Having problems with your Canon PowerShot SX110 IS Digital Camera ?

When I push down the shutter button the focus goes in and out. When I push it all the way down to take the picture, the result is always slightly off focus even if I put the camera on a solid surface or tripod

Answers :

Did you try putting the camera in Auto Focus mode to see if that resolves the issue? If not follow these steps to set it to AF mode. Press the Menu button-> Select the sub-menu which has the camera icon-> Then scroll down to AF mode and choose Single/Continuous, depending on your requirement and try shooting again. If problem persists then let me know. If not then please accept the solution.

These cameras have a focus ring that swivels inside the lens assembly, and is controlled by magnets and feedback from the main processor. Sometimes dirt, dust, lint, or sand can work its way into the lens assembly, and restrict the ring from fully focusing. You can try to spray some compressed air into the assembly as best you can, in the hope of freeing up the ring.
\015\012If this doesn't help, the problem could be something else, and the camera will require servicing, which can be expensive. Get an estimate before you have it fixed.
\015\012You might contact Canon to see if they can offer some support:
\015\012Good luck, and hope this helps.
Repair Help & Product Troubleshooting for Canon PowerShot SX110 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When I push down the shutter button the focus goes in and out. When I push it all the way down to take the picture, the result is always slightly off focus even if I put the camera on a solid surface or tripod

Did you try putting the camera in Auto Focus mode to see if that resolves the issue? If not follow these steps to set it to AF mode. Press the Menu button-> Select the sub-menu which has the camera icon-> Then scroll down to AF mode and choose Single ... Canon PowerShot SX110 IS Digital Camera

Camera takes photos without actually "focusing" on the object. Seems their is no "prefocus" with the button. As soon as you touch the focus button, the camera automatically takes the photo. When the camera was working correctly, you'd push the focus button half way down and then it would do it's job. Now it just takes the shot if you barely even touch the button. Not good...........

\015\012keep on pressing the focus button,then switch it on and try to focus\015\012or change the battery ... Nikon Coolpix 8800 Digital Camera

A friend dropped my camera its a casio exilim z1050 when taking a photo and the lens was stuck out, ive managed to push this in but now its stuck slightly out, its even on all edges its not stuck on an angle but even when i switch it on theres nothing it just beeps nothin shows on the screen and i cant view my photos with the play button even tho the battery has charge. can anyone help?

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Casio Exilim EX-Z57 Digital Camera

My camera is in great condition and I'd hate to spend the money to get it fixed. It seems like everything else is working except for the lens...which is a big one! It never reads "ERROR" its just that the lens will not focus. It makes a noise when it is turned on like it is trying to focus. Even when I slightly hold the shutter button it makes a strange noise trying to focus but cannot. Any ideas of what I could do? I have air dusted it, gently pulled and twisted lens, restarted and recharge ba

First of all...stop telling yourself the camera is in great condition...obviously it's not. Now, try these:\012Fixing a Lens E ... Canon PowerShot SD770 IS / IXUS 85 Digital Camera

My Rebel XT is NOT focusing sharply. It is on Auto focus and even when I put it on manual focus it is soft. The lens is on tight. It was working and sharp on Monday and on Wed. the shots seemed soft. Please help I have a shoot at 10am. Thank you very much.

Try looking here for a firmware upgrade:-http://software.canon-europe.com/products/0010192.aspIf that doesn't help, this is the url for their main support page, there online techs may be able to help.http://www.can ... Canon Rebel XT / EOS 350D Digital Camera

SD550 camera not focusing correctly. Green focus square sometimes shows up, sometimes not, either way, it's not clear even on the digital screen prior to taking the shot. Camera does make a slight click when turned on/when lens open. Any suggestion?

