Having problems with your Canon Rebel XT / EOS 350D Digital Camera ?

On-Off switch At times nothing happens when I turn the camera on. Turning it off & on a couple of times does end up turning it on. After the potential picture is gone!. Dave

Answers :

It could be the switch, the switch in the 300d is a software switch and doesn't actually cut and supply power to the camera. The best way to figure out if it is simply the switch is get the camera powered up and switch it off by opening the battery cover, If the camera powers up reliably opening and closing the battery cover your in with a good chance its just the switch.
\015\012other wise it could be anything, power supply, cpu problems... it may be worth re flashing the software as long as the camera can be coaxed into staying on once on, if the camera powers off while writing firmware it can be fatal to the camera...
\015\012 Fitting isn't too much of a nightmare but involves removing both front and back of the camera and de-soldering quite a few wires.
\015\012 There is also some danger involved as the flash capacitor is quite chunky on these and bite quite hard if you touch the wrong thing so its not recommended to open any digital camera if you don't know what your doing...
\015\012Parts for canon cameras are available from most approved service centers but its worth phoneing a few as the markup differs from one to another. another way is to buy a faulty camera from somewhere like ebay and use parts from that..
\015\012Best of luck
Repair Help & Product Troubleshooting for Canon Rebel XT / EOS 350D Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

On-Off switch At times nothing happens when I turn the camera on. Turning it off & on a couple of times does end up turning it on. After the potential picture is gone!. Dave

It could be the switch, the switch in the 300d is a software switch and doesn't actually cut and supply power to the camera. The best way to figure out if it is simply the switch is get the camera powered ... Canon Rebel XT / EOS 350D Digital Camera

Picture error I have a problem with my Olympus SP 500UZ. When I take a couple of pictures on one day. Shut the camera down and start it later on to take new pictures. The screen turns blue when I want to see the pictures. It gives the message: Picture Error or Fatal error and every photo on the memory card is gone! I send it to the Olympus repair for three times now, but they tell me every time that there's nothing wrong with the camera. Is this a known problem??

... Digital Cameras

Exilim casio I took a bunch of pictures today then turned it off, then my friend reviewed three more she had taken and the next time we turned it on all the pictures were gone.

Did you transfer them to a computer? Sometimes that will automatically delete them. Did you go into the menu and accidentally erase them? It's hard to say what happened without knowing exactly what all was going on. It's usually not real easy to ... Casio EXILIM ZOOM EX-Z60 Digital Camera

My camera is charged but for a while when i turn it on the screen is just black and my pictures do not come out. It has been doing this for a while but on and off and would usually start to work again after a while. Now it hasnt gone back to normal for a long time and i cant take any pictures. i tried taking out the battery and memory card and putting them back to refresh it but it still wont work. Its the last week of school and i need my camera to work asap !

Some times it works and sometimes not, it is due to loose contact.\015\012Try cleaning the battery terminals to remove oxidation and other coating formed due to atmoshphere, ensure memory card terminals are also well cleaned and battery is char ... Digital Cameras

I have casio exilim ex-z50. It worked fine the last time i used it. I went to use it yesterday and when i powered it on it asked for a date & time reset. after i reset the time it turned off and would not turn back on. After charging it it would turn on, but with no display. The display is completely black and when i take a picture and retrieve it from the camera the picture is also completely black. any suggestions. thanks

Your problem may be due to weak/worn out batteries or corrosion on the\015\012battery contacts inside the camera\015\012which can prevent the full power of the batteries from flowing into the\015\012camera. Try this free fix before you do anything el ... Casio Exilim EX-Z50 Digital Camera

I received a canon powershot as a gift last year and am just now really starting to use it. The pictures seem fine, but the it seems like I am frequently requested to put in the date and time (i.e. about every 2nd or 3rd time I turn the camera on). Is there somethign I can do to get the camera to retain the date and time? It is sort of annoying that I can't turn it on and take a picture quickly since it won't let me take one until I have entered the date and time. Also, I don't think it is stamp

There is a button battery in your camera (CR1220) that remembers the date and other settings when you remove the main batteries. It probably needs to be replaced. It's in a slide-out holder next to the AA batteries (see page 184 in the manual). ... Canon PowerShot A590 IS Digital Camera

Kodak easyshare z712IS. sounds like a typical problem but...I try to turn it on, lens only comes out a little bit, then it turns off. I replace the batteries and the set time and date comes on...I set time and date camera turns off. I CAN in fact view pictures in the gallery but as far as taking pictures....nothing.

