Having problems with your Canon PowerShot SX130 IS Digital Camera ?

I need to set the resolution to no more than 10 mb in my canon Powershot sx130 IS. How do I do this?


Answers :

A resolution of 10mb, even if you could set it that small, would look worse than a crayon drawing by a 3-year old.
Repair Help & Product Troubleshooting for Canon PowerShot SX130 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need to set the resolution to no more than 10 mb in my canon Powershot sx130 IS. How do I do this?


A resolution of 10mb, even if you could set it that small, would look worse than a crayon drawing by a 3-year old. ... Canon PowerShot SX130 IS Digital Camera

Hi, I have a two year old Canon PowerShot SX1. Recently began to think my shutter speeds have been on the low side, based on ISO, aperture, and general lighting conditions outside. Went out and purchased a Canon PowerShot SX130 just to compare. Took about 25 shots with each, same subjects each time, same settings, same position, about 15 seconds apart. Discovered that, on average, the SX130's shutter speeds were over 3 times higher than the SX1 for proper exposures. For instance, at ISO 100


You may be right, from the details and data you've provided. Unfortunately, you would probably have to pay a service charge to prove it, and they would most likely replace the main board, and charge accordingly. I, myself, would just adjust to t ... Canon PowerShot SX1 IS Digital Camera

Need user manual for canon sx130 is - Canon PowerShot SX130 IS Digital Camera


You may download the manual here. ... Canon PowerShot SX130 IS Digital Camera

How to set timer in powershot sx 130?? - Canon PowerShot SX130 IS Digital Camera


Press the self-timer button (marked with a one-handed clock). Use up/down to select an option. Start the self-timer by pressing the shutter release button. ... Canon PowerShot SX130 IS Digital Camera

How to set time / date on canon sx130is - Canon PowerShot SX130 IS Digital Camera


... Canon PowerShot SX130 IS Digital Camera

Poor Resolution I have 3 cameras 2 canon 750 powershot and one olympus fe-230, I uploaded the photos to Shutterfly and all photos from the 3 cameras said poor resolution.  I reset them to the factory settings and tried again, same response.  what is going on?


E sure the quality setting is the highest - 7 megapixels. Otherwise, why buy a 7MP if you shoot at 3MP. The Canon 750 seems to have excellent picture quality where the Olympus has soft focusing (reviews at C-net). ... Canon PowerShot SD550 / IXUS 750 Digital Camera

I have Canon Ixus 70 dig cam. I need to set it to the lowest possible resolution to facilitate e-mailing photos for work purposes. I have lost manual and having played around with my camara I can not see how to change the resolution. Can you help?


Easier way to do it:\015\012After it is downloaded to your computer, right-click on the picture and choose e-mail recipient. When the box opens, you can choose more options as to size. That way, your original stays the same size. ... Digital Cameras

My canon powershot s45 works fine , until i plug it into my computer. then it wont even power up . its not my ports or cords i checked them. i dont have the manual & i think that a setting was changed or something . what settings do i need it on to transfer my pics to my comp?


When connected to the PC the cameras display will blank out, this is normal. If the cameras "Communication" setting is set to "Normal" you can only download images when the cameras drivers have been installed of the bundled CD. If you change it to "P ... Canon PowerShot S45 Digital Camera

I need a manual desperately. My husband doesn't have it and the pics are either too dark or distorted, no matter what setting I put it on. I dont' know what all of the setting do to begin with so this makes it all very difficult. The pics I took at my children's baptism are awful....all because I don't have a manual. On the camera is the following: Canon PowerShot SD950 IS (digital elph) 12.1 mega pixels Titanium


Http://www.usa.canon.com/cusa/support/consumer/digital_cameras/powershot_sd_series/powershot_sd950_is#BrochuresAndManuals ... Digital Cameras

I haven't needed the timed photo mode and so am not sure if the Canon Powershot A80 has the ability? I feel like a bit of an idiot asking this... but if it does, how do I get there and how do I set it up? Thanks so much. From technology, challenged person from the era of manual SLR's...(and that was wayyy before this digital relic came out!


Press the FUNC/SET button. Use up/down to select Drive Mode (the rectangle, third item from the top). Use left/right to select the desired delay and press FUNC/SET. Start the self-timer by pressing the shutter release button as usual. ... Canon PowerShot A80 Digital Camera

Canon Powershot SX100: Need help finding setting to change image size/resolution to save space.


