Having problems with your Canon PowerShot SX10 IS Digital Camera ?

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?


Answers :

\012\012try these:-\012\012
    \012
  • connect it to pc and on it
  • \012
  • vaccum the barrel of lens
  • \012
  • changing mem. card and batt. for 2min.
  • \012
  • shake it.
  • \012
  • on and off in different positions
  • \012
Repair Help & Product Troubleshooting for Canon PowerShot SX10 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?


\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

Hello, When I just bought this camera several years ago, I entered the time and date settings and after I've done this it never asked for time/date settings again. But now every time I turn on the power button, I have to set the time an date and press "SET" for OK. I read somewhere on the internet that others have encountered this problem as well. Can this be solved??? Thanks in advance, **** Muilwijk


You may need to take it in to the camera place to get the internal batery for the clock replaced also you may need to up load the driver program for the camera ... Canon PowerShot A520 Digital Camera

Camera keeps loosing the time and date settings. When turning the camera on the lens does not open, then a screen asking to set the date and time settings appears - once date reset the camera works properly. Unfortunately this seems to happen almost everytime the camera is turned off.


The problem is the internal battery that powers the storage of time and date. If the camera is unused for a while, it will discharge. You must put a freshly charge battery into the camera and leave it with the power turned off for 24 hours to charge ... Sony Cyber-shot DSC-W170 Digital Camera

Camera is 5 years old, It has been working fine. Batteries had become low and when I put new batteries in the camera switches on. the , the flash open, the viewer window lights up with set time and date option. The program dial shows low battery but I have tried three different sets of batteries. I have left the camera turned on as I write this and after a few minutes the lens does extend but when I tried it again it will no extend immediately as it should.


Make sure the batteries are the correct type and voltage for your camera. Also because of the age you may have corrosion on the battery contacts inside the battery compartment. If this is the case then no matter how many batteries you try they will n ... Digital Cameras

I am looking to buy a olympus m9010 camera. When you switch on the camera the date and time settings appear. If i don't set it, it will appear every time i switch the camera on. So i wanted to know if i set the date, time, year settings will that display when i transfer to my pc and when printing or it displays only on my camera LCD. i have this doubt because whatever is displayed in lcd will be the same when you transfer to PC. Hence please clarify. It will be better if you answer to the modeln


... Olympus Digital Cameras

Every time I turn my camera off I have to reset the time and date when I turn it back on. When I first got this camera I could set the time and date and it would stay set until I changed the batteries. what is the problem and how do I fix it?


The small internal battery has died.It will need to be replaced at a camera repair center. ... Polaroid A500 Digital Camera

When i turn on the camera, it always asks me to set time and date. If i click on yes, then i have to enter all the details as to the date, time, place. Also, the MP size defaults to 14MP instead of the previous setting, for e.g., if i had previously set it to 5MP, it would go back to 14MP after I turn the camera off and on.


Well, I have the same problem. Just introduce once the date and time. Turn off the camera. then turn the camera on using the button for presentation of pics (right arrow). You will see the last picture taken. Press again and you will be in shoot mode ... Nikon COOLPIX S710 Digital Camera

I received a canon powershot as a gift last year and am just now really starting to use it. The pictures seem fine, but the it seems like I am frequently requested to put in the date and time (i.e. about every 2nd or 3rd time I turn the camera on). Is there somethign I can do to get the camera to retain the date and time? It is sort of annoying that I can't turn it on and take a picture quickly since it won't let me take one until I have entered the date and time. Also, I don't think it is stamp


There is a button battery in your camera (CR1220) that remembers the date and other settings when you remove the main batteries. It probably needs to be replaced. It's in a slide-out holder next to the AA batteries (see page 184 in the manual). ... Canon PowerShot A590 IS Digital Camera

I have to set the date each time I turn on my Nikon S9 camera even when the battery is fully charged I have the Same Problem .. every time i turn ON the Camera .. it ask's me for the Date & Time .. that accoreded after my camera had a bad fall on the ground ?_?


... Canon PowerShot SX100 IS Digital Camera

The camera is 2 years old, when turning on the power it goes to the date set,you can change the year, then it slides over to the month, but seems froze up, then the camera resets itself, if you skip the date set up, it shows a view on the lcd, but can't take a picture, and the camera resets again. My son borrowed it and took pictures snorkeling, so it may have gotten wet, but the lcd screen is not distorted as it was a year ago when I got water in it.


... Olympus Stylus 770 SW Digital Camera

Every time I turn my camera on it asks me to set the time zone, area I am in, date, etc...again. It's causing problems when I download pictures. They're all out of order. Even when I reset the date, time, etc. it always asks me to reset it every single time I turn on my camera.


