Having problems with your Canon PowerShot SX100 IS Digital Camera ?
I have to set the date each time I turn on my Nikon S9 camera even when the battery is fully charged
I have the Same Problem .. every time i turn ON the Camera .. it ask's me for the Date & Time .. that accoreded after my camera had a bad fall on the ground ?_?
Repair Help & Product Troubleshooting for Canon PowerShot SX100 IS Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
I have to set the date each time I turn on my Nikon S9 camera even when the battery is fully charged I have the Same Problem .. every time i turn ON the Camera .. it ask's me for the Date & Time .. that accoreded after my camera had a bad fall on the ground ?_?
... Canon PowerShot SX100 IS Digital Camera
My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?
\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera
Every time I turn my camera on it asks me to set the time zone, area I am in, date, etc...again. It's causing problems when I download pictures. They're all out of order. Even when I reset the date, time, etc. it always asks me to reset it every single time I turn on my camera.
... Canon PowerShot S400 / IXUS 400 Digital Camera
Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.
The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera
When i turn on the camera, it always asks me to set time and date. If i click on yes, then i have to enter all the details as to the date, time, place. Also, the MP size defaults to 14MP instead of the previous setting, for e.g., if i had previously set it to 5MP, it would go back to 14MP after I turn the camera off and on.
Well, I have the same problem. Just introduce once the date and time. Turn off the camera. then turn the camera on using the button for presentation of pics (right arrow). You will see the last picture taken. Press again and you will be in shoot mode ... Nikon COOLPIX S710 Digital Camera
The date on my camera is reseting every time i turn it off and then back on again so it is asking me to enter the date every time I turn the camera on.
Next time you finish entering the information, press the set/ok (or whatever) button twice. ... Canon PowerShot SX110 IS Digital Camera
1st problem is that my videos dont have sound how do i turn or the sound and will i be able to hear the sound on the videos i already recorded, 2nd is every time i turn my camera on it keep asking for the time and date how can i get it to store the date for good
U nid 2 RETURN UR CAM TO D STORE,wen u bought that.......... ... Polaroid PhotoMax PDC 4055 Digital Camera
Help 1st problem is that my videos dont have sound how do i turn or the sound and will i be able to hear the sound on the videos i already recorded, 2nd is every time i turn my camera on it keep asking for the time and date how can i get it to store the date for good
Hey hun ok our camera type dosent have a speaker when you downloa d the movies they will have sound so dont fret ... Polaroid PhotoMax PDC 4055 Digital Camera
I have casio exilim ex-z50. It worked fine the last time i used it. I went to use it yesterday and when i powered it on it asked for a date & time reset. after i reset the time it turned off and would not turn back on. After charging it it would turn on, but with no display. The display is completely black and when i take a picture and retrieve it from the camera the picture is also completely black. any suggestions. thanks
Your problem may be due to weak/worn out batteries or corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything el ... Casio Exilim EX-Z50 Digital Camera
Hello, When I just bought this camera several years ago, I entered the time and date settings and after I've done this it never asked for time/date settings again. But now every time I turn on the power button, I have to set the time an date and press "SET" for OK. I read somewhere on the internet that others have encountered this problem as well. Can this be solved??? Thanks in advance, **** Muilwijk
You may need to take it in to the camera place to get the internal batery for the clock replaced also you may need to up load the driver program for the camera ... Canon PowerShot A520 Digital Camera
My Sony 7.2 Cybershot camera recently ran out of battery, so I charged it. Once it was done charging, I put the battery back in. The screen showed up asking me to insert the current date and time, so I did so. Next, the zoom lense went out and in, out and in, and out and in while the screen said "Access". Next, it told me to turn the camera off and on again. Nothing happens when I do so, and I've done it about 10 times to no avail. Is this a fixable problem?
... Sony Cybershot DSC-T200 Digital Camera
When I turn on my camera it asks to set the date and time and then just says to PLEASE TURN CAMERA OFF AND THEN ON AGAIN. That's it. I cannot currently take pictures or retrieve any.
HelloThe problem is that the lens has become stuck in the barrel\012 after dropping it. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\01 ... Panasonic Lumix DMC-FS3 Digital Camera
Every time I turn on my Casio EX-Z75 camera it asks for the date and time and pressing the set button twice did not work nor resetting it to defaults or formatting the camera. Is there a way to hard reset the entire device to factory settings?