Press "set" then go to the two bottom options. change the resolution to the last and the size to the size you want ... Canon PowerShot SX100 IS Digital Camera

Hi, we just bought the Canon PowerShot SX 120 and have found that it produces a "halo effect" around all white objects in photos and videos. We have reset it to factory settings and the problem continues. Has anyone had the same problem? Do we need to return it?


If it were my camera, I would go to the support section of the canon website and e-mail one of their techs with the problem....they can advise whether a fix is available or warranty service is recommended. ... Canon PowerShot SX120 IS Digital Camera

I need reset my cannon sx 130, how i can do? - Canon PowerShot SX130 IS Digital Camera


Remove the battery out of the camera for 15 mins, then insert the battery and go to the camera's menu setting and set the date and time. ... Canon PowerShot SX130 IS Digital Camera

Lost our manual for our canon powershot A1000is. Need to know how to use the timer and set camera so we can be in the photo


... Canon Powershot A1000IS Digital Camera

My Canon powershot SX10is LCD screen does not work when it is open (extended from the camera). Is there a setting or something I need to change


Press the Disp button near the bottom right of the LCD display housing.\015\012\015\012You may need to press it twice to switch the display back to the LCD from the Viewfinder. ... Canon PowerShot SX10 IS Digital Camera

My canon powershot a580 is frozen on the date set menu.. will not do anything else... is there a firmware in there that could be corrupted and needs reinstalled??


Try this. Remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Canon PowerShot A580 Digital Camera

PORTRAIT SETTING ON Canon Powershot A710 IS GIVES EXACTLY SAME PHOTO AS ON AUTOMATIC. NEED I ACTIVATE SOMETHING ELSE TO GET A BLURRED BACKGROUND?


Portrait provides extra sharp focus on the subject. It also opens the aperture some, and may in SOME cases give you a blurred backbround depending on the distance of the subject and background to the camera. \015\012\015\012If outdoors, ... Canon PowerShot A710 IS Digital Camera

Need instructions for functions and settings - Canon PowerShot A460 Digital Camera


You may download the manual and more from here. ... Canon PowerShot A460 Digital Camera

I have a Canon Powershot SD630 and need to know how to set the option of displaying date/time on images. If you can let me know, i'd really appreciate it. Best Regards


That should be in the camera menu. ... Digital Cameras

Hey, I just purchased a Canon Powershot A720 IS today and as I was messing with it the LCD screen just went black. The icons on it show up, but when I take a picture its just black, as if the shutter isn't open or something. Is there a setting I accidentally hit or what? Help please, I'm going to Germany in 4 days and need to get this all worked out.


First turn on the camera and press the DISP button on the back of the camera (lower left corner). The DISP button manually turns the screen on and off to save batteries. But if that doesn't fix it, then take the camera back for exchange. Black pic ... Canon Digital Cameras

Black screen hi, i have a canon powershot A75 and when i turn the camera on i see the blue logo then its supose to be the picture screen but my picture screen is black n fuzzy i dunno y i thought maybe the settings were wrong but i dunno plz help me i need my camera for my brothers wedding help me fix this problem! remember black camera screen! thank you sue


Hi,\015\012Your Canon A75 camera has problem in CCD Imager and this part will be replaced to get back picture.\015\012Canon announced free of cost repair scheme for subject problem and you can see details by clicking ... Canon PowerShot A75 Digital Camera

Canon PowerShot SX10 keeps telling me that I need to replace the batteries even after I replace them with a new set of batteries. After a few pictures it will shut off.


May I suggest going to the Canon website, follow menu options Support and Downloads and look for a firmware upgrade. ... Canon PowerShot SX10 IS Digital Camera

I'm using a Canon PowerShot A570IS, and am getting only 20 to 30 photos from fully charged Sanyo AA HR6 2000mAh batteries. I'm using the Sanyo Ni-MH quick charger that was sold along with the batteries. What do I need to do to get back to the 200 shots per battery set that was common when the camera was new -- about 3 years ago. Thank you for any pointers.


Unfortunately, this is not unusual with rechargeable batteries. The best thing you can do with a rechargeable battery is to fully and completely discharge it, and then recharge it fully. After that, there's nothing else you can do except buy a new ... Canon PowerShot A570 IS Digital Camera

Need a Canon powershot sx130 is service manual


... Canon PowerShot SX130 IS Digital Camera

Canon PowerShot SX130 IS error ES32 - Canon PowerShot SX130 IS Digital Camera


... Canon PowerShot SX130 IS Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2783 seconds