Having problems with your Canon PowerShot SX20 IS Digital Camera ?

Hi ,my sx20 reset all button is disabled. how can i reset my camera settings?

Answers :

Remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on.
I have a green light on my camera that flashes every once in awhile on the left side. Pressed all buttons and there is not response at all. Did not drop camera.
Repair Help & Product Troubleshooting for Canon PowerShot SX20 IS Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi ,my sx20 reset all button is disabled. how can i reset my camera settings?

Remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Canon PowerShot SX20 IS Digital Camera

SONY DSC-W100 1)I need to reset all default setting on my camera.Is there a reset button on this camera? 2)I have trouble taking pictures at a night baseball game.What is the best setting for this camera?Thats why I messed up all the setting cause I played with all the settings and I could never get a good picture all night.Thanks

It can be possible to select reset icon by selecting menu option.  \015\012it is not possible to take this type of pictures because at auto flash mode the subject can't be covered witin flash range .therefore picture may und ... Sony Cyber-shot DSC-W100 Digital Camera

Every time I turn on my Casio EX-Z75 camera it asks for the date and time and pressing the set button twice did not work nor resetting it to defaults or formatting the camera. Is there a way to hard reset the entire device to factory settings?

Here's the toll-free tech support number at Casio...they should be able to give you an answer:\0121-800-435-7732 ... Casio Exilim EXZ75 Digital Camera

My D80 suddenly stopped taking photos while I was in Auto mode. I noticed the flash stopped releasing. I've changed lenses, reset the camera's green buttons, switched out the card, reset the clock. It will occasionally take a photo, not necessarily in focus,and the flash will on occasion pop, but I can't figure out what the correct triggers are. Can anyone help? Lens is 18-135mm. Set Lens in in "A" and camera is in "AF"mode. Thanks much.

Hi, Also, try a factory reset found on page 129 of the manual. On the left side of the camera is the terminal cover, inside below the USB connector is the reset switch. If that does not work call Nikon digital 1-800-645-6689. ... Nikon D80 Digital Camera with 18-135mm Lens

Hi! I have a problem with my samsung digimax s500. My camera makes worse photos in the MANUAL Mode. They are all dark. It seems that the Exposure compensation is set at -2. The camera shows me that when i press the Shutter button lightly. But i can not reset this in the MANUAL Mode. Wich means that i get only a normal bright photo when my exposure time is set at 8 seconds. Please help me! sincerly Georg Heidfogel

... Samsung Digimax S500 Digital Camera

Sony Cyber-Shot DSC-P31 Digital Camera- the internal button battery will no longer hold a charge to remember the date settings and is apparently discharging the AA batteries by attempting recharge. I have to remove the AA batteries after using the camera each time and reset the date. Is there a way to access and replace this internal button battery?

Only with screwdriver and soldering tool :-( ... Sony Cyber-Shot DSC-P31 Digital Camera

Casio Z-750 camera: The Select/set button has stopped working. Pulled and reset the battery and card. Still won't work. Can't do a full factory reset because the Set button won't respond. Any ideas??? Thanks

I hate to be the messenger of tough news, but this is probably either a switch problem or ribbon connector. Since resetting didn't help, it's going to be, in all liklihood, a hardware problem.\015\012The problem with the switch, is that it's ... Digital Cameras

My camera is stuck in setup mode. I have tried to reset using reset button, removed aa batteries overnight, and still stuck in setup. My apple computer still recognizes the camera using usb, but cannot get it to regular modes (the round selector on top does not seem to work when changing settings)

Https://eservice.sony.com/webrma/web/index.do?SR=nav:service_support: ... Sony Cyber-Shot DSC-W1 Digital Camera

E:61:10 My camera just stopped focusing. I can take pictures but they are blurry and my screen flashes the error code E:61:10. I have tried turning it off and on, taking the battery out, changing the settings, nothing works. I can't find a reset button on the camera anywhere. Does anyone know how to resolve this problem? I have a DSC-T20 Sony Cyber Shot digital camera. An error E:61:10 came today all of a sudden. The screen is blurry and the zoom does not work. The camera has not been wet o

Thx a lot guys... The "sony smack" really works... My friend dropped the cam when he was to take a pic of me and my date at a dinner... I was scared, and didn't know what to do until I came to this site...At first it disappeared, but came back after ... Sony Cyber-shot DSC-T20 Digital Camera

Settings Is there a way to set my camera back to the original settings. My kids were playing around with it and now when I go to take a picture it is all fuzzy and distorted. I have tried in the menu but wonder if there is a reset button to do this. Thanks for the help

First check to make sure the kids fingerprints are not all over the lens. If the lens is clean, then your kids are probably not at fault. This really sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, incl ... Canon PowerShot A300 Digital Camera

When I press the shutter button to capture a picture there is a flashing hand and an exclamation mark within a box. I cannot figure out how to adjust the settings correctly. How can I reset this camera or what are the factory settings suppose to be?

If you haven't a manual get onto the Sony site and try to find one there. You might strike lucky. ... Sony Cyber-shot DSC-H50 Digital Camera

DMC-FX8 My camera is stuck at zoom-in. It basically disables everything else. Is there a way to fix it or even reset it? I tried the 'hold shoot button and power up" but that does not do anything. It does not reset it. Thank you all in advance

If the lens is jammed in the out position you can try holding the camera firmly and tapping/hitting it against your hand with the camera on. The lens should then retract. If this doesn't work or if you are afraid of dropping it (do it on your bed, ... Panasonic Lumix DMC-FX8 Digital Camera

When shooting with the D70 I get bright pink, yellow, and green in the bright areas. So far I have: -changed CF Card -changed battery -presses reset camera button -reset custom menu -checked hue and saturation settings

There may be some dust particles on your low pass filter .To check this have a fully charged battery in your camera .switch on the mirror lock up to on from the menu exit menu and press the shutter now remove the lens and inspect and blow any dust on ... Nikon Digital Cameras

I have a Canon XTi that I can't use because when I push the shutter button a 9 with a green blinking light shows up on the right hand side at the bottom of the viewing window. I've tried turning the camera off, changing the batteries, resetting the camera's settings, nothing has worked. Please help!

