Having problems with your Canon PowerShot SX10 IS Digital Camera ?
Motor? noise. won't focus- I got a lens error- it
\015 Motor? noise. won't focus- \015\012I got a lens error- it wouldn't go back into place. there doesn't appear to be an obstruction, that was resolved by starting the camera with the auto focus button pressed. now I'm hearing a whirring noise when the camera is turned on, followed by a lens error. I've gotten the camera in an operational mode once, but it doesn't focus. It has never been dropped or damaged. I tried changing batteries.\015
This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.
A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).
Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Motor? noise. won't focus- I got a lens error- it
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot SX10 IS Digital Camera
Lens error. On power up, lens moves forward and backward but does not focus properly, and then camera gives the display 'Lens error'. Appears to be an electronic autofocus problem, rather than lens motor jamming due to grit etc. No unusual noise, anyway, from motors.
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Nikon Coolpix S210 Digital Camera
My nikon coolpix s220 have a lens error and when i turn it onthe lens goes in and out like its trying to focus and it makes a wierd noise. it also wont let me do anything it just pops up saying lens error
Try removing the battery/batteries and clean the contacts underneath. Also, clean the battery contacts and the charger, if so equipt. To do this, dampen a cotton swab with rubbing alcohol and rub the contacts. Blow into the compartment after to clear ... Nikon Coolpix S220 - Aqua Green 2.5" LCD Digital Camera
I have a D5000 camera w/ kit lens VR 55-200, less than a year old. Recently and only occasionally what is happening is when I press the shutter release button, the lens won't focus, it won't move in or out and it makes a odd noise, not the usual lens motor noise, but an odd squeaking noise, like it's trying to move but is stuck. The only way to correct it is to either shut the camera off and turn it back on again, or switch to manual focus, then back to auto. The battery is full, so it's not
Your camera is still under the one year Nikon warranty. Call Nikon's repair depot at 1-800-NIKON-US (1-800-645-6687) 9AM-8PM EST, Monday to Friday. They will verify your warranty and assist you in returning it for repair. ... Nikon D5000 Digital Camera
Focus error I am from the Caribbean Island of St.Kitts and I was on holiday in London, England in August 2006 and I bought this camera. It worked wonderfully and I took plenty pictures. I had no problems at all with it until now. When the camera was turned on there was a sound coming from the lens area. The lens are open and will not close. On the screen there is the warning display "focus error." Can I get a solution to fixing this problem Screen says focus error , makes noise.
Hi...The transmission system that moves the lens in and out has a problem with it's gears. There is most likely a gear or an actuator that has fallen out of alignment and is getting stuck at a certain point as the lens comes in/out.There is some dist ... Fuji FinePix A500 Digital Camera
My camera is in great condition and I'd hate to spend the money to get it fixed. It seems like everything else is working except for the lens...which is a big one! It never reads "ERROR" its just that the lens will not focus. It makes a noise when it is turned on like it is trying to focus. Even when I slightly hold the shutter button it makes a strange noise trying to focus but cannot. Any ideas of what I could do? I have air dusted it, gently pulled and twisted lens, restarted and recharge ba
First of all...stop telling yourself the camera is in great condition...obviously it's not. Now, try these:\012Fixing a Lens E ... Canon PowerShot SD770 IS / IXUS 85 Digital Camera
Lens Error. My Nikon COOLPIX L3 keeps on saying " LENS ERROR" and wont close up. Also it make some rattling noise when i press the on/off button or sometimes does it by itself. First the screen is bla
Try these procedures. ... Nikon Digital Cameras
My camera worked fine one day, then it was in my purse. When I went to use it the light was on and the screen said there was a lens error. Everytime I try to turn it on now it makes a grinding noise and refuses to open and then closes completely with the lens error reading For no reason my camera (Nikon coolpix model S210) doesn't want to work with the term "Lens error" and lens won't come out WELL YESTERDAY MY NIKON COOLPIX s210 DIGITAL CAMERA WAS WORKING PERFECTLY FINE THEM I GOT UP TO TAKE P
\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min. ... Nikon Coolpix S210 Digital Camera
My cameras lens wont come out, its stuck. when i turn it on.. it makes noises, & tries to come out, but wont extend.after like 10 seconds of it making noises, it saays lens error. i have a NIKON COOLPIX S202. please get back to me, i have a trip in a couple days & need to know if my camera will be in use. thank you!
Hi, ... Nikon COOLPIX L3 Digital Camera
Digital camera got dropped into the sand, and some sand worked its way into the lens and focusing system, and now the camera cannot zoom or focus, but still turns on and takes pictures i have a lumix dmc fx12, and it got dropped into the sand at the beach. the shutter wont close properly, there's sand in the lens, and it won't zoom. Please help!! i don't know how to fix it!!
THIS SOUNDS TERMINAL, BUT YOU MIGHT TRY USING CANNED AIR LIKE YOU USE TO BLOW DUST OUT OF YOUR COMPUTER, AND SEE IF IT HELPS ANY. MOST OF THESE CAMERAS ARE MADE WITH THE IDEA THAT THEY WILL NEVER BE TAKEN APART OR OPENED FOR CLEANING ETC. SO, THAT IS ... Digital Cameras
I dropped my camera and got the lens error e32 message. The lens was misaligned at first, but I straightened the lens out, so it did retract back in. Now, the problem is, when I try to take a picture, it won't focus on the subject. The green focus boxes come up, but it won't focus. What can I do?