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Kodak EasyShare Z712 Digital Camera

Camera problems Every time i try to turn on my camera it will sometimes turn off byitself and i cannot zoom in or erase pictures and when i take the picture it will not takeits time to tak the picture it will just take it and always come out blury

The reason the camera may go off by itself is that battery low. Or, if you don't use it for a while, power saver kicks in.If it turns off immediately, you may have problem with a short in power switch (if something was spilled on it). I ... Canon PowerShot SD600 Digital Camera

Epson 750Z won't take pictures with new 2gb Sandisk ultra II compact flash card. When I press the button to take a picture, the green light turns to orange for a long time. With the Ultra card in the camera, the lens takes a long time to return to the Off position after turning off the camera. It will still take pictures using a Lexmar 32mb card.

... Epson PhotoPC 750Z Digital Camera

My canon powershot camera goes to set the date and time every time I turn it on. I set the date and time, take a few pictures, turn off the camera, turn it back on again and it ask for the date and time to be set again. This problem developed after a year and a half of no problems. Is there some way to set the clock where it will continue after it is turned off?

\012\012try these:-\012\012\012connect it to pc and on it\012vaccum the barrel of lens\012changing mem. card and batt. for 2min.\012 ... Canon PowerShot SX10 IS Digital Camera

Taking pictures My camera takes a long time taking pictures and flashes two times. It also takes a long time to sitch back to the main screen after taking the picture. The screen turns black for about a minute then switches back to the original screen. It also has a red hand on the right side of the screen and alot of the pictures are blurry.

HalloFirst, try to use different batteries. it can cause to long reaction timesSecond, try to buy a faster memory card, it usually help for the time it takes to upload and see the pictures on the screenabout the blurry pictures ... Nikon Coolpix 4600 Digital Camera

Problematic Camera I have a EasyShare DX4530 which has suddenly started acting funny. Here's the sequence of events: - power up works fine - lens comes out ok - green light glows steady, ready for a picture - picture takes fine - green light doesn't turn on again - no amount of pressing the shutter button will bring the green ready light back - pressing the SHARE button a couple times (sometimes 2, 3, even 4 times) will move thru the share sequence and then finally exit that function, turning

I just discovered that the real problem is a STICKY SHUTTER BUTTON, staying down after taking a picture. This prevents the green ready light from coming on until I jiggle the shutter button. It has actually started to be hard to press, making a defin ... Kodak EasyShare DX4530 Digital Camera


Some reasons for this may be the Memory card is full, locked, or not inserted,or\015\012\342\200\242 Flash is charging.\015\012\342\200\242 Camera is not in focus.\015\012\342\200\242 CPU lens with a ... Nikon D40x Digital Camera

I have a sony cybershot camera, i took it into the mountains the other day, and it has not been working properly since. every time i turn it on the lens comes in and olut multiple times and says, "turn the power off and on again." i can still look at pictures on it, but am unable to bring up a menu or take any pictures. i have recharged the battery and let it warm up, but nothing seems to change anything.

DSC-W120===============Hi,You need to replace lens assembly in camera to get it back in business.Lens mechanism is not sending initialize signal to system control due to some reason and system control chip tries to open ... Digital Cameras

When i turn on the camera the lens wont pop open even when the battery is fully charged.... i was taking pictures and it working fine turn the camera off and on again then the lens wont open anymore? i can still view all the pictures i took from the camera but cannot take pictures anymore coz of the lens wont open. i tried initializing the camera by going to set up it didnt work..msg error said turn the camera off and on again and i did but didnt work either many times i tried please help thnks!

The problem is\015\0121- some dirt somehow got on the outside of the lense. After it was retracted fully in, it prevents the camera from opening again. When you turn it on, if it opens a little bit, try to pull it out NOT too hard and let go ... Sony Cyber-shot DSC-N2 Digital Camera

I am unable to take pictures after turning on the camera. Each time I turn the power on I have to go through all the set up steps in order to take a photo. How can I go through the steps and save them so that each time I turn on my camera the settings are saved and I do not have to go through the steps each time?

