Having problems with your Canon Rebel XT / EOS 350D Digital Camera ?

Om my display is the camera saying: lens error restart camera I put on my camera and now i cant get my lens get in and every time i set on the camera it is saying lens error restart camera. I have also loaded my battery. my mailadress


Answers :

Fixing a Lens Error on a Digital Camera
\012
\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Canon Rebel XT / EOS 350D Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Om my display is the camera saying: lens error restart camera I put on my camera and now i cant get my lens get in and every time i set on the camera it is saying lens error restart camera. I have also loaded my battery. my mailadress


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon Rebel XT / EOS 350D Digital Camera

Canon A560 My friend loves this camera and i being foolish and drunk try 2 get a photo and it gets knocked out my hands. it hit the ground, but not 2 hard, and now says 'lens error, restart camera.' Looking on the internet this camera's a load of rubbish as it happens all the time but im a broke student and am guna av 2 buy her another 1 so has ne1 got any new...(cheap!) tips? i feel awful!


When it was dropped the gears in the lens assmbly were jammed if you can open the case to get to the assembly it's not to hard to fix you should see the gear that jammed and be able to fix it with a small screw driver ... Canon PowerShot A550 Digital Camera

Lens error My zoom will not work. I can take pictures if I don't zoom, but as soon as I try to zoom in, the screen goes black, the camera beeps a few times and a message that says "lens error, restart camera". However, upon restarting the camera, nothing changes - it still won't zoom!. Also, when turning on the camera, when the lens first comes out...it sounds funny, like it is puttering. Help?


Powershot S3 IS: lens error message, lens juddering on startup but not \015\012coming out. Tried all tricks on internet without success, so decided to \015\012dismantle camera. Localised fault to optical position encoder on first \015\012transfer gea ... Canon PowerShot S3 IS Digital Camera

My Canon PowerShot SD850 IS has a lens that is stuck in the extended position. I get a screen that says lens error, restart camera, but when I try to connect to the software, I get a screen on the computer telling me the computer cannot detect the camera. Battery is freshly charged, and I get the little yellow bird picture on the camera when I turn it on. It beeps about 4 times, and then turns off. Is there a safe way to get the lens to retract?


Don't play around with that lens, you can do more damage to the camera and focus with some of the stuff people tell you to try. Your camera just needs to be serviced and you'll be working great again. The shop that specializes in service for the powe ... Canon PowerShot SD850 IS Digital Camera

My lens on my Canon IXUS 105 is stuck open and when I push the on/off button I get an error message which says: Lens Error Will shut down automatically Restart camera I can't view pictures, I can't press any of the buttons... I'm not sure where the restart button is. It's a very new camera, I only got it 2 weeks ago. Please help!


Hi,This is a common problem on this set. The lens error is common for cameras with telescoping lenses.\015\012\015\012You can help the motor by connecting the AV cable --- this keeps the LCD off and not d ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

Lens Error I dropped my camera and now when i try to take pictures the camera says Lens Error and makes a clicking noise. it also says to restart the power, but when i do, nothing happens..HELP! ASAP!


What do you do if it's a lens error? ... Casio Exilim EX-S500 Digital Camera

I'm getting error message that says "lens error restart camera. the lens won't retract and restarting the camera doesn't do anything. Help!!


Thats a well known problem wiith that model .. here is a site that explains the failure and gives solutions .. \015\012http://www.e18error.com/ ... Canon PowerShot A480 Digital Camera

Lens error when i turn off my camera, the lens fails to retract and i get a screen that says, lens error, restart camera. Can anyone explain this. When i try to turn cmera off/on the lens remains extended. It does take pictures.


On Fathers Day, 2006, I received a Canon PowerShot SD700 IS, and it has served me well. Just before Father's Day, 2012, my young son dropped my precious PowerShot on its lens onto a wood floor, causing the smallest ring at the end of the lens assemb ... Canon PowerShot SD700 IS Digital ELPH / IXUS 800 Digital Camera

Hey, my canon SD890 has a problem, it says "lens error, restart camera" when I turn on, and the lens stick out and won't get back to normal. Is there any restart bottom that can restart my camera?


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a professional. ... Canon PowerShot SD890 IS Digital Camera

I have a Canon Power Shot SX120 IS camera. I turned it on and the lens open a portion of the way and I got an error message that say, "Lens Error Restart Camera". I put fresh batteries in it this morning and have only taken about 10 pic's. I turned the camera off and removed the batteries then replaced with new ones but I still get same message. Please advise if you can.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Canon PowerShot SX100 IS Digital Camera

Just purchased an powershot SX1 IS. I took one photo, zoomed in on it to see how clear the zoom was once taken a photo. THen it switched itself of with the lens still out. Now when turning it on it has a black screen and say lens error...restart camera. I have tried holding func. when turning on the camera and the time comes up on the screen. But as soon as I let go of func I get the error msg.