... Canon PowerShot S400 / IXUS 400 Digital Camera

Blurry images I purchased about a year ago a new Panasonic DMC-TZ4. And up until this point, I was in love with this camera. However, just recently, sometimes when I turn the camera on, the screen is showing images to be out of focus and blurry. All the settings are correct. Some times it stays like this for hours. Other times, I can turn the camera off and then back on and the blurriness goes away. Twice the camera has frozen and I had to take the battery out. And some times when I turn the cam


Sounds like a lens problem. If you've ever let the camera "auto turn-off" as a power-saving measure, any button pushed will turn it back on...even if it's in a case or your pocket. This puts strain on the lens as it tries to come out...result....lens ... Panasonic DMC-TZ4 Digital Camera

Kodak easyshare z712IS. sounds like a typical problem but...I try to turn it on, lens only comes out a little bit, then it turns off. I replace the batteries and the set time and date comes on...I set time and date camera turns off. I CAN in fact view pictures in the gallery but as far as taking pictures....nothing.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare Z712 Digital Camera

The date and time will not stay set. I set the date time . take pictures and when I shut the camera off. the next time I turn it on the date and time is zeros again...


The world of compact digital cameras is fast and furious blink and you'll miss the new model. These pocket point and shooters are cram packed full of features that most people neglect to utilize. So it's uncommon for the problem you describe to occur ... Canon PowerShot A710 IS Digital Camera

I put the correct time and date in and when I turn my camera off, it reverts to zeros and the year 2008. I have repeately put the right information in and hit set


Replace the date battery following the instructions on page 194 of the manual. ... Canon PowerShot SX110IS 9MP 10X Zoom Digital Camera

Set date and time comes up every time i turn on camera


Try resetting your camera. In picture taking mode press menu. Go to setup, go up to reset, press right arrow, make sure reset is highlighted and press set.Then TAKE OUT MEMORY CARD. Go back into menu, go to setup, go up to format, pres ... Casio EXILIM ZOOM EX-Z60 Digital Camera

Set date and time comes up every time i turn on camera


The date time is controlled by another 'button' type battery in the camera- like a watch battery, there 'go' in time.This is not a 'user' fixable item usually because it mean dismantliing the camera.Sending away will be pricey- well on th ... Sony Cyber-shot DSC-W55 Digital Camera

The date will not stay set. Every time we turn the camera on it opens with the date screen. We set the date and it then goes into shoot mode but the date is not set. All pictures are stamped with the default start date. Tried a new battery already.


To keep the date on, you have to leave the camera off with a charged battery for 24 hous to charge the inner battery that keeps date on. If this doesn´t solve the problem then is because the inner battery won´t charge anymore, but it wil ... Sony Cyber-shot DSC-W120 Digital Camera

I have to set time & date every time I turn the camera on.


Recharged battery then leave in camera unswitched on for 24hours ... Sony Cyber-Shot DSC-P8 Digital Camera

I have a canon ixus 9515. It works perfectly apart from the time and date. It sets the time and date no problem and it does adjust the time whilst taking photos. However as soon as the camera is turned off the time and date resets itself to the original information put in


If the camera do not hold the settings ..it means the internal battery is faulty and need to be changed..(equivalent to a bios/cmos battery on computers....it is just a small size battery designed to power the memory for the settings when the batter ... Canon Digital Cameras

I just recently bought a kodak zd710. When i received the product, i turned on the camera and i was immediately prompted to set the date and time. Once i finished, the batteries that the camera came with had quit on me. So i went out and bought new batteries, and when i went to turn the camera on again, the LCD screen did not light up. It has yet to come on when i turn the camera on. Is there any kind of troubleshooting i can try?


Battery usually come with very little charge when new.You must first charge the battery before use the camera. ... Kodak EasyShare ZD710 Digital Camera

My camera turns on, set date and time screen comes on, then once im done setting time it turns off


... Kodak EasyShare M1033 Digital Camera

Every time I turn on my Casio EX-Z75 camera it asks for the date and time and pressing the set button twice did not work nor resetting it to defaults or formatting the camera. Is there a way to hard reset the entire device to factory settings?


Here's the toll-free tech support number at Casio...they should be able to give you an answer:\0121-800-435-7732 ... Casio Exilim EXZ75 Digital Camera

I am observing problem with my canon powershot A520 camera which was purchase 5 years back, now every time I power on the camera it ask to set date and time and does not retain it what is likely problem with my camera ?


How long has it been since you had it serviced ... Canon PowerShot A520 Digital Camera

I have the FinePix z70. (I love it.) The manual tells how to set the date and time the first time you turn on the camera, but my kids failed to do that when they first used it. How can I change the date and time now? Thanks!


Press MENU/OK to display the menu. Highlight the left tab. Select Setup (wrench icon). Use up/down to select "Date/Time".\012\012\012It's all in the "Setup Menu" section of the manual (page 83 in my copy). ... Fuji FinePix F470 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5884 seconds