Having problems with your Casio Digital Cameras ?

My new EX-V7 dig camera is switching itself off after about 5 seconds - screen message says ' Camera Stabiliser is not available'


Answers :

The cause of this camera going of is not a mystery its a malfuction in the stabilizer that will need to be warranteed, As you did mention new and if this is the case this should be warenteed and not messed with thus I will not provide a solution dor A DYI at this time. Take this back to the store for a immediate exchange or refund or to a local camera shop near you. I always use ritz camera and send all my people with stabelizer conerns to them for repair.
\015\012
\015\012I know this did not fix you concern but do hope you rate it please!
\015\012
\015\012
\015\012Rulds2008
Repair Help & Product Troubleshooting for Casio Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My new EX-V7 dig camera is switching itself off after about 5 seconds - screen message says ' Camera Stabiliser is not available'


The cause of this camera going of is not a mystery its a malfuction in the stabilizer that will need to be warranteed, As you did mention new and if this is the case this should be warenteed and not messed with thus I will not provide a solution dor ... Casio Digital Cameras

My Kodak C913 sometimes follows switch on with the statement memory card needs formatting. I have tried to do this several times but to no avail. I am then faced with a message which says that I should use a new card. I am now on my third card and I still get the formatting message. This does not happen every time I switch on but about 8 times out of ten. the other 2 times the camera works well whilst it is still switched on. When I switch off the problem re occurs. There is nothing wrong with a


First of all, stop putting your cards in another camera....this can corrupt the card. With no card in the camera, go into the menu and find "reset"...follow the on-screen instructions. Insert your card, turn on the camera and go into the camera menu ... Kodak EasyShare C913 Digital Camera

Hi there, My laptop is suddenly unable to detect the camera, canon lxus 90ls, I have reinstalled the software and also tried a different lead but to no avail. The camera does know the lead is in place as the lens remains stationery when switched on, however I only see the last picture taken on the screen, not the pc connect sign. I have tried going through start/programmes/ window (s) etc, but it is saying the camera is not there. I am totally at a loss. Thankyou.


Simplify your life...get a card reader. ... Digital Cameras

I have a Sony Cybershot DSC-W120 digital camera. The problem I am having is in regards to the lens going in and out whenever I switch on the device. The an error message appears on the screen saying "Turn the power off and on again". Should I take apart the camera? Please assist, thank you.


Try new batteries ... Sony Digital Cameras

I have a Sony Cybershot DSC-W120 digital camera. The problem I am having is in regards to the lens going in and out whenever I switch on the device. The an error message appears on the screen saying "Turn the power off and on again". Should I take apart the camera? Please assist, thank you.


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Digital Cameras

When I put on the camera, I am not able to take a photo because the lens goes back in. The message on the screen says switch the power off and then on again. I have switched it off and on several times but the problem persists. What should I do?


Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Sony Cybershot DSC-T77 Digital Camera

When switching the camera on to photography mode on the scree it says Camera stabiliser is not available and cannot do anything afterwards


Repair the stabilizer or flex loosen ... Casio Exilim EX-V7 Digital Camera

My ex-v7 camera will not take photos screen says camera stabiliser not available


... Casio Exilim EX-V7 Digital Camera

ACCESS message Getting a message on the digital camera screen that just says ACCESS then aske me to switch off and on again but won't work - any ideas? Its a DSC-W50.


One guy with the same problem fixed it by running over it with his SVU and posting the video on Youtube. It's smashed but "access" has disappeared from the screen. ... Sony Cyber-shot DSC-W50 Digital Camera

A message comes on the screen saying please turn camera off then on again. The camera has to be switched off and on it then works for another 15 - 20 seconds.


The message appears when force has been applied to the lens such as the lens trying to extend while in a case or a pocket. ... Panasonic Lumix DMC-TZ1 Digital Camera

I have a Photosmart R725 camera with some problems reading the card. Message on screen says "card unreadable" or "card unsupported". This occurs with a new card, and even with a card that I have been using already, and have hundreds of photos on. I have tried to find the answer to my problem in the book, to no avail. Please help. Card unreadable on screen, also unable to establish a connection with pc. This also occurs with a new card


You can contact HP through their online chat page. I have contacted them several times in regard to my HP camera and they are extremely helpful. You should still be able to contact them through this service even if your warranty has run out. Here is ... HP Photosmart R727 Digital Camera

Cant switch camera off message on screen says processing


Wait for it to finish processing. If it is taking too long, just remove the batteries and then replace it back. ... Samsung NV30 Digital Camera

Screen message when switched on: "!Turn off the camera and turn on again" When I do this it just says the same thing again.


... Fujifilm Finepix S2980

Olympus DE-510 Zoom When I turn camera on, the screen has a red T at the top, with a box saying Yes, and one saying No. The line at the bottom says Go>OK. If I click OK, I get the same screen again. If I click Yes, I get a Card Error message. I cannot take a photo. I am on a cross country trip, and don't have my manual, but I sure would like to be able to take pictures of the Rockies! I know the camera is old, but I love it. Please help me to get it working again. Thanks, Toni Sinclair


I tried to find more information on the zoom error, and couldn't find much, but I did find a free manual, which might help:\015\012 ... Olympus Camedia D-510 Zoom Digital Camera

Err 02 When i switch on the camera the EOS appears on the lcd screen other than that it is blank. After a while an error 02 appears (CF card fault). I have tried previously working cards and they all do the same. The manual says re-format the card but as the lcd screen is blank, this is not possible. The battery is fully charged. Is this a problem with the camera or the card.. My gut feeling says it's the camera.. Please help, Thanks...


