Having problems with your Canon PowerShot SX110 IS Digital Camera ?
After I raise the flash and press the lightening
\015 After I raise the flash and press the lightning icon, I am not given the option to select Auto or On. Auto is the only option available. Please let me how to remedy this problem.\015
Try pressing the button before you raise the flash.
Repair Help & Product Troubleshooting for Canon PowerShot SX110 IS Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
After I raise the flash and press the lightening
Try pressing the button before you raise the flash. ... Canon PowerShot SX110 IS Digital Camera
OLYMPUS 410 all of a sudden mu camera wont take a picture, the video section of it works, but when you press the button to take a pitcure it does focus but doesnt take the pic, what is flashing continuously is the red lightening sign all the time, ! and the orange light on the viewfinder is permenantly flashing, whether im inside or out. would this be the cause of direct sunlight damaging the camera, its just a thought what do u think the problem is help !!! simon
It is something that seems to be a problem with the Stylus 410s. Olympus will not repair them unless they are under warrenty, I've tried. My best advice, and what I am in the midst of myself (I have 2 of these with the same problem) is to file with ... Olympus Stylus 410 / ? 410 Digital Camera
My camera ,power shot A580 will not take pictures ,sometimes the button won't press down to take the picture and sometimes it might take 1 or 2 pictures,then stops .What am I doing wrong? It's on auto and when I turn it on, there is a lightening bolt at the top of screen for flash
Does this happen in sunny outdoors or inside the room? If it happens inside the room, it could be because you have disabled the flash. If this fails to solve your problem, try increasing the ISO (sensitivity). ... Canon Digital Cameras
My daughter drropped her coolpix s8000 camera. It landed on the corner near the flash and bent in a little. The flash would not open up. I had to bend ti back so the flash will now pop up. However, the flash does not work with a message that says the flash is not fully raised. Where is the senso for the flash being raised?
I had the same issue, droped camera then even if flash is opened the flash was no triggered. As Paul said I found the sensor for sensing the flash position, I made a few trials then I soldered one pin of the sensor to the sensor's case like in the pi ... Nikon COOLPIX S8000 Digital Camera
Camera shake icon & raise flash icons appear even when flash is raised. Flash doesn't fire when taking picture
... Canon Powershot SX110 IS Digital Camera 9.0MP
I get "Flash is not fully raised" message when it's actually raised
... Nikon COOLPIX S8000 Digital Camera
My camera says Err 05 the built-in flash could not be raised the flash does raise
... Canon EOS 1100D / Rebel T3 Digital Camera
Nikon Coolpix L14 digital camera was dropped recently. Since then, when flash mode is set to AUTO, shutter-release button must be pressed several times to take a picture. If flash mode is OFF, shutter-release button takes a picture the first time pressed.
There is some misalignment within the camera that occurred while it fell. The possibility can be the trigger to the flash which was set off , there can be a crack on the electronic board, a possible switch issue of the flash trigger or a ... Digital Cameras
Flash My flash is stuck. When i press the flash a white square with an H on flashing. When i've tried to go in the menu my flash is darken out and when flipping through it skipps over the flash button. A little help please. Tina
Hahaha, I love your honesty! Are you married? ;-) ... Sony Cyber-Shot DSC-P92 Digital Camera
Canon A720 IS camera will not take a picture when flash is turned on but will if flash is turned off. I see a flashing flash symbol in the LCD panel (as if it is waiting for the flash to charge) when pressing the shutter and flash is turned on. Batteries are full charged.
This is probably the solution:\012 http://www.fixya.com/support/t2074406-wont_pictures_flash\012 \012 ... Canon PowerShot A720 IS Digital Camera
Flash I have a sony cybershot DSC-W50. Everything has been working fine until one day it stopped flashing. I have tried pressing the flash options button, but nothing happens. However, whenever I turn the camera on E:91:01 and a little squiggly arrow flash. Please help me! I have a Sony Cybershot DSC-S90 and the flash stopped working several months ago. Everything else works fine. Any solutions?
I think the firmware is corrupted ..... you must install new firmware ....just visit the nearby showroom or technician he will install the new firmware ..........for installing firmware it may costs some 300 to 400 bugs ....how eve ... Digital Cameras
My flash seems to be stuck in the "suppressed" mode. Also the Manual on page 64 refers to a "turn" of the "command dial" to the "flash mode setting". Since that item is not described anywhere else and the only turnable dial is the "mode" dial, I assume that it means to press the flash mode arrow. When I do that nothing happens. The flash modes do not display as described in the manual. I can't figure out how to get the flash to function properly again. I have made all my attempts with fre
Remove memory card and batteries, press and hold power button for 5 seconds, wait a few more minutes, put just the batteries back in and try it. Also make sure zoom and lens are not dirty and no debris on them. If so, use rubbing alcohol and cotton ... Fuji FinePix S1000FD Digital Camera
Flash Problem Rebel XT flash icon shows next to "busy" in the view finder when I press the shutter button. If I attempt to take the photo the flash does not work. If I continue to hold the shutter half way down, then release it I get Err 99. I am using genuine Canon lens' and have tried all three. I also connected my 420EX external flash and it also does not flash. Any suggestions are deeply appreciated. Thanks
Hey tombston,\015\012 An error code of 99 is Canons general error code for this camera, and they suggest cleaning the lens contacts and/or removing the battery and then reinserting it. If this doesn’t work I wou ... Canon Rebel XT / EOS 350D Digital Camera
The flash no longer works. In "auto" and in either the "auto flash" mode or "forced flash" mode no flash occurs. It is not in "suppressed flash" in the "portrait" screen position mode. The batteries are good. The shutter button is pressed after the charging is completed. The camera is not in "continuous shooting."
