Having problems with your Canon Rebel XT / EOS 350D Digital Camera ?

How do I change the setting to manual on a canon to connect to studio lights

Answers :

Rotate Selector mode dial to 'M'. That is the manual mode.
Repair Help & Product Troubleshooting for Canon Rebel XT / EOS 350D Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I change the setting to manual on a canon to connect to studio lights

Rotate Selector mode dial to 'M'. That is the manual mode. ... Canon Rebel XT / EOS 350D Digital Camera

I have the Canon Powershot SD1200 IS. the functions: Disp., Menu, Func. Set do not work. nothing happens when i press them. When I hit the play button it keeps going through all my photos very quickly. and the 2nd green light blinks quickly. Not one by one manually. It doesnt matter if the camera is on auto or camera. nothing works. On the digital screen on the botton left there is a symbol of a rounded triangle with an S and bottom right there is 9999 when i change it to manual on the upper lef

Try this...remove the card and battery...press all the buttons...leave it alone for 20 minutes...insert the card and then the battery...turn it on. ... Canon PowerShot SD1200 IS / Digital IXUS 95 IS Digital Camera

I'm not getting crisp, in-focus photos from my EV500 (they appear somewhat fuzzy). In a studio environment with 5500K softbox lighting, using a tripod and AF on a portrait subject, with ISO 125 in Manual and Portrait exposure. I also shot the same subject with a Cannon G10 and same settings. My Cannon photos were tack sharp, but my Olympus photos were not. Also, the Cannon colors were more realistic than the Olympus. The colors on the Canon appeared as they should using the daylight (5500K

You can try a few things to see if they help\015\012\015\012First is to power off the camera and detach and reattach the lens just to make sure you are getting a good connection for the auto-focus\01 ... Olympus EVOLT E-500 Digital Camera

Focus Problem Dear folks, I just bought a (new) Canon A75, and it doesn't seem to focus. At all. Even on manual focus, not only can I not get it to focus properly, the focus doesn't change at all. When on AF, it doesn't beep like the manual says it should, and the yellow light blinks, as it's supposed to when there's a focus issue. The focus assist light is working. Can anybody think of anything I should try? The manual is of no help. This is my first digital camera, so I'm not ruling out the po

I'm not sure on the problem, but one thing to check on the front of the A75 it also uses an IR beam to set focus. It's a little circular dot under the flash on the right side. It will light up red when in use to project the IR beam. Make sure you ... Canon PowerShot A75 Digital Camera

I have a Samsung PL100 (Dualview). I'm having trouble uploading my photos to my computer using the USB. I have installed the CD that came with the camera (InteliStudio) and when I connect the camera and computer with the USB cord, the red indicator light lights up. However, nothing else happens. The User's Manual says that it should automatically connect and the computer should be able to recognize it. It doesn't. I have tried different settings in the Menu and still nothing happens. Please help

I find that alot of times using the camera to unload your pictures to your computer is more trouble them you need to worry about. i say you just pull out the SD or SDHC card and plug that into you computer. if you dont have an SD or SDHC card reader ... Samsung DualView TL205 / PL100 Digital Camera

I have a canon power shot SD600 (around 3 years old now). When I go to download my photos on the computer it tells me (the computer) that it 'can not detect a camera connection' and to check the connection. The connection is definitely in properly but the connection button on the camera does not light up in blue (as it usually does). The battery is fully charged and can not find anything in the manuals provided regarding this failure. cheers, Maura

... Digital Cameras

Concert settings Hi, I am going to a concert, can you tell me the best settings to have the camera on, when I have it on iA if the subject moves then the picture is blurry, as there will lots of movement I obviously need to change this, also when I used it at my son's school in low light the pictures came out dark. Would it be best for me to do manual settings, if so which one? Thanks Julie

Hey Osfan,\015\012 I will start by saying concert photographs are some of the hardest images to capture successfully. The first thing you probably should do is set the iso to the highest setting possible which on this ... Panasonic Lumix DMC-FZ18K Digital Camera