Here's the toll-free tech support number at Casio...they should be able to give you an answer:\0121-800-435-7732 ... Casio Exilim EXZ75 Digital Camera
Ixus 80 IS - Won't save date and time Everytime I turn my camera on it asks me to set the date and time, the manual says it has an inbuilt battery (I don't think it is changeable), is there anything I can do ?
After setting the date and time, press the set/ok/menu (whichever one you press at the end) button twice. ... Canon IXUS 80 IS Digital Camera
Camera Canon A710 IS started to ask set time date when turned on
When the camera is left without power for an extended period of time, the time and date settings are gone. You need to reset them and when you're finished, click the set/ok button twice. ... Canon PowerShot A710 IS Digital Camera
When i try to turn my camera on, it doesn't work, and when it turns on by itself, it doesn't shut off when i want it too. and when it does turn on, it asks me to put the time, date and year in all over again. please help!!
Hi!Try resetting the camera, press Menu-Setup-Menu-C. Also ... Nikon Coolpix S3000 Digital Camera
I received a canon powershot as a gift last year and am just now really starting to use it. The pictures seem fine, but the it seems like I am frequently requested to put in the date and time (i.e. about every 2nd or 3rd time I turn the camera on). Is there somethign I can do to get the camera to retain the date and time? It is sort of annoying that I can't turn it on and take a picture quickly since it won't let me take one until I have entered the date and time. Also, I don't think it is stamp
There is a button battery in your camera (CR1220) that remembers the date and other settings when you remove the main batteries. It probably needs to be replaced. It's in a slide-out holder next to the AA batteries (see page 184 in the manual). ... Canon PowerShot A590 IS Digital Camera
Every time i turn my camera on it asks for the date and time to be entered. Is there an internal battery that is dead?
Yes, the clock battery has died. This is very inexpensive and easily replaceable. Lift up the rubber flap on the left side of your camera. Pry open the little sliding door just under the flap. Pay attention to the little button battery inside and h ... Canon PowerShot A520 Digital Camera
My HP photosmart R967 worked great until it said it was out of battery and shutting down. Now I can't get it to charge, and it won't turn on. Strange thing, when it's on its' little dock charger, it turns on to a screen asking you to set the date and time, then won't set it. My husband thinks it needs a new battery ---- help! I need my camera!
... Digital Cameras
I have a new PowerShot A580 and am having problems: 1. Every time I turn on my camera it asks for me to set the date and time. I've done it and saved it, but the same message keeps recurring. What can I do?
Replace this small battery near memory card:P it is hidden under a piece of plastic. it works like a battery on a mainboard - keeps clock alive. ... Digital Cameras
Having problems with the settings not being save and is being ask the same questions about language,world location,date and time every time i turn on my camera
... Casio Exilim EX-S500 Digital Camera
Everytime I turn the camera on, it's asks to set the time/date. No matter how many times I HAVE set it, it always comes on again. So to use the camera I have to always go thru the "do you want to set the date stuff" first.
---- This is a problem many Coolpix S710 owners have had and many have had a defective internal battery (it keeps the time and date). To see if yours is defective, fully charge the main battery, put it in the camera and let it set with the power butt ... Nikon COOLPIX S710 Digital Camera
Every time I turn my camera off I have to reset the time and date when I turn it back on. When I first got this camera I could set the time and date and it would stay set until I changed the batteries. what is the problem and how do I fix it?
The small internal battery has died.It will need to be replaced at a camera repair center. ... Polaroid A500 Digital Camera
Power Shot G2 camera is at date screen when you turn it on. I changed date battery and it will not let me change the date. Camera has only be used 3 times. The camera powers on and lens moves but it will not leave the date screen nor do any of the buttons work to advance the time and date.
I had a similar problem. I solved it by taking the rear cover off and reseating a ribbon cable that connects the switches to the main circuit board. This connector is hidden under a large plug in connector - also a large copper/plastic ground plane ... Canon PowerShot G2 Digital Camera
Need to reset time and date every time I turn on camera.
You need to insert a new date/time battery. It's one of those flat disc batts that fits in a holder on the side of your camera. Look for a battery compartment cover on the right side of your camera with the lens facing you... it should come open with ... Canon PowerShot SX100 IS Digital Camera