Hi there, \012Well first of all try to reset your camera, remove the battery from your camera for 4 hours and then insert them again, it helps you to do a hard reset in your camera. if further you have the same problem then there mus ... Fuji FinePix 3800 Digital Camera
The flash has been working fine until last night when I tried to take a picture and the flash was set to auto. When I press the button the little red light beside the flash sign lights up, but the camera does not take the photo. When I set it to flash mode, it still won't take a photo. When I turn off the flash, then it does. What could be the problem? Is it in the settings?
If your batteries are weak, the flash will not have enough power to flash and will prevent a picture from being taken. ... Nikon Coolpix S210 Digital Camera
Flash I have a sony cybershot DSC-W50. Everything has been working fine until one day it stopped flashing. I have tried pressing the flash options button, but nothing happens. However, whenever I turn the camera on E:91:01 and a little squiggly arrow flash. Please help me! i already try to reinitialize my camera but nothing happen. the flash still doesn't work. please help me. tnx
The flash circuit has gone out the squilling noise is the flash compasitor popped and the acid inside is burning. ... Sony Cyber-shot DSC-S700 Digital Camera
My flash is not working on my Canon PowerShot SX110 is camera. Help! My boss thinks the flash is turned off, but when I go to flash settings it says that red-eye and sync are both turned on. Basically I tried to use the camera outside the other night and the camera kept telling me to raise the flash even though the flash was up. The pictures were all blurry. I LOVE camera and am hoping for a simple solution.
... Canon PowerShot SX110 IS Digital Camera
The flash of my sx30 doesn't work, when i open the flash it was detected that the flash is open but the the problem is when i'm going to shoot even i press my shutter it doesn't take any picture and the flash sign in the screen just keep on blinking but no picture was taken. thank you!
Hion flash defuser unit up position, it doesn't allow to take picture. This means technically flash circuit is continuously sending charging signal causes blocking shutter release.( but not all of model, it is depend on model of camera.). Like thi ... Canon PowerShot SX30 IS Digital Camera
HI! the flash of my canon sx130 stops working. I tried pressing the flash button but it would not change to the "flash on" mode, the icon always says that the flash is off. I tried different camera setting but still not working. Thanks!
... Canon PowerShot SX130 IS Digital Camera
Everything seems to work but the flash. Everything has been fine for the 3-4 yrs I have had it. I noticed the flash loosing power. I got new batteries but still having the same problem. Outdoor pictures are fine. The flash unit pops up but does not flash when button is pressed. Thanks, Ralph
Hi rp27Just to clarify :You are saying that the flash is increasingly popping up but not flashing?Stephan ... Canon Rebel XT / EOS 350D Digital Camera
My problem is with the vivicam 3188 camera. I cant get the flash to come on. The manual only says it will noy come on if the batteries are needing to be replaced. Well my problem is I bought this camera on line and recieved it about 5 hrs ago and it came with name brand ones. The flash did work earlier. The camera has the flash off icon on. But by the manual the button I need to press to turn the flash on doesnt turn it on. Please help
Remove the batteries from your camera and the press the power button for few seconds say 20 sec , then release it.. put the batteries back to ur cam n try... tis is how u reset ur camera.... try tis ... Vivitar Digital Cameras
Mirror locked up at 125th or slower and infill flash does not flash. At faster speed it works fine. The display on top of camera goes virtually blank and battery display flahes a sif it battery was exhausted. If shutter release is pressed again then camera goes back to normal 'ready to sheet' mode.As flash is synced to 125th I suspect that the flash is the problem (or maybe it is just coincidence) I have tried cleaning, used lenses and put in a brand new battery. Any clues?
Canon EOS Elan/EOS 100 - an unofficial manual.\015\012http://photonotes.org/manuals/eos-elan/ ... Canon Digital Cameras
I bought my new canon eos 60D..i put on external flsah to use..then after i take off the external flash, my camera's built in flash cannot pop up to take flash even i had press the flash button. How?
Hi, What external flash did you use on your Canon 60D? The internal flash will not automatically pop up if in the "Creative Zone" it will pop up with the button in the creative zones (M, AV, TV and P) it will not pop up with the button if you are in ... Canon EOS 60D Digital Camera
My flash won't turn on for my iSonic digital video camera. The instructions say to press the "up" arrow on the camera in the capture mode. I do this, I hear a beep, the tint of the screen changes, but it doesn't flash in any mode. I either see a "no flash" symbol, or nothing, and either way it still doesn't flash.
... iSonic Snapbox DC-520 Digital Camera
White Screen Upon startup lens emerges but when screen appears it is white whereas it normally displays whatever the lens sees. When the shutter button is pressed the camera will focus and take a white picture which can be deleted. The camera does not flash although flash is set to automatic and photo taken in a dark room. Camera flashes (weakly) with flash set to manual on. Lens is unobstructed and appears to be perfectly normal. Camera was not dropped. Batteries have been changed.
\015\012Upon startup lens emerges but when screen appears it is white whereas it normally displays whatever the lens sees. When the shutter button is pressed the camera will focus and take a white pictur ... Pentax Optio E10 Digital Camera