Having problems with your Canon Powershot SX110 IS Digital Camera 9.0MP ?

Having problems downloading pictures from the camera and when I go into device manager and select - I get below message: I have clicked on the "check for solutions" button but get no response from Microsoft. Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.


Answers :

Repair Help & Product Troubleshooting for Canon Powershot SX110 IS Digital Camera 9.0MP

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Having problems downloading pictures from the camera and when I go into device manager and select - I get below message: I have clicked on the "check for solutions" button but get no response from Microsoft. Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available.


Please get the driver here :\012www.driverskit.com/Camera/Canon.html\012\012 ... Canon Powershot SX110 IS Digital Camera 9.0MP

My computer (Vista 32-bit) does not recognize my Canon Eos Xs now. It did last week. I looked it up on Control Panel/System/Devices and I see this message "Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available." Windows checked for a driver upgrade and reported that what is installed is the latest softw


Sounds like you may have some corruption beginning on your hard disk - try running CHKDSK /F from an administratively-enabled command prompt. It will prompt you to reboot, then it will run a consistency check on the disk and its filesystem upon boot ... Canon EOS Digital Rebel XS / 1000D IS Digital Camera

Camera fufifilmF40fd connects to computer but computer cannot access pictures -Device manager Code 19 says cannot start this hardware device because its configuration information in the registry is incomplete or damaged, could not load driver software. It says when i check the driver that the best software driver is installed and up to date. problem code 00000013 date 21.6.06, 6.0.6001.18000. Any solutions?


Two things need to be done :\015\012\015\0121. Uninstall all the drivers of your camera installed by windows, from the device manager. After doing that use a registry defragmenting software to rectify the errors in the registry. ... Digital Cameras

I plug my camera into the computer and nothing happens. I checked the device manager and the following message appears: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19).


Try using a separate card reader instead of the camera. Works every time. ... Canon PowerShot SD890 IS Digital Camera

My PC is not recognizing my camera, so i cannot download my pictures. It used to work fine for 2 years. In the Device Manager it gives me the following message: Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19). My software is up to date. Help!?!


Windows updates has changed the registry and now your camera is no longer recognized. No problem....just get a card reader and use it instead of your camera for downloads. ... Canon PowerShot A570 IS Digital Camera

Windows 7 says Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19) Canon Powershot SD750


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Canon PowerShot SD500 / IXUS 700 Digital Camera

Canon powershot a630 Windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damaged. (Code 19)


... Canon Digital Cameras

Can't transfer or view images from camera to computer. All USB ports are working on computer. Double checked connections. Get following messages: 1. installing device driver software 2.searching pre-configured driver folders 3. software for this device has been successfully installed...pending.


Consider NOT connecting the camera to the computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to th ... Sony Digital Cameras

My Canon Pwershot A590 Is is not recognized by the computer and in the device manager window it says "This device cannot start. (Code 10) Click 'Check for solutions' to send data about this device to Microsoft and to see if there is a solution available." what can i do?


Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or c ... Canon PowerShot A590 IS Digital Camera

Cannot get device information


Looks like you need to run the installation disc that came with the camera , first you should remove any information of camera register to your computer (unistall it) then run the program again ,hope this helps ... Digital Cameras

Cannot get device information


Go to Kodak.com, only the creators can find a solution to solve a problem with the created ... Kodak EasyShare M853 Digital Camera

Canon Speedlite 580EX - batteries loose charge in less than 24 hours, with flash OFF: One of the 2 Experts who gave me solutions, asked whether I did get the capacitors's specs from anyone. No, I did not get those, and would be very grateful to receive them or a link to somewhere where the answer may lie. I will try and get the capacitors checked and replaced if any is broken/leaking. Thanks in advance. Rgds Alberto+


Hello AlbertoPlease refer to your previous question as you will be charged for another session should this post remain open. Please also e-mail [email protected] to have this question canceled.Kind RegardsStephan ... Digital Cameras

I have a EX-Z3 (product no. 2031914A) camera. I recently upgraded my PC which runs Microsoft Vista - previously I ran Windows Office 2000 Professional and with Picasa 2 had no problems. However, my new computer sappears not to recognise the Casio camera as an attached device...I have loaded and reloaded the software and checked and double checked connections and the USB cable. What could be the problem and is there a simple solution (for a non-technical person)?? Many thanks. Roger Neilson r.nei


Uninstall the software.reinstall the software with camera not connected to usb.this often solves the problem. ... Digital Cameras

