Having problems with your Canon Rebel XT / EOS 350D Digital Camera ?

Changing that setting was aparently a BAD idea!

\015 On my Canon Rebel XT, I changed my "P" setting from Raw to L, since my computer doesn't read Raw files. I went to take a photo in the P setting and the camera shut off and started flashing ERR 99. It won't even attempt to turn on now. I hope someone can help!Thank you in advance.\015

Answers :

Hello: Try updating the firmware for the camers and software. Go to canon and download the firmware to a flash drive and connect your camera and install the latest firmware from canon.
Repair Help & Product Troubleshooting for Canon Rebel XT / EOS 350D Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Changing that setting was aparently a BAD idea!

Hello: Try updating the firmware for the camers and software. Go to canon and download the firmware to a flash drive and connect your camera and install the latest firmware from canon. ... Canon Rebel XT / EOS 350D Digital Camera

Forgets settings My optio s40 worked well until just after the warranty expired. Then it started acting up. It maintains the default settings in auto mode. It allows me to change them, but when I shut it off and power up again, it has returned to the default settings. In Pict mode, it maintains EV +1, AWB as flourescent lighting and image size as one higher than the smallest size. Again, I can change the settings, but when I shut it off and power up again, these are the settings it has. Any idea

I had the same problem. Pentax told me to format the memory inside the camera (take out the memory stick and camera will be set to camera memory). This works! (though i have to do it approx every 200pics, the problem keeps coming back!) ... Pentax Optio S40 Digital Camera

Lost functionality Camera is about a year old. Suddenly, zoom doesn't work, Set button doesn't work and Display button doesn't work. Other than that, it takes pics and displays them. But without the Set button, I can't change settings. Any ideas?

I have the same problem.. happened after leaving it uncharged for more then a year. I think its a software problem.\015\012someone know how to do hard reset/reboot? ... Casio Exilim EX-Z750 Digital Camera

Optio E10 Keeps running thru batteries, I bought a new 8 pk for a field trip with my sons school, I took 5 pictures and had to change batteries, placed in anew set and it wouldn't turn on. waited about 15 minutes and tried again, when it did start up it told me these BRAND new set of batteries I just put in was out, so in goes the 3rd pr of batteries, again telling me they are to low on charge to use. So I was out of ideas, and beliving maybe I picked up an old pk of ENERGIZERS, I waited until I

This sounds very much to me like a short circuit causing the batteries to drain so quickly. The most common cause would be moisture or water damage. Another likely cause could be a malfunction of the control circuits causing the unusual power drain. ... Pentax Optio E10 Digital Camera

Hi, my powershot S60 auto setting will only take movie images no still pic's. I've reset to manuf. settings but still no change. Any ideas whats wrong & how do I fix it?

What do you mean by "no still pics"? What exactly is happening? If the camera is showing a black or distorted screen when set to photo, and photos that are taken with the black screen also show up black or distorted, then this would likely be a CCD ... Canon PowerShot S60 Digital Camera

Hello, my dmc fz5 problem is that it don't recognize the card. I tryied to change card, etc, also to restore the factory settings, but nothing changes. I opened it and nothing seems strange inside. Sorry for bad english and thanks for the help!

... Panasonic Lumix DMC-FZ5 Digital Camera

I have a Canon Power Shot SD1000 Digital ELPH 7.1 Mega Pixels. For some reaons my pics are not downloading. The pictures show on the screeen, but the EOS Utility does not automatically come on the screen. I go to the EOS Program and open, but still nothing is happening. I have uninstalled and reinstalled but this has not made a change. I am in my 50's and not good at this! The camera is awesome and has always worked extremely well. Any ideas? Could something in the camera settings have changed.

The Best solution wud be to buy a card reader writer and transfer the pics using that ... ... Canon PowerShot SD1000 Digital Camera

Canon Powershot SD750 powers up fine; lens extends fine. The LCD is black. I can see a faint image - enough to enter the menu and change settings. Increasing brightness has no effect. Seems like the screen has gone bad. Any suggestions??

It's not the screen, but its backlight that is the problem. It's likely a poor connection of the ribbon cable in its connector socket. This problem will require either professional repair, or your opening the case to reseat the backlight ribbon cab ... Canon PowerShot SD750 / IXUS 75 Digital Camera

I have a DSC-T10 and the screen does not display any of the menu features. It is has vertical lines across the screen. I would try to initialize it using the set-up menu but can't access it. It is not under warranty and costs to much to send it in for repair...any ideas of what I could try? I did try to reset by holding down the power button for 15 seconds while battery is out but nothing changed.

Hi,There could be 2 Reasons :-1. Bad CCD Sensor 2. \015\012Bad PanelTo Differentiate, Try to Look the Saved images or the \015\012Saved Video's. If you could see them without any Problem, CCD Sensor is \015\0 ... Sony Cyber-shot DSC-T10 Digital Camera

We have sony cybershot 12.1 DSC-S2100 the screen is black when you try and take A picture like there is not enough light? We have reset setting and it is still the same change batteries any ideas? many thanks

Http://www.kb.sony.com/selfservice/documentLink.do?externalId=C265373\015\012\015\012The above link describes how to reset ... Digital Cameras

When the camera is on the screen is blank/black as if shutter is closed (it is not). i've tried changing the settings but that didn't help. any ideas what the problem could be?

CCD FAILURE !\015\012\015\012Just Call Nikon they will do it FREE OF CHARGE ! ask them about BAD CCD !\015\012\015\012it is a known manufac fault and all are doing it FREE !\015\012\015\012Pls rate me WELL ... Nikon Coolpix S1 Digital Camera

Camera works fine other than the joystick. I changed the battery to see if the battery was low and now I can't get past the time/date setting because the joystick won't respond. Any ideas?

