Having problems with your Canon Rebel XT / EOS 350D Digital Camera ?

Custom functions option missing from menu

\015 I don't have the custom functions option on my Rebel XT? On the menu it just shows Language, Video, Communication then Clear Settings. The custom functions option is missing. I've checked that I'm in the correct mode (M, AV, TV) but it never appears!\015

Answers :

And u had this menu option before and it is listed in the user operation manual?
Are you certain you are looking in the Right most utility menu?

6d17eec.jpg

It sounds like you are already in the creative zone mode of M AV or TV.
Repair Help & Product Troubleshooting for Canon Rebel XT / EOS 350D Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Custom functions option missing from menu


And u had this menu option before and it is listed in the user operation manual? ... Canon Rebel XT / EOS 350D Digital Camera

Reset option and clean sensor option are not visible in set up menu. Canon D20 I had a two spots that kept appearing in the same area of the photo so I looked at the manual and did the clean sensor function a couple of times and the spots remain. I had also done a reset all functions since my stepson gave me the camera and I wanted to restore it to its original settings. Now I don't see either the clean sensor option or the reset in the set up menu. Help!


First of all - great camera! Check out http://www.dpreview.com/reviews/canoneos20d/ for a lot more information on the functionality. The sensor clean functio ... Canon Digital Cameras

Canon SD900 selection options not responsive. The selector wheel, Function Set button and menu selector only work from time to time. Even if pressing the ring brings up info to the LCD, nothing can be changed because the Function Button and the Menu button are not active. This is a random problem. Sometime, I can bring all functions back to life by removing and re-inserting the battery and restarting.


Sounds like the board has become damp and possibly corroded in certain parts this causing the random effect with the buttons their isnt much you can do unless you can remove the case yourself and give it a good clean but doing this is extremely diffi ... Digital Cameras

Camera does not have a memory card. No pictures exist, but I get MEMORY FULL message as soon as camera is turned on. When I go to the menu and go to MEMORY, the option ALL ERASE shows but I cannot get to it -- pressing the 'go to the right' function on the main menu button does nothing. Connecting the camera to the computer, I see that there are no contents in the folder(s). Have had the camera for 3-4 years, never had a memory card, would hold 4-6 photos in memory of camera before this. Ba


This can be a problem with the memory card, we can try here first something like formatting the memory card via the camera Menu. You also mention that you can access the memory card when connected to the computer you can also format it from there. ... Olympus Stylus 600 Digital Camera

Date stamp I try to highlight the date stamp option in the startup menu but it skips right over the option. How do I get the date stamp to function?


In order to use the date stamp option, the image size (L, M1, M2, M3, S, Postcard) has to be set to Postcard. Press the Func/Set button, scroll down to the image size icon (lower left corner), then scroll over to Postcard, and press the Func/Set butt ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

In custom setting, assigned the front function button to display framing grid. function button does not respond when pressed. am i missing something here? thanks


Aha! While pressing the fn button, turn the main command dial (the one on the back) to toggle the grid display.Personally, I like having the grid, and used custom setting #D2 to turn it on the first day I had the D90. This frees the fn bu ... Nikon D90 Digital Camera with 18-200mm lens

Canon Powershot S1 IS has blurred image on both flip display and internal display (identical); menu graphics display fine, menu functionality (changing options) diplays and works fine.


Your Canon S1 IS has problem of CCD Imager Sensor and need to be replaced.Canon has announced free of cost repair scheme for such problem in S1 IS model.Click ... Digital Cameras

In the CUSTOM SETTING MENU, when I scroll down to 22 BUILT-IN FLASH, and press the OK button on the camera I get a message "this option is not available with current settings". How to I make this option available.


Switch out of the point&shoot modes to one of the PSAM modes by turning the mode dial on the top left of the camera. ... Nikon D80 Digital Camera with 18-135mm Lens

I have a new Cannon EOS 40D the monitor works, all menu options work and I can preview all pictures taken, however the focusing screen will not come on. I am new to digital photography. I am not sure if I am missing something c and am sticamera operations or if there is a defect with the camera. Any tips will be appreciated. Bill


Camera is only a few months old and has been used very little. \015\012It worked fine until card was filled. Put in new card and the screen comes up to reformat but it wont format and says get new card. Put in the one that was just used and ... Canon EOS 40D Digital Camera

I dropped my Canon Powershot SD750 digital camera and the extended lens was stuck open. I had no other options so I opened the camera up to fix it. I corrected it, but after I put the camera back together it takes poor pics. In normal light conditions it over exposes and pic looks really bright and also has many lines going through the picture? I love the camera and don't want to buy another one. I tried a different memory card and reset function under the menu.


Hi.You have damaged either the lens or the CCD sensor , located behind the lens, inside the camera.The camera must be taken apart by a technician to fix the problem.to get a quote on repair, try contacting Canon at ... Canon PowerShot SD750 / IXUS 75 Digital Camera

I took a bunch of pictures with my coolpix, but them realized the memory card was out. Another post said check the menu option for the copy function, but I don't see one. I just need to move them to the card. Help!


Make sure you put the memory card back in...otherwise, the copy function doesn't work. ... Nikon Coolpix 2000 Digital Camera

Can't get a picture on the screen - just shows black. When we turn the camera on the LCD screen displays the function choices and menu options, but will not display any image. If we take a picture using the view finder and then check for the image, nothing is displayed. We just checked the memory card, and it doesn't even take a photo. All we got was black. Any suggestions?


