Having problems with your Canon PowerShot SX100 IS Digital Camera ?

When I turn on camera , it is not opening lens errow message on

\015 When I turn on camera, it is not opening, the screen showing " lens errow" and start camera again mesage poped up do you have any idea how to fix it?\015

Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Canon PowerShot SX100 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When I turn on camera , it is not opening lens errow message on


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SX100 IS Digital Camera

I have a small Panasonic Lumix DMC-TZ5 camera. After fully charging the battery I am all of then sudden getting this error message :"please turn camera off and then on again." When the camer is OFF the lens is extended and open. When I move the camera to ON the lens moves in to the closed position closes, then reopens, extends, tries to focus, is unable to and the error message appears "Please turn camera off and then on again" This cycle just repeats. The lens is able to extend it is not st


Hi,Checkout this tip about digital camera error messagesLens Errorfix for Digital Cameraheatman101 ... Panasonic Lumix DMC-FZ7 Digital Camera

When switched on the camera tries to open the lens. It is clearly being obstructed in some way, and after three attempts closes down with the message "Please turn camera off and on again". If tapped gently sometimes the lens will open, and if the lens is caught and encouraged to stay out then ooccasionally the camera opens as normal. If the lens does stay open the camera appears to function as normal.


Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart ... Panasonic Lumix DMC-FS5 Digital Camera

The lens on my sd600 won't open when I turn the camera to picture taking position. Screen goes black and message says ''lens error, restart camera''. I have to go back to view mode and then turn camera off and on again in order for partially opened lens to retract fully and close.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Canon PowerShot SD600 Digital Camera

Camera was on, working fine. When powering off, telescoping lens did not retract so lens remained extended just a bit with lens cover open. Waited a few minutes, turned it back on and I get the "access" display message then the beeps and (turn power off and back on) message. While off, I have removed the battery, replacing it with a fully charged spare and it still does this. The lens tries to telescope a little bit and retracts a touch, but I can't get the camera out of this mode. Can it be res


Your problem may be due to corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: remove the batteries and wip ... Sony Cyber-shot DSC-W55 Digital Camera

I dropped my camera. In the off position, the lens stays open and projected. Then turning to the on position the lens goes in, then out again. Then I receive the message "Please turn camera off and then on again." Before receiving this message, the screen looks normal, as if it will work, but then the message comes up. I took the battery out to try to reset, but no change. Any suggestioins?


HelloThank you for using FIXYA!!!This\012 is a suggestion. If you do not feel comfortable trying it, you will need to ... Panasonic Lumix DMC-FX8 Digital Camera

I have a Canon Power Shot SX120 IS camera. I turned it on and the lens open a portion of the way and I got an error message that say, "Lens Error Restart Camera". I put fresh batteries in it this morning and have only taken about 10 pic's. I turned the camera off and removed the batteries then replaced with new ones but I still get same message. Please advise if you can.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SX100 IS Digital Camera

Sony DSC-W70 digital camera - Lens attempts to open when pressing the power button but fails with a message to turn off and back on again. Bought a new battery and still does the same thing. Sometimes can get lens to open if tapping it in the palm of your hand while it is attempting to open. Once lens is open camera works normally.


That's a common problem on Cybershot cameras, happened to me twice, the solution is to get it to a camera shop for repair.\012\012The cause could be dirt or a malfunction on the lens extending mechanism. ... Sony Cyber-shot DSC-W70 Digital Camera

When I turn on the camera, it says "lens error, please restart". The lens doesn't open when you turn on the camera- it is like it is stuck shut. you can manually force it open, but it won't go automatically, and so it keeps on giving the error messages.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon PowerShot SD600 Digital Camera

Lens problem The lens on my cannon powershot A1000 will not open. When I try to turn on the camera it makes a buzzing sound like it's trying to open and then a message comes on the screen saying lens error restart camera. This camera is pretty new so I'm not sure why the sudden problem.


You should have dropped your cam down to the floor or you should have forcibly tried to put your lens inside when the servomotor lens tried to bring the lens out..take your camera to the nearest service centre..you should not try to open the cam sinc ... Canon Powershot A1000IS 10MP Digital Camera with 4x Optical Image Stabilized Zoom

WHEN I TURN ON MY COOL PIX S51 A LENS ERROR MESSAGE COMES ON THE SCREEN AND DOESNT ALLOW AN OTHER FUNCTION WITH THE CAMERA. THE LENS COVER IS STUCK OPEN WHEN THE MASSAGE IS DISPLAYED. IF I TURN THE CAMERA ON AND OFF A FEW TIMES THE COVER WILL CLOSE BUT THE ERROR MASSAGE REMAINS. IM NOT SURE WHY THIS HAPPENS AND IVE NEVER DROPPED MY CAMERA AND ITS ALWAYS STORED IN A FOAM CASE. I CANT AFFORD ANOTHER CAMERA RIGHT NOW, IS THERE ANY SOLUTION TO MY PROBLEM?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Nikon COOLPIX S51 Digital Camera