Very poor definition on unsharpened converted raw files to tif format,on my Canon 1DS MKII through Image browser.A number of tests have been carried out under controlled conditions.Both location and studio at an ISO of 100,using a tripod and various Canon L series optics.The results when looking at 100% magnification are poor in both manual and auto focus modes,as indeed are the images when printed out at A3.All the files have been shot without any post sharpening this has been set at zero on t

Hi mike,I would like you to visit this site that i hope will be helpful.www.dphotojournal.com/canon-ef-24-105mm-f4l-is-usm/ ... Canon Digital Cameras

Hi, I've just bought a canon eos 40d, but in portrait mode under studio lighting , as well as natural light, people are the wrong skin tone. I've tried various settings in the control menu, ie: colour saturation. Any ideas?

Check in-door and out-door white balance adjustment option in camera menu. ... Digital Cameras

On the Canon G3 I have issues with the main dial on the handgrip (used for aperture shutter speed and manual focus) while in Manual mode. it will change settings only some of the time! is this usually due to dust in the area and can it be cleaned or otherwise made operational?

Thanx for nothing if and when I fix the problem with the G3 I will likely not tell you so that you can charge $9.99 to the next person to ask the same question. This is the kind of scam that I expected and the likelyhood of hearing back f ... Digital Cameras

My canon powershot s45 works fine , until i plug it into my computer. then it wont even power up . its not my ports or cords i checked them. i dont have the manual & i think that a setting was changed or something . what settings do i need it on to transfer my pics to my comp?

When connected to the PC the cameras display will blank out, this is normal. If the cameras "Communication" setting is set to "Normal" you can only download images when the cameras drivers have been installed of the bundled CD. If you change it to "P ... Canon PowerShot S45 Digital Camera

I have a Canon sd630.The camera works great except that it won't remember its settings. Upon turning on the camera,it would say it's in manual mode, but if I change it to automatic and then turn it off. It would be back in manual mode again. I have reset the camera and even taken apart to replaced the internal battery. Still no luck. Appreciate any help. f.y.i I have tried looking for a firmware update, but no luck either. I was wondering if I could flash my camera with the sd500 firmware? I ju

Try to follow the route up the circuit from the battery on the motherboard.\015\012maybe the battery is ok but the power not rich to the mother board or memory chip.\015\012take more attention on the connectors. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

Bright pictures I have had my Sony Cyber Shot (DSC-S650) for about 6 mo. I have tried all different settings for the flash but almost all of my pictures come out with the person very white and bright. The pictures are fine if taken outside in natural light but anything other than that and my pictures are very white and bright. I have even tried to turn the flash all the way down on the manual setting. This is the third Sony Cybershot camera that I have owned and have never needed to change any o

Hey JAKI-LYNN,\015\012 I would reset the camera to the factory default settings in case something got set wrong. You can reset the camera in the setup menu and it is called initializing the camera. I would then set th ... Sony Cybershot S650 Digital Camera

Write Protect I own an olympus Camedia D-390 and use an xd picture card (16mb) recently I tried to take a picture but when I slid back the cover it comes up with the error message "Write Protect" I have looked in the manual and all it says it that my cameras write protect feature has been enabled by a pc; connect it to a pc and turn this off. Just one problem....How??? I have trid connecting it tothe pc and changing the attributes of the folders;but everytime I take off the "read only setting

What should i do? would u mine pls to teach me sir? ... Olympus Camedia D-390 Digital Camera

Help :) Can someone please tell me how to change the dpi setting on my camera {it needs to be set on 300dpi}.....I can't find my manual and I'm taking pics for a magazine. Thanks! My camera is a Canon Pwershot sx100 Tiffany

Hey TiffanyJane,\015\012 There is no way to change the dpi on a digital camera. What you need to do is set the camera to its highest resolution which is 3264x2448 pixels, and this is referred to as large in your camer ... Canon PowerShot SX100 IS Digital Camera