To make the green square show up just press the shutter button until half (this is called the half press) when the green square shows up then it means that the camera has focused already, if not repeat the process til green square comes out you can p ... Canon PowerShot SD550 / IXUS 750 Digital Camera

Battery/charger problem i brought my casio EX Z6O about a year ago but have had no problems with it until one day i put the battery in the charger and instead of a solid red light its flashing red and when i put it in my camera to see if it worked it didn't even come on. help!!! do i get a new battery or charger or can i get a free rerplacement

Y - I have the same issue. Apparently there's a problem with some of the batteries that were shipped. As stated by someone else here - I called casio and they promised I would have a new battery within 5 business days. I was on the phone less that 5 ... Casio EXILIM ZOOM EX-Z60 Digital Camera

My M1063 camera does not focus, even in timer mode and using a tripod the photos are out of focus. I get good pictures only in close-up mode. Is there anything wrong with my camera?

It sounds as if your camera is in close-up mode, where it only focuses on close-up objects. Try putting it into one of the other modes. What happens then? ... Kodak EASYSHARE M1063 Digital Camera

I put in new batteries in my Pentax ist-D and now the auto focus will not function. I get no beep or light to indicate when it is in focus because even when I move the button from M to Auto, the view finder still shows the M on the screen. All was working fine until now.

Remove the lens and clean the contacts on the camera body and the lens where they meet with a cotton swab lightly dampened with rubbing alcohol. Re-attach the lens and make sure the ring (if you have one) is set to "A". ... Pentax *ist DL Digital Camera

Camera lens movement mechanism seems to be damaged, as when switched on, the camera lens does not extend out completely and the object appears blurred on the screen. Similarly when switched off, the lens does not retract back completely and it needs a manual push to put it in a little more. But even then it does not go in fully. Rest of the functions are working well. The damage is the result of an accidental body weight going on the camera, when it was in on condition.

Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Digital Cameras

When I zoom in the camera, it will not focus on the subject and all "zoomed" pics are blurry even in a slightly zoomed shot. any help?

Hi,I Hope the steps below should be helpful in fixing your camera issue. ... Canon PowerShot SD880 IS / Digital IXUS 870 IS Digital Camera

Black image Just bought a used Canon PowerShot A60 digital camera. Menus work fine but LCD is black. When shutter button is pushed half way down the lower light blinks. I even tried to aim it at a lamp to see if it was too dark. Acts like it wants to take pictures. Lights blink, camera focuses, flash deploys, then nothing.

OK,Its problem of bad ccd imager in Canon A60 camera and this part need to be replaced to get correct live view to take snap.Canon will repair this camera free of cost as per announced scheme.Click ... Canon PowerShot A60 Digital Camera

I have a JVC camcorder model# GZMG37U. It does not keep it's focus even when I have it on the tripod so the camera doesn't move. Could you please find a solution for me. Thank you Velma Goertzen [email protected]

Check if Camcorder focussing mode is set to auto. This is perhaps the simplest and fastest way of focussing but definitely not the sharpest. You just spot the bird into the LCD, frame/compose the video and turn the sco ... Digital Cameras

When I turn on the camera,it either shows me zoom error or focus error.I have tried turning it on and off,taking out the batteries and putting them back,and even the "table-hitting" technique.The problem still persists.Please how can I take care of this?

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Fuji FinePix A805 Digital Camera

Coolpix L5 was functioning perfectly until today. Now it boots normally, focuses normally when the shutter button is partially pressed, but does nothing when the button is pushed all the way down. It will not shoot stills or video or even self-time a still shot. It behaves exactly as if the actual shutter release button is broken and doesn't make contact at the full pressed position. New batteries, memory card, resetting default menu settings--none of these help. It's running firmware 1.0.

ARe you sure that it is not stuck in playback mode? \015\012Here is a list of firmware and yours is not listed:\015\012 ... Nikon COOLPIX L5 Digital Camera

I have same problem with my 40D. Push the shutter button and it switches off. Have to remove the bettery for it to switch on again several times but still doesn't working. When I put battery back in the camera the access lamp blinks even though power switch is off. Any ideas??