It means that the joysctick of camera is defective., Please call Precision camera and binocular repair to send the camera for service Its for US support 1 800 665 6515 or you may call kodak 1 800 235 6325 for an alternative options and solutions., Gu ... Kodak EasyShare C663 Digital Camera

My Canon S2IS has served me perfectly for over five years. All of a sudden it is going through a set of new batteries in half an hour. A few pictures and short video clips after installing brand new Duracells I was getting the low battery warning and then a few more minutes of same it was dead, showing the change batteries message. Any ideas or is it time to retire this baby? Also, when I power up the camera, the lens makes a grinding noise while it is extending. What's up with that? Could it

Are you new batteries are NI-MH ones?\015\012Canon canon's low vote detection setting is low, and you'd better use Li-ion Canon Camera batteries. ... Canon PowerShot S2 IS Digital Camera

Everytime I take a picture with the flash on my canon SD1000 Elph there is a small amount of smoke that comes out by the flash. Also, suddenly I can't seem to change my iso settings. The camera is only 2 years old and no drops. Any ideas?

You have a short circuit in your camera...it can produce a flame. Be careful. ... Canon PowerShot SD1000 Digital Camera

Can't find settings for black and white photos. The information in the manual doesn't help as I have tried and there is no option for changing to black and white in the the 'shooting mode' menu OR in the retouch. Anyone got any other ideas???

You need to go into the REC mode (the one above menu when taking a photo). Change this to PGM and click OK. Now go into MENU, on the 3/4 page second button down should be a box with a + in the corner. This is the colour mode option. You can now chang ... Sony Cybershot DSC-T77 Digital Camera

Language problem I actually have a Kodak easy share Z1275. How do i change the language from what i think is German to English? I can't read German at all so I don't have any idea if I'm even on the right settings to do it.

I would go to menu and setup. Setup is most likely near the top but even if it isn't, keep going into the various folders until you can scroll through languages. Each language will be written in it's invidividual language (Chinese, Japanese, Englis ... Kodak EasyShare Z650 Digital Camera

Just bought a coolpix, was setting it up and pressed german instead of english for the language...now i cant find how to change it back to english and the manual is no help. any ideas??

Usually : go to setup > search for language > select : English > press OK or Set . \015\012\015\012If this doesn't work reset the camera to default settings and set it up as you would like it to be ... Digital Cameras

Incorrect Colour Photos have suddenly appeared with incorrect colours, more pinks and blues, and are grainy. Brown things look particularly bad. Outside and sunlit photos are mainly white. Video images are OK! I have set everything to Auto and EV to +0. Any ideas what is causing this?

Processor problem - Return the Vendor or Manufacturer for repair or repacement ... Polaroid PhotoMax PDC 3370 Digital Camera

I have a Sony Cyber-shot DSC-W90. When I try to change the flash settings, a notification pops up on the screen saying, "Flash settings cannot be changed." I tried setting it in each mode (including Auto) and trying to change the flash from there, but it won't let me. How do you unlock the flash settings? Thank you.

Go to Menu/ Home and initialize camera to reset it for factory default settings to fix flash light settings bug.If problem still not solved, let me know do you see any error code flashing in top right corner of lcd? ... Sony Cyber-shot DSC-W90 Digital Camera

How do I change pixel settings on olympus SP550UZ canera? We've had this camera for several years and managed to lower the resolution when we first bought it. Now we'd like to increase the pixel setting permanently, but can only manage to change the setting on a 'one by one' photo basis. The manual provides information about the different settings, but not how to make the changes.

Here is the manual with lots of details. It will answer you question: Free download to.http://www.olympusamerica.com/cpg_section/cpg_support_manuals.asp?id=1289 ... Olympus SP-550 UZ Digital Camera

Sony Cybershot DSC-H7 - can not change flash settings

For anyone who wants to know how i solved my problem with the flash saying it cannot be changed...\015\012\015\012If you go into the c ... Sony Cyber-Shot DSC-H1 Digital Camera

Shutter speed I have a cannon a410 power shot. when i take pictures it takes about 10 seconds for me to be able to take another picture. this problem just started recently. I must have changed a setting and I am not sure what setting it is to change it back. can you please help me change the setting back so I can take pictures faster. thanks

If there is a factory reset option it the settings try pressing that. Remember to back up anything on the camera (eg. photos). ... Canon PowerShot A410 Digital Camera

Kodak Z650 mode button not changing settings

Don't ever open the cam its very difficult to close it !!he he...(i have experience)so just take it to the nearest service center and get its switch changed ! ... Kodak EasyShare Z650 Digital Camera

The flash on my Nikon D3000 won't pop up (regardless of the setting) and when I go into "Shoot" (from the guide menue) and then into "Easy Operation" the camera is set at No Flash but I'm not given the option to change the setting and says "The camera is now on "Auto No Flash Mode" but doesn't give me an option to change the setting there either. Can you help?

... Nikon D3000 Digital Camera

I have the G9 it's 3 years old. On the weekend for the first time I went to spin the wheel to change my scan setting from flora to mountain and it wouldn't change the setting. I tried to use the mannual appeture by using the wheel and it didn't do anything. So it seems the wheel doesn't work anymore. I use it all the time for underwater settings in the housing. Now I can't use it at all underwater. because I can't get it onto the underwater setting using the wheel. What is wrong can the wheel b

... Canon PowerShot G9 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1045 seconds