Check the SD card, they have sliders on them which lets you "lock" the card so nothing can be put on or taken off of it. Make sure that is off. Then go through the menu on the camera and try to format the card again. If the card is bad it should give ... Canon Powershot A1000IS 10MP Digital Camera with 4x Optical Image Stabilized Zoom

I have a canon powershot SD200 digital elph camera. The metal piece on the back of the camera which moves the camera between functions (view photos to shoot video to take photo) no longer works properly all the time. Also, the clicker wheel that moves through different menu options or moves through photos being viewed doesn't always work. Are these problems repairable, and if so, where/how/at what approximate cost?


Hi,\012You will have to refer the servicing to a Canon Authorised service center near you. They will provide you with an estimate of the total repairing charges which depends on the extent of damage to the internal parts and the number of ... Digital Cameras

I bought a camera from a friend, Olympus e-420. but when i started to use it, i always got dark picture even the flash is already switched on. i'm thinking the built-in flash is delayed, do i have way to make it more accurate? i also noticed when i take pictures it always save's as ORF file. how can i change this settings to a different format? i already tried restoring the default settings but why can't i access the Custom Reset option on the menu bar?


There are multiple reazons for the picture to look dark, a very short exposure, or a low flash intensity.\015\012Try changing the flash intensity, this is done by pressing the Exposure compensation and flash button simultaneously.\015\012 ... Olympus E-420 Digital Camera

Turn on camera and screen lights up with an image that seems permanent. Can't get into the menue or anything else. The zoom and picture taking button work but the viewing screen will not change from what looks like an image burned into the viewing screen. I can hear all the normal functions but no change occurs on the screen when trying the differnt options for the camera. Please help. My camera is Power Shot SD400 Digital ElPH. Sincerely


Hi,Please replace the battery to solve this issue. ... Canon Digital Cameras

Camera will power on lens works but the screen won't show any image but still shows menu options etc. but no pictures. I got an E18 once but the lens seems normal. The camera seems to function normally but won't record pictures.The cf card is in normally also.


Test ... Canon PowerShot A75 Digital Camera

Hi, I recently purchased a D2Xs floor model or demo unit form a liquidation company here is Kansas City. The problem is that I have no menu options and the only thing that comes up when I access the menu on the camera is a small setup menu with about 6-7 options, none of which include a reset or any additional features. This renders the camera practically useless as most of my dials will not work because they need to be directed by the firmware. How can I reinstall the original version 1.0 firmw


... Nikon D2Xs (Body Only) Digital Camera

Calibration? I can't access the menu in my camera. It doesn't recognize when I click on menu, and there are some options I click not above it, but in another place on the screen and it activates that option. I think I need to calibrate it, but I can not access the menu to do so...


What are you exactly trying to access or get to that one part of the screen will let you get to that option and another isnt? ... Sony Cyber-shot DSC-T50 Digital Camera

CAM YOU HAVE TO FORMAT THE CARD. HERE'S SOME STEPS TO FORMAT THE CARD: In Playback mode, select the image you want to delete, then press OK to display the Playback menu. Select the Delete option and press OK. In the Delete sub-menu, use the buttons to highlight the option you want, and then press OK.These options include: Format Memory (Card)?Deletes all of the images, video clips, and files from internal memory or the memory card, and then formats the internal memory or memory card. A sc


Great! Thanks.. ... HP Photosmart M425 Digital Camera

I have a problem with the Canon Powershot 850 IS. Most of the functions on the camera (Zoom, menu, display, menu and function set) are frozen and all I can use is the image capture button and the scroll wheel on the upper right hand side. Can you please provide me with a solution to this problem? Thanks, Robert


The issue here is the micro circuit board inside the camera overheats, from what i read canon is aware of this flaw and has repaired free of charge. But you do need to ether take it to a authorized canon shop or return it t ... Canon PowerShot SD850 IS Digital Camera

When I try and connect my camera to computer using the usb cable it shows a screen which says 'usb mode connecting.... Switch on [menu]. I go to menu and have 3 options auto mass storage and pictbridge. I have tried all of these options but no joy. Most strange as problem has only just started and have downloaded loads of photos previously.


Consider NOT using the USB connection.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or ... Sony Cyber-shot DSC-T70 Digital Camera

D2xs has no menu options, just a menu option with the wrench icon, firmware version says 7.30 and 7.31 cant reset anything on the camera need to know if the problem can b fixed


... Nikon D2Xs (Body Only) Digital Camera

When turning on my Panasonic Hx-DC1 camcorder there is no Menu. Pressing the 'Menu' button does not display the menu options.


It's likely the ribbon cable on the main board is dislodge, you need to take the whole unit apart, if your carefull its not to bad to disassemble, you need to take out the side panel, under the power board, the one with a big black capacitor, you nee ... Digital Cameras

Menu options for Canon E0S 40D have changed


Make sure that you didn't dislodge the memory card when you put in the battery.\015\012\015\012Note that you can get a memory card reader to read the contents of the flash card directly on your computer.\015\012\015\012If the 40D is like ... Canon EOS 40D Digital Camera

The function button on my d40x i think is sticking because when i turn my camera on the self timer keeps flashing and when i try to access the menu or any other functions like playback it wont allow me the only thing i can think is that the function button by the lens is sticking hints the reason it is flashing and wont stop is there a way to fix this?


Since you can't get into the menu, let's try a manual reset. Remove the card and the battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Nikon D40x Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0870 seconds