protect the lens when you shut it off were messed up. Onle 1 was showing. I tried turning it on, and all it says now is, "Lens error, please restart camera." I tried the Hold Menu down for 5 seconds, but that did nothing since it doesn't even turn on.


The Canon series are fine camera's, but they seem to suffer from lens errors (check how many people suffered from this by googling lens error canon). The problem seems to come from sand/dust entering the body and jamming the lens gear. A h ... Canon PowerShot SD600 Digital Camera

I have a canon powershot sd750 and when i turn my camera on it says lens error, restart camera


Hi Shawn,Check the link below and you will be able to fix the issue by doing the troubleshooting.Click here - > ... Canon PowerShot SD700 IS Digital ELPH / IXUS 800 Digital Camera

Powershot A560 I have a Canon Powershot A560 but now when I turn it on it beeps 6 times and the screen shows "canon" in blue but then goes black and says at the bottom "lens error, restart camera". Also, then lens never fully goes in or out. Help.


The following blog outlines some repair options for a lens error. They won't work for all cases, but they're worth a try if the camera's no longer under warranty:\015\012\015\012 ... Canon PowerShot A560 Digital Camera

Just purchased an powershot SX1 IS. I took one photo, zoomed in on it to see how clear the zoom was once taken a photo. THen it switched itself of with the lens still out. Now when turning it on it has a black screen and say lens error...restart camera. I have tried holding func. when turning on the camera and the time comes up on the screen. But as soon as I let go of func I get the error msg.


Hello if you just purchased this unit Then i advise you to take it back, this sounds like a system control issue or main board problem. Holding the function key while turning is factory reset, if this is not working right them the camera has a bad sy ... Canon PowerShot SX1 IS Digital Camera

My daughters Canon PowerShot SD750 has the lens extended and stuck, turning on the camera gives a lens error message and atates to restart camera. have tried this numerous times and no help. Camera was never dropped, was just using one day, took some pictures, then the following picture I was taking lens stuck open.


Hi. This is an unfortunate mechanism failure. You can try to reset the micro board by removing the batteries for 3 mins. If that reset doesn't work, the actual lens sensor will continue ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Lens error I have canon A570 len is out. turn on camera says lens error restart camera. tried blowing with air taping on usb port took batteries out lens looks centered


Change your battteries installl new one ... Canon IXUS V2 Digital Camera

Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks. Turn on the camera, camera shows a canon logo, then before turns off it said lens error, restart camera


\015\012\015\012I have a solution posted in doc "nikon s5 s6 lens cover error repair.doc"  uploaded on site http://www.esnips.com/web/papputatiyasStuff&n ... Digital Cameras

Lens won't retract and when I try to turn the camera on, there is a clicking noise and then it says lens error, please restart camera. I assume something is jamming it, what do I do? My camera is a Powershot SD750


You are spot on. You've just diagnosed your own problem. Now, what to do about it? Number one, DO NOT do as some "person" on certain forums suggests Bash it on a hard surface.\015\012\015\012Either you or someone else has given the lens a ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Camera drop! Ok! So i dropped my camera (canon powershot SD850) on my bathroom floor! its not that broken except when i turn it on it says lens error restart camera? how do i restart it?


You need to take it to a camera shop for servicing, this is not something you're going to be able to solve at home ... Canon PowerShot SD850 IS Digital Camera

Turn camera on (Canon Powershot A480 digital), logo comes up, then it says LENS ERROR RESTART CAMERA. However, when restarting camera, same thing happens


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A480 Digital Camera

I have a Canon Powershot S3IS and I recently purchased a 2x telephoto lens. When I use the telephoto lens and try to extend the distance as far as it will go, the camera shuts off and says lens error please restart camera. Do you have any idea why it is doing this?


Did you tell the camera that you are using an external/additional lens? You have to specify it somewhere in the menu, the camera gives you some options (the lens model numbers) and you need to match it with your lens' model number. ... Canon PowerShot S3 IS Digital Camera

I have a Canon Powershot A460 and when i turn it on there is a message saying lens error, restart camera..The lens will not come out and i never dropped this camera either. I changed the batteries but same thing. Can you help?


Hello,\015\012If this camera is under warranty you should carry it to the Canon Care Center they will replace the Zoom lens unit of your camera, or you need to get it replaced on payable basis as the lens has some ... Canon Digital Cameras

My lens will not open on my Canon PowerShot A720 Camera will not open. It say, "lens errror, restart your camera." How do I do this? I tried to change the batteries. This did not work.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot A75 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7478 seconds