I own Canon S3 IS digital PowerShot camera. I have taken many pictures, but wanted to make some adjustments to some of the manual settings, as I am getting more comfortable with the camera, and would like to try pictures without using the AUTO mode. I made some adjustments to the picture size (compresion) and pixels.I do not remember making any more changing, but I read the User Guide a lot, and learned where adjustments can be made in the maual mode. I decided to look at some of my latest pictu

Did you "format" as part of changing your settings? Format reformats the disk - it has nothing to do with the format of the image files. If you formatted the disk, you will have to use image recovery software to restore the files. If this is the c ... Digital Cameras

How do I change the manual setting to auto - Canon Rebel XT / EOS 350D Digital Camera

Exactly! ... Canon Rebel XT / EOS 350D Digital Camera

I have a canon powershot sx110is and when i turn it on it will not take any pictures but instead gives the message "memory card error." When I put it to the display mode it says the same message plus "memory card locked." I checked the Sd card and it isn't manually locked. I don't know what to do and I don't think I did anything to change the settings. Help!?

First see if the camera will work without the memory card installed. Then format the internal memory using the camera's setting as described in the manual.Then turn OFF the camera and insert the sd card. Turn on and reformat the card too. ... Canon Powershot SX110 IS Digital Camera 9.0MP

Black screen i own a canon digital IXUS 800 IS and when i turn it on to auto or manual the screen is black with the icons white as normal and photos turn out black-tried pressing disp. button which worked for a while but now it just turns the icons off - tried resetting to factory settings and no change i help - please - dennis mannina - london

If your camera is still under warranty, the best thing you can dois to take it to the nearest official repair shop and Canon Digital Cameras shouldfix it for free.If your camera is out of warranty, or if Canon refuses to rep ... Canon PowerShot SD700 IS Digital ELPH / IXUS 800 Digital Camera

Magenta cast For many months now I have been shooting products and artwork with a Canon 10D and 2 white lighting strobes with larg silver lined soft boxes.The problem I'm having is with a magenta color cast over the entire picture especially if I shoot red subject material.I have tried vast changes in parameters and white balance and nothing I do with camera settings seems to help, I must always resort to post processing in PHOTOSHOP CS. Could this be a 10D issue or ME?

Mostly it is probably you.\015\012\015\0121.) Use a Gretag-Macbeth Mini Color Checker in the first frame of your lighting set up (every time you change anything about your setup: move the lights ,change the softboxes, lower or raise the power setting ... Canon EOS-10D Digital Camera

How to change canon ixus 30 picture resolution. We've lost the manual, and can't understand the settings...! pic res currently is about 100kb in size. Help!

... Canon PowerShot SD200 / IXUS 30 Digital Camera

Nikon coolpix 7500 white balance desn't stay calibrated on auto every pic has a blue cast unless I set manually for each change in lighting

... Nikon Digital Cameras

Exposure problem I have just purchased a Canon 40D. When shooting in Manual mode with an external flash, (photogenic) my exposure always looks correct thru the lcd but it always flashes -2 no matter what setting I have the camera on. What am I missing? I am relying on the camera's reading as my light meter is broken.

Your 40D requires that you use an ETTL-II type flash like the Canon 380-EX. What flash are you using? ... Canon EOS 40D Digital Camera

I lost Canon Rebel XTi instruction book. I don't remember how to change settings on camera-like ISO, aperture, shutter speed, etc. I am just learning so I need to figure out how to print a manual or view on online.

Hi,Please download all necessary User Manuals from Canon Support f ... Canon Digital Cameras

I recently purchased the Nikon D300, have read through the manual, and still can't figure out how to change the settings so that it's taking the same picture constantly. (same subject, lighting, etc., the camera will shoot at 5 different shutter speeds). Thank you!

Go to the custom settings menu, then section "e"..number 5, auto bracketing set, choose AE only.\015\012\015\012Then go to F4...assign func button, for func buttons + dials...choose Auto bracketing.\015\012\015\012Then when ac ... Nikon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4521 seconds