Having problems with your Casio Digital Cameras ?

Move a picture from the camera to the computer


Answers :

Hi
Two ways:
1. Plug the camera into the computer via the USB cable that should have come with it.

or

2. My preffered suggestion and far more hassel free:
A Card Reader

Benefits instead of 1st option:
1. Gets rid of the need for drivers, and installation software if you are using XP or Vista.
2. Saves on the wear and tear on the battery of your camera.
3. Far quicker to transfer the pictures from the card reader than the camera.
4. A multi-card reader can be used for different Memory cards if you have different cameras in your house.
5. Often overlooked is the potential danger your camera is in when plugged into the computer of the lead getting caught or pulled, potentially landing your camera on the floor.
6. These days card readers are very cheap.

Hope that helps.
Repair Help & Product Troubleshooting for Casio Digital Cameras

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My camera was working fine . I moved the computer to another room. This is the problem when I try to transfer pictures from the camera to the computer I get an error message stating that the software is unable to find The Olympus Digital camera connected to the USB Port on your computer. Well I have tried eveything. A new USB cable, reinsatlling the program. Moving the cable to all ports on the computer. I took the camera to a friends and we insatlled the program on his computer and it did the s


Try to get a external memory card. And try that instead. It might work better than the usb. ... Olympus Digital Cameras

We use our camera for passports, so having the pictures stay in the camera, then hook to camera up to the passport photo printer, is the easiest way to go. Recently, I ended up taking lots of pictures, so I moved the passport photos off of the card and onto the computer. When I was done, I put the passport photos back onto the card (after removing the new photos), but now the camera says there are no pictures, even though I can view them through the computer using the USB cable attatched to the


Because you used the MOVE command, what move does is take it totally off so now you camera lost the location of the file known as play list. Yes it will still be on the memory card but the play list is gone therefore it will be ino ... Olympus Camedia C-4000 Zoom Digital Camera

Trying to move picutres from Olympus FE-190 to a new computer that has Mircosoft Vista for OS and the program gives the error: "The software is unable to find an Olympus digital camera connected to a USB port on your computer. Would you like to search again?" Camera is connected but the software seems unable to find it. I'm also able to use a different program to move pictures, but I want to use the Olympus program.


To learn about the new and free version of Olympus Master 2 software go to: http://www.olympusamerica.com/cpg_section/oima_softwareMaster.asp ... Olympus Digital Cameras

I have Sony DSC-T90 camera. I think it's memory card is virus infected. When i attach my camera to computer to download pictures then only shortcuts of the folders are displayed. I can view the pictures in Camera but only shortcuts of folders are displayed. When I click on the shortcut a message "The item 'zivutx.exe' that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly. Do you want to delete this shortcut?" is displayed.... Please help me to


Have you tried removing the memory card from the camera and inserting it directly into the computer's card reader or any other card reader? ... Digital Cameras

Moving pictures Is there any way to move pictures from the internal memory of the camera to the memory card? I cant find any of my cords but still want to load pictures on the my computer. Thanks!


Turn your camera on and go to playback mode of your pictures. Once you have done this, press the menu button. Scroll down to the last item on the list, (I think it is the 4th item) and it will say copy. From this you can copy pictures from your me ... Nikon Coolpix 3200 Digital Camera

I accidentally deleted all the pictures files from DCIM file folder on the computer (Imac) using "move to trash" option instead deleted them using camera (nikon D40x) menu. Now, even there is no images on my camera I am getting "card is full message" and cannot use camera at all. I did not deleted NIKON001.DSC file just the picture files.


