Having problems with your Canon PowerShot SX110 IS Digital Camera ?

Canon sx110 flash is not working. It says to raise flash even though the flash is up

Answers :

Repair Help & Product Troubleshooting for Canon PowerShot SX110 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My flash is not working on my Canon PowerShot SX110 is camera. Help! My boss thinks the flash is turned off, but when I go to flash settings it says that red-eye and sync are both turned on. Basically I tried to use the camera outside the other night and the camera kept telling me to raise the flash even though the flash was up. The pictures were all blurry. I LOVE camera and am hoping for a simple solution.

... Canon PowerShot SX110 IS Digital Camera

Canon sx110 flash is not working. It says to raise flash even though the flash is up

... Canon PowerShot SX110 IS Digital Camera

My Canon EOS Rebel XS digital camera has suddenly stopped taking pictures. It will not focus even though it is on the auto focus setting. The first set of numbers are flashing and there is a flashing dot behind the ISO 800. It was working fine when I used it one time and then the next time it wouldn't. I can view pictures, but cannot take them on any setting except A-DEP and it's not focused even then. Please Help!

Try cleaning the contacts on the camera body and the lens where they meet with a cotton swab lightly dampened with rubbing alcohol. ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

My Canon EOS XTi keeps giving me an 05 error code which means that the pop up flash was impede . It does this every time even though I have made sure there is no obstruction at all. I tried gently to pop up the flash by hand but it won't budge and I am afraid to damage it by forcing it. Is there I lock on it somewhere that I don't know about? It says nothing at all about the issue in the operator's manual. Thanks, Bill

Dear Bill,the Pop up flash activates a switch which sends it message that it is up. Now there can be few things which are stopping it from doing that.1. Something has stuck, so small piece of anything,in the switch and not letting it oper ... Digital Cameras

Blank lcd I just got a new canon 600D. After playing with it for a while, i turned it off. Then after 5-10 mins i turned it on once again, and opened the lcd screen, but it shows blank(or say black). I can see that the lcd backlit is workeing, but nothing (no content) is displayed. Can this be an issue of low battery ? pressing the shutter button full also not capturing the picture. Flash works though, and optical view finder too, but it does not capture the photo.

Hi there:Some symptoms of a defective CCD include distorted images or abnormal colors, scratchy purple lines, blank or black pictures, and/or black videos with good sound being recorded on the camera's flash card. ... Canon EOS 600D Rebel T3i Digital Camera

I have two issues with my Canon EOS Rebel XS. One issue has been acting up for a while: If I turn the camera on and try to shoot, it tells me shooting is not possible and to turn the camera off and on again or redo the battery insertion. The only thing that works is if I take the battery out and in and turn the camera on again. The second problem started yesterday. My camera would not turn on so I thought the battery was uncharged even though I got no message saying that. But after chargi

Hi,\015\012\015\012You may get the ERR XX before (Shooting is not possible, Turn the power switch to off and on again or reinstall the battery) , where XX is the error number..\015\012\015\012Please leave the error numb ... Digital Cameras

I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju

Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Canon sure shot, auto focus,38mm,1:2.8 batterres good, film return works...lens shutter open will not close,with switch nor will flash light even though the indicator light lights up that it should be ready.

... Digital Cameras

I can't seem to get my autofocus to work on my new Canon T1. The mode dial is switched to full auto, the fous mode switch is on AF, and the Image Stabilizer switch is in the "on" position. When I depress the shutter halfway, I get flash indication, some digital numbers, but no change in focus, no beeping, even though it is on and the focus confirmation light does not illuminate. I've searched through the manual to see what I am doing wrong, but can find nothing. Any help you can offer would

Hope I can help with some input to your problem. Let me suggest please that you switch the "mode" dial to "P" for program, check your ISO (I personally shoot ISO 100) and set it for a speed ISO 400 or lower. Most DSLR's use contrast to focus so a mir ... Canon EOS Digital Rebel XTI Digital Camera

I have a canon a2200 powershot hd and the flash is not working. Even if i set the flash ON at the program setup it's not working. I can see the flash lens flicker but the light is so weak like it&

... Canon Black PowerShot A2200 14.1MP Digital Camera with 4x Optical Zoom and 3 in. LCD

I have a Canon EOS 40D camera. We are having problems with using an external flash. The pictures always come out extremely dark with the external flash. The flash seems to work fine, it flashes brightly. The pictures look fine using the built in flash. The flash is a Promaster but we tried a Canon flash and it did the same thing. The camera store we bought the camera and the flash from says it looks like a synchronization issue and that it is a hardware problem with the boot. Their sugges

I don't know if this will help and this post is two months old. The \015\012camera store may be right that the synchronization is the issue which \015\012tends me to point a finger at the external flash. There are at least \015\012three different fla ... Canon EOS 40D Digital Camera

My daughter drropped her coolpix s8000 camera. It landed on the corner near the flash and bent in a little. The flash would not open up. I had to bend ti back so the flash will now pop up. However, the flash does not work with a message that says the flash is not fully raised. Where is the senso for the flash being raised?

I had the same issue, droped camera then even if flash is opened the flash was no triggered. As Paul said I found the sensor for sensing the flash position, I made a few trials then I soldered one pin of the sensor to the sensor's case like in the pi ... Nikon COOLPIX S8000 Digital Camera

HI! the flash of my canon sx130 stops working. I tried pressing the flash button but it would not change to the "flash on" mode, the icon always says that the flash is off. I tried different camera setting but still not working. Thanks!