Lens error, restart cameraI turn on my camera, and I get an error message stating Lens error, restart camera, the lens is open and will not retract, I have removed the battery and tried to restart. It will not go beyond the lens error message


This is probably THE most common problem with digital cameras. Try these procedures. ... Canon PowerShot SD850 IS Digital Camera

Lens error, restart cameraI turn on my camera, and I get an error message stating Lens error, restart camera, the lens is open and will not retract, I have removed the battery and tried to restart. It will not go beyond the lens error message


Try these procedures. ... Canon PowerShot SD850 IS Digital Camera

Panasonic Lumix DMC-LZ2 Image 'melts' into streaky vertical lines when camera is turned on. This problem started occuring immediately after I found my kids deliberately turning the camera off while jamming the lens cover open, so they could get the 'turn camera off and then on again' error message (yes, I know - they've been banned from touching it again). I confiscated the camera, turned it off and it sat unused for about 3 days. When it was next turned on, the image on the LCD screen was


... Panasonic Lumix DMC-LZ2 Digital Camera

Lens error, restart camera When I turn on the camera, the lens does not open and I get the above message and the camera beeps about 5 times and turns off. Have swapped batteries, removed and reinstalled battery several times.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Canon PowerShot SX 200 IS Digital Camera

When turning on the camera a message comes up reading " Turn the power off and on again" and the lens seems to be struggling to open. When I turn off the camera & then back on the same message comes up everytime, please help !


Have you tryed brand new battertys ... Sony Cyber-shot DSC-W170 Digital Camera

My SONY Cypershot DSC-W55 lens will not open. The camera works, battery is charged, I can download the photos onto my computer but the lens won't open to take pictures. The camera beeps 3 times and says" turn the power on and off again." When I do that it gives me the same message and still doesn't open. Is there anyway I can clean it out myself?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Sony Cyber-shot DSC-W55 Digital Camera

I have a fujifilm finepix ax560. when i turn it on, i get a message to turn off the camera and turn it back on again. also the lens is stuck in the open position.


... Fuji Digital Cameras

I dropped my panasonic camera onto the zoom lens. the zoom will not close, the shutter stays open. When I turn on the camera it says "please turn off camera and turn on again." When I do this the same message comes on again. Is it worth geting fixed?


... Digital Cameras

My daughters Canon PowerShot SD750 has the lens extended and stuck, turning on the camera gives a lens error message and atates to restart camera. have tried this numerous times and no help. Camera was never dropped, was just using one day, took some pictures, then the following picture I was taking lens stuck open.


Hi. This is an unfortunate mechanism failure. You can try to reset the micro board by removing the batteries for 3 mins. If that reset doesn't work, the actual lens sensor will continue ... Canon PowerShot SD750 / IXUS 75 Digital Camera

When i try to turn my camera on it says "lens error, restart camera" but when i try to restart the camera it just repeats the error message. Ive plugged the camera into the computer, I've tried taking out the battery and memory card nothing changes. the lens will not extend or open"


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon PowerShot SD1100 IS Digital Camera

Am in Italy and my Lumix DMC ZS6 camera was dropped on a stone floor. The LCD is was cracked but the lens tracted and retracted and it took pictures. Two weeks later however, whenI wanted to use the camera, it did not turn on and the lens did not open. Is this simply a matter of replacing the LCD or could it be a bigger problem with the electronics. Would it be better just to buy another camera? Thanks!


Hello LauraWell, as you can imagine, dropping the camera will almost always have bad results. Besides your cracked LCD, i think you might have a circuit problem.In this case, it will be much cheaper to rather buy a new camera, ... Panasonic Lumix DMC-LZ2 Digital Camera

When I turn my DSC W230 Sony Camera on the lens opens and closes several times then finally closes and I get a message to turn it off and on again, but it just keeps doing the same thing. I have tired removing the battery for 20 minutes, reinitializing the camera and switching to different batteries that can power up my other camera.


\012Hi, \012\012Error: TURN THE POWER OFF AND ON AGAIN is displayed on the LCD screen when the Lens Mechanism is stuck or when affected by any malfunction. If turning the power on and off again does not resolv ... Sony W230 Digital Camera

I have only had my Canon PowerShot SD1400 IS Digital camera since December and all of a sudden whenever I try to turn it on, the lens does not open or move out and I receive an error message saying "Lens Error, Will shut down automatically, Restart camera." I have never dropped this camera and am concerned that it is not fixable. Please help!


It always comes because there is something loose inside the lens, such as a screw.\015\012These articles maybe helpful for you: ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera

Lens will not open when i turn on the camera and the message lens error restart camera appears.when i restart the camera the same happens.


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Canon PowerShot SD600 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6357 seconds