I have a problem with my Kodak DX4530. The Kodak software will not recognize the camera I get the message, "Cannot get the device information." User/Password: Nickname: duanegoddard Password: 63e85


Why go through the head ache of this problem, just buy a very cheap (less than $5) memory card reader and read the SD card directly with the USB card reader.\015\012here is a link to a USB card reader on ebay.\01 ... Digital Cameras

I have had this camera for several years now but only recently put a mem card in it. It just keeps telling me to check card. I have tried 2 or 3 cards and reset the menu settings a few times but still always the same message. What's up? Today I tried to download a few pics from the internal memory but my HP solution centre tells me that there is no mem card in the device even though I have down loaded from the internal mem several times in the past. I checked the settings in the cam and they see


Hello. After you put the memory card into the digital camera you must go into the menu and find the format button. When you push it, it may ask if you want to erase the contents of the card. Answer yes. Once your card is formatted it should work ... Vivitar ViviCam 3740 Digital Camera

Computer cannot get device information. Connected to the computer the photos don't get down loaded


I would go to the camera's manufactor's website and download the drivers for your current windows. ... Kodak EasyShare One Digital Camera

Hook Up. The C643 digital zoom camera was working ok, with my Windows 98 S.E. Then I F-Disk and reformatted my computer. Now when I try to use it. I keep getting this message. (Cannot get the device information) Took it out and put it back in serveal times. Same thing. Sent letter to Kodak. Got back sorry we no longer support Windows 98 and the web page they sent me was no help at all. I'm kind of upset. Been using it for a year on Windows 98 S.E. And now they say tough.


Yeah that's frustrating.. here's something that might help though.Follow this link:http://www.kodak.com/global/en/service/downloads/dln_ekn031209.jhtml?operatingSystem=windows_98_se&downloadLanguage=enThere yo ... Kodak EasyShare C643 Digital Camera

Canon IXUS 70 Downloading to computer.


I've Canon IXUS 70.\015\012My camera is full with images.\015\012I can't download images to my computer. \015\012Pls help me that: \015\012 How can i download the images from my camera into my computer.\015\012\0 ... Canon PowerShot SD500 / IXUS 700 Digital Camera

When trying to transfer pictures to my computer from my Kodak EasyShare C743 I get the message cannot find device information


Your PC is not recognizing the camera... most likely because the appropriate Kodak driver is not installed. Download "KODAK EASYSHARE Software" from the following web page... ... Digital Cameras

The camera wont connect to the computer. when i plug it in and turn it on to download the pictures, it says can not get device information. help!


\015\012\015\012You dont need the disc to download to computer.Take the card from the camera and put it into the card reader on your computer if one is fitted, if not you need one that goes into a USB slot\015\012When the card is inserted into ... Kodak EasyShare C613 Digital Camera

My kodak c643 camera wont transfer pictures? error cannot get device information?


Did you try installing the software and drivers ... Kodak EasyShare C643 Digital Camera

Cannot get the device information keeps popping up when I try to download pics to my computer. what do I do to fix this


Having gone over a month with no response, I assume my suggestion had some merit. ... Kodak EasyShare M853 Digital Camera

When I turn the camcorder on there is no view and the lens cap is off Hi I phoned Canon this morning and they informed me that it needed to be fixed by a technician He said that unfortunately it was a common fault that occured with this model MV630i and providing the fault was what he thought it would be, the camcorder with be fixed with no charge There was no quick fix solution A lesson for all is to check your camcorder regularly and not wait until it is required for a special ocassion.


... Digital Cameras

Hi! I have a Canon Powershot A530 digital camera. When I try to import pictures to my laptop(OS-Windows Vista), I get an error message "No new photos or devices found". Please provide me with a solution.


1. Try to reinstall your camera driver / software again.\015\012\015\0122. Restart the PC/Laptop.\015\012\015\0123. Now, connect the two devices for importing pictures!\015\012\015\012please rate this advice if it ... Canon PowerShot A530 Digital Camera

My camera is working fine. But yesterday when I put it onto the dock and tried to download pictures onto my computer, I got a message that said: "Cannot get the devise information." I found my Easy Share disk and ran the "repair" program. When that didn't work, I contacted my Norton help line. A gentleman checked out my computer and said all was fine. Still couldn't download pics. He suggested I contact you.


Are you using a Kodak EasyShare camera? ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1554 seconds