... Canon PowerShot SX130 IS Digital Camera

The Fuji S4500 still works for taking pictures but the flash does not work when asked to. No problem popping up but even if "forced" to flash, nothing happens. I have not yet tried the firmware upgrade though so will do that and if works, thanks.

... Fuji FinePix 4500 Digital Camera

My Canon A430 Camera got a bit wet when I fell into a Dam this weekend. The camera did not at all touch the water, but a few drops of water did land on the camera. After drying the few drops off, the camera still worked for the whole day as well as the whole evening, but the next morning the camera did not work. The green light above the screen on the top left does flikker when the camera is turned on (which is normal). I am even able to take a photo and the flash works. Through all of the the s

Apparently, Some water worked its way into the camera circuitry. You need to stop trying to get it to work...you're only making things worse. Remove the card and battery. Bury the camera in a bowl of dry rice for a few days to absorb any moisture. ... Canon PowerShot A430 Digital Camera

I have a Canon Power Shot A720. Outdoor photos are beautiful. Indoor photos are always grainy/blurry...a lot of noise. I have tried the ISP feature but there are only two choices... 1. Auto or 2. High ISO Auto Either setting, the indoor photos are grainy. Further, there are times when my flash will not work. It won't work on Auto setting or when I try and "force flash" it. No flash and the photo will not allow a picture to even be taken. Any suggestions? Thanks

This is probably the solution:\012 Wont take pictures with flash ... Canon PowerShot A720 IS Digital Camera

Recently a friend bought him a Canon mf-7000dv which works well but it gave me an achiever 260t flash but it shoots 3 feet or 20 and would like to know if you have a flash or derect any option to activate it, as you know the falsh in the rear has a LED auto check a button that says off-on in this asset will function on and off like nothing. And another LED that says ready .. and finally a red light and said test .. I do

... Digital Cameras

I have a Canon 7D camera. When I put the Compact Flash on my card reader in the computer, it will not open the photos. I have 3 camera cards and only 1 brings up photos. These cards have all been formatted. We shoot in raw. Up until today, they all worked fine. FYI, I go into "my computer" and open up the card from there. What I see is 4 yellow folders. Three of them are "CRW" Files 847 Canon, 848 Canon, 849 Canon. The 4th one says Canon MSC and there are 3 CTG files in it. When I

Open the card and run a file search for ,jpg files to see if they are in some other folder and let me know ... Digital Cameras

My flash quit working on my canon EOS 500D on every mode, when I go to flash control in the menu and click on built-in flash func. settings it says ... this menu canot be displayed. external flash is attached, but there isn't an external flash attached?

This camera is only one model period old, is it still under warranty? If so take it in for service. I'm including a diagram of the manual release button on the side of the camera for the flash. Try pressing this button to see if it pops up. If not th ... Canon EOS 500D / Digital Rebel T1i Digital Camera

The camera that I have is an red HP A730 with 7 megapixels. I've had it for about 3 years and it's always worked just fine. But, recently I lost my memory card. My camera still worked with out it. Anyway, the other day I tried to turn my camera on and it didn't work for some reason. I thought it was the batteries, so I changed them, but the light indicating that it's on flashed for a second and then turned off. Now, even though I'm using new batteries, my camera will not turn on. I will admit, I

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\012\01 ... Digital Cameras

I just bought a canon powershot sx120 is today. I can't get the flash to work. I lift the flash and once in about 20 tried it goes off but other then that it won't even take photos if the flash is up.

If the flash is on AUTO it will only fire if it needs to, such as in dim lighting. Try putting the flash to ON mode and see what it does. More likely this is a power problem. It needs fully charged batteries to fire o ... Canon Digital Cameras

The canon powershot A200is won't flash. have to turn off the lightening bolt flash to take picture. Can not get any of the flashes to work even after reset to manual setting.

... Canon Powershot A2000 IS Digital Camera

I have Canon power shot S2 IS digital camera.I bought it around 2 years back.Now my camera is showing the sign of "change the batteries" even though the batteries are fully charged and the lens does not come out..When I tried the same batteries on other digicamera they are working fine. Very few times the camera starts working but after taking 2 or 3 pics the low battery sign appears on the screen.I use AA size NiMH Sony batteries. Can you let me know the solution to my issue.

I suggest replacing a fresh battery will most likely solve your prob, overtime rechargeable battery can drain easily, try changing with a new battery and see if it does work well, there might be insufficient current, thats why it tends to drop of vol ... Canon PowerShot A540 Digital Camera

My canon eos 40D keeps playing err-05 which says pop up flash not working and to turn camera off and on again to solve problem, but nothing happens and camera will not work. what can I do?

If the camera thinks you have an external flash attached to the hot shoe it will not allow the built ... Canon EOS 40D Digital Camera with 28-135mm lens

Hi, I have a Canon PowerShot SD1100 IS. It says the memory card is locked every time I insert it even though it isn't. I tried several cards to eliminate the possibility the card was bad. I received a repair estimate at $79, because the card reading board needs to be replaced. Am I being scammed or is it a fair estimate? Is it worth it or is it better to invest in a new camera? This one is not even 2 years old...

... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3405 seconds