... Canon EOS 40D Digital Camera

My olympus stylus tough 6000 keeps reverting to internal memory even when it has a memory card inside it. This is usually not a huge problem because i can pop the battery slot open and then take out the card and put it back in and it will usually fix the problem but i will be scuba diving in the bahamas in mid june and i have an underwater housing for the camera so as you might see popping the battery open at 40 feet below the surface could have some damaging effects to the camera. If you could

This happened with my camera. Try replacing the card, the card itself may be corrupted. It worked for me when I replaced it. ... Digital Cameras

I was taking photos over the weekend with my Olympus E-500 and the eyepiece viewfinder got darker than usual. I was using a promaster 5750DX flash. Even without the flash, the eyepiece viewfinder has remained dark. Also, I reset all settings to the default settings and now when the built in flash pops up, there are a series of three "beeps" and the camera tries to focus. I cannot get it to take a photo however. I also pushed the button for the sensor cleaning today. Could this have screwed u

Hi,\015\012Before doing sensor cleaning did you keep camera on bulb setting. This allows the cameras mirror to stay up until you choose to close it\015\012When you press the shutter release button it will lock the mirror up out of the way ... Digital Cameras

I was trying to put in my password and it would not take the password and the key keeps flashing to tell me the trail camera is still locked. Now I can not even get the trail camera to start when I push the power button. It comes up with the dashes and immediately shuts down. I don't understand any of these problems and how do we get this corrected?

See "forgot password" above. Bushnell has a serious problem on their hands if they want to continue selling these cameras.\015\012\015\012They need a PIN # for each camera. ... Bushnell Trail Sentry 11-9200 Digital Camera

Unscrewing lenses When I change lenses, it has lately gotten very difficult--like a jar you can't get the lid off. Also, when I put the zoom on, it doesn't focus anymore--I'm not sure I am even able to twist the lens in adequately. Any suggestions on how to get that smooth twisting back?

Hello toccata,\015\012It sounds like your lens mount is cross-threaded. Have you gotten a lens off and looked closely at your camera lens threads. Are they crunched together. You may need to get your cameras lens mount replaced and check all your len ... Olympus EVOLT E-300 Digital Camera

I have the first digital rebel and as of lately my images are not as crisp as they used to be. Im having this issue even when I use a tripod...I also use auto focus and the images are not as crisp/clear...do u have any suggestions to help correct this

When you take the lens off .. there is a mirror and the CCD array ... those can get dusty or if anyone smokes around the camera then that gets on these parts .. you can dust the mirror and CCD behind with a soft clean camel hair brush but a good clea ... Canon Rebel XT / EOS 350D Digital Camera

HELP i have a minolta dimage z20. it will not power up.batteries are good, light comes on when the power button is pushed but it seems to freeze up. the green power light will come on but to turn it off, u have to pull the batteries. to my knowledge there has been no trama to the camera, worked just fine when it was put back in case. not exposed to any extream elements, no water or anything like that. any suggestions on where to even start trying to find out the problem...thanks so much, monica

I have a Z2 and Z3 and I've never had that problem. I will assume that the batteries are in their proper positions and that the terminals are clean. With this assumption I would suggest you bring it in for repairs. Something w/ the power supply, s ... Konica Minolta DiMAGE Z20 Digital Camera

After you put in the tape and push the record button it will start recording for 3 to 4 seconds. I did notice that the drive motor as you look through window to see the tape moving. The tape seems to be jerking and not moving at an even speed. Does anyone have an idea on whats wrong with it or better yet how to repair the problem. Thank you for help and time with this. dom:)

Well you said there was a tape with it and that you could see it moving.\015\012But, you have it under Digital Cameras which generally use flash media, nowadays.\015\012Some older camcorders used tape.\015\012\015\012I think t ... Digital Cameras

We have a Bushnell trailscout 11-9600 and the SD card won't click into place. When you put it in, you can just pull it right back out without having to push it in the second time to get it out. Even with the card in it says No SD Card

... Bushnell Trail Scout 11-9830 Digital Camera

I slightly dropped my Canon SD 1400 IS, it wasnt even a drop. Camera is all good, and everything works but it doesnt focus far away! is there anything i can do?

The only suggestion I have (that might not be a camera fault) is to make sure that you have not left the camera in Macro mode. This is a special extreme close-up mode offered by some cameras, and it does not allow autofocus on objects at normal dista ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1437 seconds