Also try sites from SanDisk and Transcend, because they often offer the recover tools for free. The "free" tools show they can find your deleted pictures and then ask mony to undelete them. Most memory card manufactures have recover tools. Once I got ... Nikon D40x Digital Camera

I got a virus warning when I inserted the memory card into my computer. After I moved this threat into the chest and deleted it, I can see the pictures in the camera but not in the computer. The virus software deleted the folder where pictures are stored so I created one, but when I open it, it is empty (even though the pictures are in the card)


Use a cardreader to download your pictures to another folder you create on your desktop. Then, format the card in your camera to erase everything for a fresh start. ... Samsung Digimax S500 Digital Camera

Need to move images stored on the camera's memory to the SanDisk memory card instead. I accidentally took pictures and forgot the insert the SanDisk memory card. The images are saved but now I don't have anyway to download them onto my computer. I don't have a cable that connects the camera to my computer... just a SanDisk reader so I have to get the images to the memory card. Is there a way to do this on the camera itself?


Follow the instructions on pages 178-179 of this manual. ... Casio Exilim Zoom EX-Z700 Digital Camera

My camera won't let me take any pictures or look at them. Everytime I turn it on it says memory card error, card locked. i've tried moving the locked switch on the side of the card up and down but that hasn't done anything. and i know it isnt my camera because i put an old memory card in it and it read that memory card just fine. I have pictures on there that i dont want to lose and i tried putting them on my computer but it says i didnt take any pictures..I know i did though because i used it t


It sounds like your media is malfunctioning (controller issue).Our company, LC Technology, is the only Sandisk-appro ... Fuji FinePix A350 Digital Camera

Moving photos Is it possible to move pictures from computer back to the SD card through the camera - computer USB connection?


Sorry, no. You can use a card reader to put the pictures on the card. Bear in mind that if you've done any editing on the photos then the camera may not display them. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

It appears in a recent move that I have misplaced the cd that programs the camera so that I can plug into my computer. It is possible to replace that. I now have 50 pictures in the camera that I cannot download to my computer.


If your camera uses a memory card, just buy an inexpensive card reader and download your pics to a folder you create on your desktop. Double-click that and you can open your pictures. ... Digital Cameras

I can't move pictures from my computer back to my camera


Just get another sdcard,,plug in to ur cpu,,put the on it,,if you need get you a card reader ... Panasonic Lumix DMC-FZ20 Digital Camera

Camera Help! I've had the JVC dual mode GC-A33 camera since it's been out which was awhile ago. My problem is this: I've gotten a new computer since then and I've had pictures on this camera for a few years now. I recently found this old thing after moving. I downloaded the software. I connected the camera via USB connection. I hit the tranfer button and it gives me a little something that says: Connection failed. Please check that 1) The camera is on, and set to PC mode 2) The USB cable is conn


When it's plugged in, are you remembering to press the little (M) button to switch it to PC mode? If so, you might need to install the camera device. Go into your Control Panel and follow the steps under the Scanners and Cameras tab.\015\012 ... JVC GC-A33 Digital Camera

Camera Help! I've had the JVC dual mode GC-A33 camera since it's been out which was awhile ago. My problem is this: I've gotten a new computer since then and I've had pictures on this camera for a few years now. I recently found this old thing after moving. I downloaded the software. I connected the camera via USB connection. I hit the tranfer button and it gives me a little something that says: Connection failed. Please check that 1) The camera is on, and set to PC mode 2) The USB cable is conn


1. Remove the software- Windows does not need it. 2. Check the batteries are fresh in the camera. 3. Try another lead.4. if the Memory card is removable- try it in a card reader.---------------------------------------- ... Praktica DCZ3.2S Digital Camera

I have 3 pictures stored in the camera's memory that I want to move to my memory card so I can put them on my computer. How do I do that?


To copy pictures from internal memory to memory card, follow the instructions on page 59 of this manual. ... Samsung DualView TL205 Digital Camera

I have a new Canon PowerShot SX130 IS digital camera. I have my first four pictures on the camera. I have installed the camera software on an IBM ThinkPad T61. When I try to connect to move photos to my computer, I get the message "Failed to import images." I have disconnected all USB cables except for the camera one, and then rebooted.