Make sure that you don't have virus in your memory card.\012format all memory spaces and then again reset it.\012restore to factory setting\012\012if you like this kindly rate me ... Casio Exilim EX-Z750 Digital Camera

I have a samsung pl70 and the flash wont go off when taking a picture. when taking a picture the flash icon flashes red and takes time to actually take the picture. Once taken picture the flash icon flashes red and takes time to disply picture, when flash is turned off it works fine hope you can help thanks

Does the camera have a reset botton should be a small hole with reset written by it try there first. ... Samsung Digital Cameras

Missing pictures I recently went on a trip and took some pictures that disappeared from my camera. Later I started getting the message 'Card cannot be read' so I purchased another memory card. I was taking pictures when I get the message 'Card cannot be read'. I turned it off and back on and the missing pictures were there. I then get the message 'Out of memory'. I turn the camera off and back on and the missing pictures are gone again. WHERE ARE THEY???

Hey flowernthe,\015\012 The error message “card cannot be read" means there was and error when the camera tried to access the memory card. To fix this you should make sure you are using the right kind of memory ... Nikon Coolpix 4600 Digital Camera

When camera gets turned on, the lens goes in and out of focus a few times and then screen turns blue and displays "D : 5f08 5e02" and does not go back to shooting pictures again. But for just looking at the pictures on the memory card, it works if turned on in that mode. If turned on in photo-shooting modes, it cannot be switched back to view photos. (OLYMPUS M700)

It's a sensor issue. The error indicates there is a problem on the lens.It may be caused by sand, broken gears or any other foreign object in the lens mechanism.A simple fix is to turn ON camera while holding it with\015\012the len ... Digital Cameras

My Sony DSC-W30 has a problem. When turned on the screen picture rarely can be seen. It is either completely dark and a picture taken will also turn out dark and unseen. Sometimes the screen will turn on and off many times and then turn dark. Sometimes I can smack it on my hand and it will go black or come back on. The anti-shake button sometimes allows it to come back on. I do not have any screen messages and all the other features seem to work but in a dark unusable screen.

Sounds like a loose LCD connector. It does not sound like a image sensory problem to me. You will have to disassemble it , remove the connector cable then replug it back into the panel and that should do the trick. However I suggest that you take th ... Digital Cameras

The camrea turns on but will not take a picture. the card is not full. you can use all the buttons when you first turn it on but then when you try to take a picture it will not take one and then you can not use the buttons anymore. If I shut the camera off and turn it back on I can use the menu buttons again. When I turn on the camera the red button by the view finder blinks three times.

Try this...the next time all the buttons work, go into the menu and search for "reset" and follow the on-screen instructions. ... Pentax Optio 330 Digital Camera

There are several problems with my camera one of them is the fact in that Every time i turn on my Lumix 10x mega pixel camera the lens won't focus it also won't let me take any pictures. When i turn the camera off the lens won't go back into the camera but when i turn it back on the lens gos in and then out again. There is one more problem whenever i go to look at the pictures on play i can look through a few before its says "please turn camera off then on a again" it also says the same message

OK, if there is sand in the camera, the gears will bind or stop causing the error that you described. I think it needs to be taken apart and cleaned by a service center before using again. Or you could buy a spare caemera to use on your family holida ... Digital Cameras

Turns Off Put new batteries in, took a picture and the picture didn't show up. Then the camera turned off. This happened once before but I forgot what I did to be able to use the camera. This time before it turned off the yellow light flashed on the back of the camera then the camera turned off.

Hey MaryKing,\015\012 I would first try taking out the batteries and waiting a couple of minutes and reinserting them, and if this doesn't work I would try a new set of batteries (battery manufacturers' sometimes do m ... Kodak EasyShare Z1275 Digital Camera

Every time I turn my camera on it asks me to set the time zone, area I am in, date, etc...again. It's causing problems when I download pictures. They're all out of order. Even when I reset the date, time, etc. it always asks me to reset it every single time I turn on my camera.

... Canon PowerShot S400 / IXUS 400 Digital Camera

System Error I downloaded the pictures onto a CD from my Konica Minolta today like I always do. When I was finished I went onto the camera to delete the pictures and format the card - like I always do. (I have had this camera for right at 1 year) When I turn the switch to the "view" mode it comes up with "system error" within about 2 seconds and the whole camera turns off. If I go really fast I can delete one picture at a time. I can still take pictures and they still show up (for 2 seconds).

Same thing happend to my father's camera (memory card). Seems that deleting the pictures from the card via the computer solves the problem. Corrupt files on the card cause the camera to read system error. No corrupt files = working camera! :) ... Konica Minolta DiMAGE Z5 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3672 seconds