... Canon EOS 400D / Rebel XTi Digital Camera

I was taking photos over the weekend with my Olympus E-500 and the eyepiece viewfinder got darker than usual. I was using a promaster 5750DX flash. Even without the flash, the eyepiece viewfinder has remained dark. Also, I reset all settings to the default settings and now when the built in flash pops up, there are a series of three "beeps" and the camera tries to focus. I cannot get it to take a photo however. I also pushed the button for the sensor cleaning today. Could this have screwed u

Hi,\015\012Before doing sensor cleaning did you keep camera on bulb setting. This allows the cameras mirror to stay up until you choose to close it\015\012When you press the shutter release button it will lock the mirror up out of the way ... Digital Cameras

My Canon SX120 IS digital camera won't turn on. I used it in the morning, set it down on a table, cam back and it wouldn't work. There is no damage. When I press the power button it does NOTHING. Is there a reset button or something? Changing batteries didn't help.

If you're after a reset button there might be a little hole you can insert a pin into to reset it, look around the camera.You should also try holding down the power button for a few seconds, it might have a function where doing that does ... Canon Digital Cameras

When the camera turns on it comes to the date/time have been reset screen. I can highlight Set Date & Time and Cancel but pushing the button in doesn't do anyhting so i am stuck on this screen and can not use the camera. Any ideas on how to fix it?

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional.Use\012\012\012\012\012\ ... Kodak EasyShare Z730 Digital Camera

Focus problem My grandson just received a new Nikon camera for Christmas. He assembled the wide angle lens prior to doing any other set up. Now he can't focus it without the wide angle lens in place. The camera has auto-focus. Can you advise a fix? We tried the Reset button on the side ,but this didn't fix it. Thanks

The factory presets would not have been affected by your grandson doing as you describe. Depending on what other lenses he might be trying to use, many have a separate switch located on the barrel of the lens to turn auto focus on or off. ... Nikon D40x Digital Camera

I was going through the settings of my digital camera, when by accident i pressed the reset button and then found out that all the pictures have gone. Is they anyway i can get the pictures back? I did not press the delete button at all.

The reset button would not delete your pics. Get a card reader and use it to download your pics from the card.\012 ... Digital Cameras

I cannot turn the flash back on. When I push on the lightning bolt button nothing happens, the display shows the flash turned off. Is something wrong with the camera. I have not had it that long and just use the IA mode and I know it worked before; can I reset the camera back to factory settings? I tried all the other modes and was able to use in in C1 but then I was messing around with that and now won't work in that either. Thank you for your help.

... Panasonic Lumix DMC-FZ28 Digital Camera

My Pentax Optio A20 camera display doesn't show true colors, they now have a red-orange tint. It was dropped on the grass yesterday. When I play back the pictures, all of them show up as red-orange on the display, the ones I took before it was dropped and after it was dropped. Everything else works fine on the camera. My brother-in-law says that there may be a reset button to restore factory settings.

It sounds like you may have a broken display. It is possible that it is the main board, but much more likely that it is the LCD display. I can fix this for $40, not matter if it is the display, or the main board. Or you can send it to Pentax in A ... Pentax Optio A20 Digital Camera

Camera problems How do I reset my Sony DSC-H2 camera to the original factory settings? I've pushed so many buttons it's all screwed up.

Go to camera Menu and select Initialize, this will Reset your camera to factory default settings. ... Sony Cyber-shot DSC-H2 Digital Camera

Casio ex-z750. I have a problem with the zoom on this camera. You can zoom in, but when zooming out it activates the 'Best Shot' scene selection. If you press the zoom button again the scene selection dissapears, then the third push allows you to zoom out. I have 'reset' the camera to standard settings but htis did not help. Everything else works fine. Hopefuly you can suggest something. Thanks

Sorry Chris but that is definately an electrical issue that needs to be checked by repairs. I recommend that you send that in so they can check the internal board. ... Casio Digital Cameras

I have a Polaroid digital camera I got in May that came with a PoGo printer. It all works fine, but I've misplaced the manuals, and when I go to import photos to my Mac, I get nothing. I don't know what the correct "mode" is to import, I've never had this problem before with any camera and my Mac, usually it instantly shows as a source. Do the settings for the PoGo printer disable the Mac to connect as a source? If so, what "button" do I push to allow it to be recognized. It's a pink Polaroid, 1

Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Polaroid I533P Digital Camera

I have a Olympus X-560WP & when I turned it on, the screen appears with a P in the left corner, a red flash symbol in the right corner & it says on the bottom +1.0 1/30 F3.7. It isn't allowing me to use any of the buttons on the side or change any of the settings. I thought if I reset the camera it would fix the problem but it won't allow me to do that either. I'm on holidays at the moment & haven't seen any camera repair shops so I can't even take it there. Do you know what the problem is o

You can try to reset it by:1. Turn it off, 2. Remove battery (the big one)3. Remove the little round battery (which supply power to rom chip)4. Remove memory card.5. Leave it for 15 minutes. ... Olympus Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3765 seconds