Having problems with your Canon Rebel XT / EOS 350D Digital Camera ?

Factory defaults How do i set my camera back to factory defaults?


Answers :

Hi,

Here is the manual for that camera. Look on page 35 for instructions on how to clear all settings >>>>>>>>>>>>>>







http://www.cleaningdigitalcameras.com/pdf/EOSDRXT350DIM-EN.pdf







Regards.
Repair Help & Product Troubleshooting for Canon Rebel XT / EOS 350D Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My camera deletes the photos taken everytime I turn the camera off. I have all the settings set back to the factory defaults, but it still deletes them. Help


Are you sure they're deleted? Have you tried downloading them using a separate card reader to your computer? ... General Electric A835 Digital Camera

Factory defaults How do i set my camera back to factory defaults?


Http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&tabact=Dow ... Canon Rebel XT / EOS 350D Digital Camera

When I take a picture with the flash the picture actually turns out so dark you can not view it. Is there a hard reset to set the camera back to factory default


Google it to find out. Also check Canon's website to find out if there is a firmware flash/update for you camera. Usually those reprogram updates fixes most most problems. Good luck. ... Canon PowerShot A640 Digital Camera

I have the Bushnell Trail Sentry 11-9302 game camera, 2.1 MP. I went in and entered the password, changed all the settings then powered it down. Turned it back on and now my password doesn't work? How do I reset the cameras password to the default password so I can get back into the setting so I can use the camera?


... Bushnell Digital Cameras

Acer how to fix acer iconia a501 tablet camera focus. It can ONLY take close up photos clearly up to about 10cm. Beyond this any all photos taken are extremely blurred as if the camera is out of focus.I tried resetting the camera properties to default factory setting but this did not help.I downloaded another camera app and this too was useless.How can I set it so that all shots are on infinity focus and not just set to macro shots.CheersJoseph


... Digital Cameras

Every picture i take is blurry. I've tried changing all the settings and going back to factory settings but nothing works. I've also tried all the different camera modes in all the proper times and none work properly. I took 25 pics at party with the party setting and night portrait and candle light setting and they all truned out extremely blurry. i dont know what to do except send it back


... Panasonic Lumix DMC-ZS3 Digital Camera

I think i have set something wrong on my camera and i would like to know if there is a way to set it back to factory settings versus going thru each option individually. The pictures are darker than i like even when using the flash. And outside pictures do not have the illustrious color they used to have. My camera is a fuji s5100. Thank you.


Go into the menu and find "reset"...follow the on-screen instructions. ... Digital Cameras

When i turn on the camera, it always asks me to set time and date. If i click on yes, then i have to enter all the details as to the date, time, place. Also, the MP size defaults to 14MP instead of the previous setting, for e.g., if i had previously set it to 5MP, it would go back to 14MP after I turn the camera off and on.


Well, I have the same problem. Just introduce once the date and time. Turn off the camera. then turn the camera on using the button for presentation of pics (right arrow). You will see the last picture taken. Press again and you will be in shoot mode ... Nikon COOLPIX S710 Digital Camera

I'd like to set my Stylus 790SW back to default settings in hopes that my video feature will work. Right now the video doesn't record. It's just a picture. I've been messing with this camera for 4 hours and cant get this thing back to original settings. Is there a magic trick? If I send this to Olympus to be looked at, it will be it's 3rd trip since to the New York repair shope since I bought it 2 years ago.


Roll the dial to picture mode, press the menu button and you will see "reset" on the left. Select "Reset" and say "Yes" - this will reset your camera to default settings. \015\012\015\012Here's a link to the manual if you need more help:\015\01 ... Olympus Stylus 790SW Digital Camera

Shutter speed on the auto mode of my s1000 camera seems slow. how can it be increased in the auto mode? This is a Fuji camera and by the time I press the shutter button subjects have moved. I have set the camera back to the original factory settings and I can adjust the shutter speed in the manual position but in auto it seems really slow.


You need to press the shutter button half-way and allow the camera to lock in the focus before you press the rest of the way. This eliminates "shutter lag". ... Fuji FinePix S1000FD Digital Camera

I can take digital photos that are on the sd card but I am not able to get my pc to download or reconise the Canon Powershot. I can not download photos! It used to go into download mode as soon as I plugged the camera inot the pc by using the digital port on back of camera and usb port on pc. What can I do. I have reset the camera setting back to factory with no success. I have Windows xp.


Consider NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to ... Canon PowerShot S1 IS Digital Camera

FujiFilm S5500 When I turn on camera all my settings are gone, presumably defaulted to factory setting. I guess the camera's internal battery is flat or otherwise dead. can I replace same, what is it. I have all manner of soldering irons, and drivers etc to fit almost anything with a screw. I appreciate it could be a ticklish job, but have spent years as an elec engineer with Fisons Scientific, so shouldn't be a problem. regards, chris catton


I'm sorry for the difficulties you're experiencing in using the Camera. According to the information available from the manufacturer, it appears that there is no such battery available to keep the date and time and other settings. Hence it is ... Digital Cameras

Every time I turn on my Casio EX-Z75 camera it asks for the date and time and pressing the set button twice did not work nor resetting it to defaults or formatting the camera. Is there a way to hard reset the entire device to factory settings?