Hi,If we talk about Error 02 - This error occurs when image data cannot be written to the CF card.\015\012This error can occur when the CF card is not fully seated in the camera\015\012or if the 350Ddoes not detect a card-ready signal wit ... Canon Rebel XT / EOS 350D Digital Camera

Hi. Last time I went to used my camera the screen showed a message saying the memory card was damaged. When I tok it out I saw that it was slightly damaged on the bottom strip. I have replaced it with another memory card but the same message keeps coming up so I cannot take any photos.The message says: "This memory card cannot be used. Card may be damaged. Insert another card." Any suggestions how I can reset the camera before I pay to put it in for a service?


It is possible that there are bits of the damaged pieces struck inside the card reader contacts in the camera.\012So if you can remove the battery and memory card and tap upside down ,you might be able to retrieve the broken pieces.\012us ... Nikon D40x Digital Camera

Screen message: Camera Stabiliser is not


My ex-v7 camera will not take photos screen says camera stabiliser not available\015\012\015\012\015\012 thank you phil ... Casio Exilim EX-V7 Digital Camera

The screen on my camera says 'Memory Card Locked'. The solution is to take out the memory card and flick the switch on the side. But I can't take the memory card out- it appears to be stuck. At the same time as the screen starting to say 'Memory Card Locked' the memory card only comes out half way so I can't flick the switch. How do I solve this problem??


... Panasonic Lumix DMC-ZS3 Digital Camera

Whenever I plug the USB cable into my camera, the screen goes black. It does it even when the cable isn't plugged into the computer. Even though the screen is black the camera still functions normally but it won't let me upload anything. When i try to upload my pictures it keeps saying USB Mode connecting........ then it says below that: Switch on [ MENU ] .... i don't know what to do ????


As far as I know, most cameras are made so that once it senses a USB cable (whether as being inserted physically or as a source of current), it reduces the camera to pretty much no more than a memory card reader.  It is my belief this is so you ... Sony Cyber-shot DSC-S650 Digital Camera

Kodak Z1015 Brand new Kodak Z1015 camera. I take three shots and a message appears on the screen saying "PROCESSING". At this time the camera is inoperable. 40 seconds later the message goes and I can take another three or four shots, then same all over again. Kodak as much use as an ashtray on a motorbike. They say I must take a download from the Easyshare software, but that won't work. Any suggestions? Cheers, Dave Watts.


Have you tried downloading updated firmware. Also this camera is slow in processing photos(especially if you use the Smart Capture mode. Hope that helps ... Kodak EasyShare Z1015 IS Digital Camera

How do I download pictures from my Olympus camera to my PC? I have connected the camera to the computer using the USB cable, and this has been recognised by the camera. A box has lit up on the camera screen and I hake clicked "OK for PC". The camera screen then says "Please wait a moment" and then appears to switch off and nothing else happens. Help please.


Use a separate card reader to download your pictures. ... Olympus Stylus 710 Digital Camera

I have just downloaded the camera on to iphoto and have cleared the camera memory . I clicked the eject icon on iphoto and once cleared unplugged the USB download cable . I have just pushed the power button to turn the camera on and firstly get the message on the camera screen "Access" then a message comes up saying "turn the power off then on again " When I do this the same process repeats itself . The lenses wont open and protrude out of the camera ready to take photos. The battery has ju


Sounds like you did two things wrong...you deleted/erased/or formatted the camera using the computer. You disconnected the camera without using the "safely remove hardware" function. ... Sony Cyber-shot DSC-W50 Digital Camera

Kodak v610 camera (easy share) My 10 year son was using our v610 camera and the following error message E45 (please see user manual) appeared on the screen. We were unable to switch the camera off and therefore the shutter remained open. The shutter will only close if I remove and replace the battery and when I turn the camera back on the shutter remains open and the same error message returns. I have checked the manual and it doesn't mention this problem. thank you jane


HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \015\012probability is t ... Kodak EasyShare V610 Digital Camera

I just bought a SanDisk Ultra SDHC memory card - 4 GB for my Canon 610 Camera. Previous to this I had a 1 GB card in the camera and it worked fine. Now with the 4 GB card I get a message which says "memory card error" and "Card locked!". When I go to the screen tools screen on the camera, the word format is blanked out and cannot be selected. -- Is this the wrong card for the camera?


Hi,Canon A610 firmware support maximum 2GB memory card and above that limit, memory card error message will appear.Please use up to 2GB memory card in your camera.Hope this info will help you.Thanks. ... Canon PowerShot A610 Digital Camera

Mode switch has broken off and the camera screen says no image


It probably remained locked on the viewer and there are no images capture stored into the camera ..that's why it says that ....and it must be a way to restore the function of that button cause no matter if you lock it permanently into the the shootin ... Canon PowerShot S500 IXUS 500 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4584 seconds