Hi!It seems like a known issue with Canon's software - with no solid solution so far... People inform that they get this error when trying to copy large amount of photos at once, but almost never when trying to copy smaller amount (about ... Digital Cameras

I have 2 pentax optio m20 cameras purchased at the same time. Both have developed the same problem: hit the on button and it tries to come on, but makes a funny sound, lens moves in and out trying to focus (screen is lit showing focus changing and green mode icon), then the camera shuts off and never gets into picture taking mode. I fixed one of the cameras once by pushing buttons after connecting and disconnecting from the computer (and the camera worked okay for several months), but repeate


Your previous diagnostic definitely\015\012 indicates a mechanical problem, once the possibility that a false \015\012sensor signal to the main board as the cause by resetting all functions.\015\012 It is very likely that ther ... Pentax Optio M20 Digital Camera

I BOUGHT A CANON A40 CAMERA ABOUT 6 YRS AGO. WE HAVE MOVED AND RECENTLY I HAVE PURCHASED A NEW COMPUTER. TO MAKE A LONG STORY SHORT I CANNOT UPLOAD MY PICTURES FROM THE CAMERA MEMORY CARD SINCE I CANNOT FIND THE SOFTWARE THAT CAME WITH THE CAMERA. iS THERE ANY RECOMMENDATIONS THAT YOU CAN MAKE? THANKS FOR ANY HELP THAT YOU CAN OFFER.


Hi,There is another effective alternate is to take out memory card from camera and plug it in memory card reader that will be connected with computer in USB port, go to My Computer and look for newly added icon that is memory card storage, clic ... Canon PowerShot A40 Digital Camera

My date/time is set and on camera can see it. I moved pictures to my computer and it is not stamped on picture, how can I get it to be on picture?


Almost all digital cameras store the date and time (and a lot more) with every picture in its EXIF metadata. Most cameras also will not deface your pictures by scrawling a string of digits across them. If you want the date printed with your picture, ... Digital Cameras

My date/time is set and on camera can see it. I moved pictures to my computer and it is not stamped on picture, how can I get it to be on picture?


Almost all digital cameras store the date and time (and a lot more) with every picture in its EXIF metadata. Most cameras also will not deface your pictures by scrawling a string of digits across them. If you want the date printed with your picture, ... Fuji FinePix Digital Cameras

When I put a 2gig memory card in the camera and take a shot it tells me the card is full. This is a brand new card. When I hook the camera to a usb port the camera says 'usb mode' and freezes up. I can't copy pictures to the 2gig disk or move them to the computer. HELP!


To move pictures to your computer, you don't use the camera, just select usb mode. Then on your computer open "my computer" or "computer" which you will find from either your desktop or from start menu. In computer, look for the camera or a "removabl ... Digital Cameras

Olympus master 2 disk does not load down from tray; needed is to install Olympus vr-310 camera disk in-order to move pictures from camera to computer file, say disk D or E; could you provide?


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster t ... Digital Cameras

I took pictures with my sony digital camera how do i put the pictures on the computer to move them to face book


The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster t ... Sony Cyber-shot DSC-W50 Digital Camera

I have a canon Power Shot A520 and want to download several moving pictures to a DISH network TV.I have the interface cable (that came with the camera) attached to both the TV and the camera as I did to successfully download to my computer. However, I don't know what to do next. DISH folks say they don't know how. Can you help? Jack Sayers


Page 114 in the manual gives details.\015\0121. Turn camera off.\015\0122. Connect the AVC-DC300 cable to A/V out terminal on camera, and yellow RCA jack to the Video In port and black RCA jack to Audio In port on the television.\01 ... Canon Digital Cameras

Camera message is: memory card requires formatting : I chose the option to format and camera will start formatting then stops and this message pops up:please format memory card or put in new memory card. I changed memory card and same thing happens,I have also tried moving switch on card, This problem started when I used card to transfer pictures to computer.


Try formatting through the computer rather than from within the camera itself. Or, just open the card on the computer, select all, then delete. There's probably a large file in there somewhere that the camera just doesn't have enough ooomphh to move ... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4269 seconds