Here's the toll-free tech support number at Casio...they should be able to give you an answer:\0121-800-435-7732 ... Casio Exilim EXZ75 Digital Camera

I cannot turn the flash back on. When I push on the lightning bolt button nothing happens, the display shows the flash turned off. Is something wrong with the camera. I have not had it that long and just use the IA mode and I know it worked before; can I reset the camera back to factory settings? I tried all the other modes and was able to use in in C1 but then I was messing around with that and now won't work in that either. Thank you for your help.


... Panasonic Lumix DMC-FZ28 Digital Camera

I bought my camera today from ebay and I do not have a battery to switch it on and check. I attached my 18-135 mm lens to the camera. I tried to look through the viewfinder and I cant see a thing. Everything from the viewfinder looks grayish and blurry. I do not have battery right now to check the camera when it's on and neither I can restore the camera to its default factory settings. Can you please tell me if there is something wrong with the camera or if it's a usual thing for Nikon D80 and a


Hi.Re: "Everything from the viewfinder looks grayish and blurry."Ensure that the problem is not the CCD sensor. A faulty CCD sensor will tipically return a grayish or purple-toned blurred image. Kind of shadows-like. If you ha ... Nikon D80 Digital Camera with 18-135mm Lens

Settings memory Whenever I change the batteries, the system settings revert back to their default settings. I'm assuming that there must be a small battery somewhere in the camera. Do you know what disassembly procedure I must follow to get to that battery?


There is no other battery for your settings, as indicated by the manual if you leave your camera for more then 1 hour without batteries (or dead batteries) you will loose all you settings.\015\012\015\012Unfortunately is the way this came ... Olympus Camedia C-750 Ultra Zoom Digital Camera

Dark Images At some point, the images from the camera became very dark in automatic mode. Previous to that, the images were perfect. I have checked all settings many times and changed back to default settings. Nothing has seemed to work other than to change mode to "P" and set for extra exposure. Thanks.


Even in automatic mode, camera still lets you pick what ISO to use. If ISO-Auto is OFF in camera menus, this can give some dark images. Press and hold ISO button and rotate command dial to give a higher ISO, or turn ISO-Auto on in camera menu with cr ... Nikon D40x Digital Camera

I don't understand how to set my new Olympus Pen EPL1 camera on largest size jpeg's without using the RAW setting. What does LF, LN, MN and SN stand for please??? And does one change back to factory settings? Many thanks.


... Digital Cameras

My sd700 is auto-metering light incorrectly and the pictures come out too dark. Sometimes simply re-framing/re-focusing the shot will make it work correctly, but not usually. Is it broken? Have I set something incorrectly? Is there a way to re-set the camera back to all its original default settings?


I have the same problem. Sometimes the camera works fine but sometimes it measures the light not correctly, or something like that. I'm not sure if it's only that it needs a cleaning inside, because when the light measuring fails the camera makes a d ... Canon PowerShot SD700 IS Digital ELPH / IXUS 800 Digital Camera

I am trying to get my camera back to the factory settings but everytime i go menucardset then go tocustom reset setting it jumps over it and goes straight to picture mode. I cannot get it to highlight custom reset setting.


There may be another "reset" in the menu that will do what you want. Search for it. ... Olympus EVOLT E-500 Digital Camera

I have a bushnell 119512B digital land camera. i cannot set the date, i have set the other 4 but it keeps going back to default on the date


... Bushnell 119455c Digital Camera

I want to set my Samsung s73 camera back to the factory settings.


You Can Change The Size Of The Picture By Clicking The +/- Button And There You Can Select The Size Used In The Memory For The Picture But You Cannot Change The MegaPixels Used Becase MegaPixels Just Mean The Quality Of The Picture ... Samsung Digimax S73 Digital Camera

I have a canon rebel xsi dslr camera. All of the sudden when I try to take a picture it says that the card is write protected. I have even gone and bought a new card but it still says write protected. Can't fomat card because it says write protected. I don't know how to set to factory default settings? What should I do?


Have you checked the slide switch on the side of the cards? Should be "unlocked". ... Digital Cameras

The viewfinder of my Nikon D80 is grayish and blurry when it's off. I cant see a thing when I tried to use my 18-135 mm lens. I don't have a battery to reset it to its factory default settings. Do you think there's something wrong with the camera or the viewfinder is always blurry and grayish when it's off. I have owned D40 earlier and I could play around with the viewfinder even when the camera was off.


Hi,\015\012There is chance that your settings are just off . Set your settings to AUTO and then try again to view in viewfinder .If you sre still unlucky then there is some problem in camera ,You need to take to service center to get it service ... Nikon Digital Cameras

Rotated image When I take a picture with the camera level the image appears correctly in the screen but when I review it or try to down load the image is is rotated 90 degrees. I have removed the batteries to no aval then set both menus to factory default settings all to no avail. I cannot find the solution in the book. Help me Please lance


The auto-rotate sensor is probably faulty. Believe it's located near the base of the A95's swivel LCD, and goes bad with time from the repeated opening and closing of the LCD. But it's really not worth the effort to try to fix, as most good free pho ... Canon PowerShot A95 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3827 seconds