... Canon PowerShot SD1400 IS IXUS 130 Digital Camera
My canon camera Ixus 8515 has an error when turning on (after some 'stuck' noises) that reads 'lens error, restart camera'. The lens is not retracting. The camera has not been dropped. Was working fine one minute, then camera appeared out of focus the next. When I turned camera off then on again, error appeared. Lens won't go back in. Have not tried forcing it as yet.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you wi ... Canon Digital SD900 / IXUS 900 Ti Digital Camera
Lens Error. My Nikon COOLPIX L3 keeps on saying " LENS ERROR" and wont close up. Also it make some rattling noise when i press the on/off button or sometimes does it by itself. First the screen is black then it goes to the welcome image last it says "LENS ERROR". How can I fix it myself? If you found out the solution please message me on myspace.
Nikon coolpix 4 lens error help! ... Nikon COOLPIX L3 Digital Camera
Lens error Lens is fully retracted. At power on there is motor noise and clicking but the lens does not extend. Screen reports "lens error" and the camera shuts down. Can the camera be partially dismantled to release the lens or is this a full repair job?
Try the procedures in this tip before taking the camera in for repairs. ... Canon PowerShot S95 Digital Camera
Lens error My Casio ex-z60 camara lens wont fully extend.When power is turned on, a clicking noise is heard. The LCD displays what will be captured, but is is blury. Then the lens closes and a "lens error" message apears on the LCD. Sometimes a message that says "retry power on" appears. Every thing else works fine. I am able to view my pictures .but I can not take any pictures.. Thank you
This is the lens focus gears. They are either knocked out of alignment, or debris has jammed them. The good news is it can be fixed....Casio most likely won't help. Hint...google my user name. ... Casio EXILIM ZOOM EX-Z60 Digital Camera
Error lens. red iron sand inside lens. When turn on start a noise, the lens don't come out and error. I'm tryng to open the camera, but I need a mechanical schematic how to arrive to the lens motor.
Google the words...disassemble a digital camera. ... Canon PowerShot Pro1 Digital Camera
I have a D90 and I just got, used, a 50 mm f/1.4 D lens. The lens motor sounds like it is working, but only moves the lens a small amount. Not enough to properly auto focus. It will manually focus, but the movement is not as free as another 50 mm lens I compared it to. Yes, I could bring it back, but if there is a simple fix, I'd like to do that.
Unless you have a lens collimator and other equipment, do not try to take the lens apart yourself. Take the lens in to a reputable camera shop and have their repair department do a CLA (clean-lube-adjust) on the lens. ... Nikon D80 Digital Camera with 18-135mm Lens
Nikon Coolpix s220...Lens Error. Camera was dropped from like 5 inches. Immediately received the error message screen. The lens is stuck all the way out...I have tried to do some of the above and while twisting the lens slightly got it to take pictures again, I think it may have done more damage because its still makes a buzzing noise when I turn it on and there is black on a portion of the screen like the cover is partially stuck (inside the camera).
Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Nikon Coolpix 2200 Digital Camera
Is there any way I can get my camera back to normal! I turned it on and it said "focus error". When I shut it off to see if it would start over correctly it would not close the lens. I turned it on and the lens closed and then opened again and wouldn't focus. I turned it off and the lens won't shut. How weird is that? It obviously is capable of opening and closing but seems to be reversed and makes a funny noise when it can't shut at the right time. Can I wiggle or giggle something? I bo
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to g ... Digital Cameras
My Nikon Coolpix S203 has a "lens error". Every time I turn on the camera, then lens goes crazy, moving in and out and zooming in and out of focus, all the while making a beeping noise. It then retracts back into the camera and the message "Lens error." appears on the screen. Please, is there anything I can do to fix this? Thank you.
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is that yo ... Nikon Coolpix S203 Digital Camera
Lens error my camera was a bit blurry so i used my shirt to wipe a bit of it then when i shut it off the lens got stuck and now when i turn it on its says "lens error restart camera." but every time i do its still stuck and makes a buzzing noise
The lens has probably got something in the retraction mechanism that is stopping it retracting. This can be something as simple as sand or grit or as a result of a drop or knock. In most cases the camera will need to be stripped apart to remove the l ... Canon IXUS 80 IS Digital Camera
S220 Coolpix has a lens error problem, turn camera on tries to focus (Lens moves in and out making a weird noise) but comes up with a lens error problem
Did it drop? sounds like the motor is trying to move the lens as you need, but the lens has come out of its tracking. If there is no outside damage and you still have warranty left, you should get it replaced, otherwise it means opening it to place t ... Nikon Coolpix S220 - Aqua Green 2.5" LCD Digital Camera
Photosmart r727 camera wont turn on. It begins to power on, then the lens wont open and it'll shut down. If I can manage to get it to stay on, the lens wont focus. I got it just 3 months ago and have barely used it. I charged it one day, and then when I went to start it was the first time this began to happen.
Your camera almost certainly has a lens error ... HP Photosmart R727 Digital Camera
Lens is stuck in the extended position. Turn off and on and it emits 2 buzzing noise like it's trying to retract the lens and then this error message pops up: system error (focus)
There could be sand or dirt in the mechanism. This would mean getting the camera serviced. With Canon cameras with similar problems, some people have found gently applying a twisting, pushing or pulling force to the lens barrel has freed it up. Good ... Panasonic Lumix DMC-TZ1 Digital Camera
I've got a Fiji S1000 finepix, the camera keeps sending me a 'focus error' or zoom error' that does not permit me too zoon in or out, it also does not permit me to take any shots. When i got it yesterday, The zoom worked, my guess is that a gear inside the mechanisms either broke or are stuck. When I turn the seletor knob, i hear some motor trying to work. What can I do to solve this on my own?
HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Fuji FinePix S1 Pro Digital Camera