Hello if you just purchased this unit Then i advise you to take it back, this sounds like a system control issue or main board problem. Holding the function key while turning is factory reset, if this is not working right them the camera has a bad sy ... Canon PowerShot SX1 IS Digital Camera

I am getting an error that says lens error restart camera. How do I restart the camera?


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon Digital Cameras

Lens error I dropped my camera that I just recently recieved. When I try to turn it on it says "lens read error restart camera." I want it fixed! but I don't want to pay a lot of money to get it fixed. Any suggestions?


The same thing happened to me:When i tried to turn on my camera it sounded like the lens tried to open and come out but it then stopped as if stuck then the camera beeped a bunch of times and then gave me the black screen with that readin ... Canon PowerShot SD750 / IXUS 75 Digital Camera

How to restart canon ixus 70. Get an error message saying ''Lens Error. Restart camera.'' Lens won't extend.


Your problem may be due to weak/worn out batteries or corrosion on the battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything else: r ... Canon Digital Cameras

When I turn my camera on, I get a message that says, "Lens error, restart camera," but everytime I restart it, I get the same message.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Canon PowerShot SD1100 IS Digital Camera

My canon powershot a590 camera lens is stuck. When I attempt to start my camera I get a message saying Lens Error Restart Camera then the camera immediately powers off.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Canon PowerShot S2 IS Digital Camera

I dropped my camera today, and since then, I can't power down correctly. The lens will not go back in, and I can't use the camera at all, not even to view pictures already taken. I get a message that says lens error, restart camera. Can you help?


Try wriggling the lens LIGHTLY as you power off and see if you can get it to go in.\015\012If that doesn't work, I hope you have insurance, as it will need to go in for repair.\015\012It is damaged. Sorry for the bad news. ... Canon PowerShot SD600 Digital Camera

When I turn on my camera (Canon power shot SD600) it won't come on... I get a series of three beeps then a message on the screen that says "lens error, restart camera." The problem is, I don't know how to restart my camera.


Take it to a proffesional... ull need a new lens and more likely a whole new camera but dont start buying until u ask someone that know ALOT about cameras anyway id have to see it up close to know wat excatly is worng. !!!! try cleaning ur lens !!!! ... Digital Cameras

Lens error, restart the camera. How to retart. The zoom lens projected is not getting back again When the camera was on, the zoom lens cameout and got struct and not going inside. we get a instruction as ''lens error, re start the camera'' W e dont know how to restart and tried but failed. we need solution. We are unable to use the camera.


Lens errors are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or ... Digital Cameras

Lens error When I turn the camera on it says "Lens error, restart camera," and turns itself off. When I turn it back on, the same problem occurs. The lens covers aren't completely closed, and the entire lens seems to be sticking out a little bit, like it didn't retract all the way. Please help! Thanks. Turn on the camera, camera shows a canon logo, then before turns off it said lens error, restart camera


\015\012\015\012I have a solution posted in doc "nikon s5 s6 lens cover error repair.doc"  uploaded on site http://www.esnips.com/web/papputatiyasStuff&n ... Digital Cameras

When I turn my camera on, it immediately says lens error on the screen and automatically turns the screen off. I am also unable to get the lens mechanism to go back in to the camera.


Usually when there is a lens error the camera needs a repair.\015\012However Here are the steps:\015\0121. Make sure you will install a new or fully charged battery/batteries into your camera.: Pls. use lithium batteries Ni-Mh or recharge ... Kodak EasyShare C633 Digital Camera

When I turn my camera on it says lens error, restart camera. And the lens doesn't come out. It also doesn't let me view my pictures.


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Canon PowerShot SD1000 Digital Camera

I am getting a lens error and then its says to restart camera..The lens is out and will not go back in..how do I fix this.. This camera is a powershot a470


... Canon PowerShot S2 IS Digital Camera

Today i went to a beach nad my camera fell in the sand. After taken it out when i switch on, the lens does not move at all. It is stucked because of sand and on the screen it says "lens error, restart the camera". So in order to get it fix, what should i do? for information, i bought it from best buy in houston last thanks giving.


Sorry to hear that shivamfc. You are an unfortunate Canon user with the unlucky results of digital camera + sand = dead.To make the camera to work again, you need to be sure to remove the sand that got inside the lens mechanism, unfortun ... Canon PowerShot SD880 IS Digital Camera

Camera, Powershot A480 - thrird time using it says lens error, restart camera - changed batteries. Also lens stays out???


Lens error means that the retracing/extending mechanism of the lens has failed. It can be due to grit in the gears or a bad motor. Usually not a DIY repair, but since you are desperate checkout this article written by one of our experts. It has pictu ... Canon Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5921 seconds