Having problems with your Casio Exilim EX-Z1200 Digital Camera ?

How do I use self timer. I set in on menu and I

\015 How do I use self timer. I set in on menu and I press shutter and it does not do delay of 10 seconds before pic is snapped?\015

Answers :

In the REC mode, press [MENU]. On the "REC" tab, select "Self-timer" and then press right. Use up/down to select the timer type and press [SET].
But K_akima's answer only works when you have the camera in regular picture mode, not BEST SHOT or any special type of picture, like portrait. Then you have to take it off Self Timer to play back the pics to see if you got anything good. Self-timer should be useful for self-portraits (like passports pics). For group shots, you usually have someone to take the pictures. Poor designing.
Repair Help & Product Troubleshooting for Casio Exilim EX-Z1200 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How do I use self timer. I set in on menu and I


In the REC mode, press [MENU]. On the "REC" tab, select "Self-timer" and then press right. Use up/down to select the timer type and press [SET]. ... Casio Exilim EX-Z1200 Digital Camera

Self Timer How do I use the self timer? I go to "menu", scroll to "self-timer", set up the second delay and number of shots, press the "func/set" button and then nothing happens?


Once you have the self-timer set up, press the shutter release button to activate it. ... Canon PowerShot SD630 Digital ELPH / IXUS 65 Digital Camera

What is the proper sequence in setting up self Timer I lost my instruction book. I never used timer in the past; I have a cannon power shot A560. I go to menu and scroll to timer set 10 sec and 2 shots. push set button. what now?


First you press the self timer button. Then press the shutter button to start the timer.\015\012You can download the manual under the guides and manuals section at this link: http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fc ... Canon PowerShot A560 Digital Camera

Using self timer on the Canon SX110 is. I read the solution here but it just says make it 1 shot I did that but there is still no delay in the shutter and I have that set at 30 seconds. are there other buttons to push. becasue the button it is linked to is the menu and that is all I can get at. Help thanks


... Canon PowerShot SX100 IS Digital Camera

I am using an Olympus E-500. and am trying to use the built in flash, set to one eight or to one sixty fourth of normal output, to trigger an external flash unit. The camera is set to "Vivid", manual, auto focus, and iso 100. From the "manual flash" menu I should be able to select either full, 1/4. 1/16 or 1/64 of the output. However, those choices never light up. I keep cycling through the first two lines of the menu and never reach the third line with the light output options I want. P


You should consult a Professional Photographer / Cameraman or contact the Customer Care of the Company. ... Digital Cameras

I can not set the self timer. In the manual it says hit menue button go to "self timer" select the secons and shot hit "set" hit menu, hit shutter button fully. When I do this the Timer lamp doesn't flash.. no flashing at all.. it takes the picture right away!


The self timer will not work in the "Easy" mode (icon with a heart in it) or in movie mode. According to the chart in the back of the manual, the self timer should work with all other modes. ... Canon Powershot SX110 IS Digital Camera 9.0MP

Can't get to set up menu with my new memory card in camera to set it up to use the memory card instead of the internal memory. Camera keeps saying memory card needs formatted-continue or cancel-I go to continue-it says formatting then goes back to saying memory card needs formatted-continue or cancel and around and around...camera will go to set up menu without memory card in.


1. with no card in the camera, go into the menu and find "format"...follow the on-screen instructions to erase the internal memory.\0122. insert the card and do the "format" thing again from the menu as you just did for the internal memory. ... Kodak EasyShare C743 Digital Camera

I'm trying to shoot HDR photos using my XSi/450D. From the menu two I've set the AEB EV step range as 0, -2 and 2. From here, though, I don't know what to do. If I go directly from the menu to shooting, I don't get any automatic shots, but rather single, individual shots based on the current exposure settings. Help. I've scanned my 45D manual, DVD tutorial, etc. and cannot find my missing step to create a series of AEB shots. Many Thanks, Robert


... Canon Digital Cameras

So...I want to connect my Casio Ex-s5 to my PC. The manual instructions say: turn on the camera, press Menu, then set-up tab. I don't see a set-up tab, only an "easy menu" with 5 optinos (FLash, self-timer, image size, etc). Where is the setup tab?


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Casio Exilim EX-S500 Digital Camera

I have a Kodak Z1015IS, about 16 months old, that has not been subject to any type of liquid or damage. One day I went to use it and I was not able to adjust any of the PASM settings (i.e. f-stop, shutter speed, etc.). All other hardware and menu systems work just fine, it is just that the settings are locked in place (at the levels of my prior use). I've tried updating the firmware, formatting the internal memory, and removing the battery with no luck. Just spent time with Kodak, and a


Kodak is right, they don't release any type of technical information about there products to the user, the only ones that can get parts or tech support are the repair centers, sorry but that is just the way they do things, this is not just Kodak it i ... Kodak EasyShare Z1015 IS Digital Camera

Ixus 500 unable to use menu or setting buttons


There is a problem with your camera you camera’s function button not work due to dust please clean that very care fully before cleaning also battery eject from camera.Hope helpful to you ... Canon PowerShot S500 IXUS 500 Digital Camera

Menu settings Do the picture adjustment settings affect the noise level of photographs, and if I post process should I use the 'softer' setting to minimise noise?


The noise occurs when your camera has to shoot in low light at a higher ISO setting. For the quality of photos this camera gives out, the noise isn't really much of a consideration unless you're planning to try to blow it up beyond 8x10. Softer setti ... Panasonic Lumix DMC-FZ5 Digital Camera

I have a Sony cybershot DSC-W200 12.1 megapixels. It has been working brilliantly, then i turned it on one day and it will not allow me to change any of its settings, even in the manual setting. In auto i can not use flash or micro settings. What has happened and how can i change it back? I have searched through all of its menues and i cant find anything that helps.


Take out the battery and let sit for 10 minutes. reinstall battery and turn back on. everything should be back to normal ... Sony Cybershot DSC-T200 Digital Camera

My cannon ixus 130 is permanently blurred, i have tried resetting to factory setting using the menu


Time for a new camera. There is no reset hidden or otherwise. ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera

Lost images After I clicked the "low format" setting in the memory card settings menu all my photos disappeared.  i have used two photo recovery programs to try and recover my photos. neither worked. any advice?


Formatting a memory card actually deletes all files on that card, including picture files. I am afraid you have loss these file permanetly. sorry ... Canon PowerShot SD1000 Digital Camera

I have a DSC-T10 and the screen does not display any of the menu features. It is has vertical lines across the screen. I would try to initialize it using the set-up menu but can't access it. It is not under warranty and costs to much to send it in for repair...any ideas of what I could try? I did try to reset by holding down the power button for 15 seconds while battery is out but nothing changed.


Hi,There could be 2 Reasons :-1. Bad CCD Sensor 2. \015\012Bad PanelTo Differentiate, Try to Look the Saved images or the \015\012Saved Video's. If you could see them without any Problem, CCD Sensor is \015\0 ... Sony Cyber-shot DSC-T10 Digital Camera

I have a problem with the Canon Powershot 850 IS. Most of the functions on the camera (Zoom, menu, display, menu and function set) are frozen and all I can use is the image capture button and the scroll wheel on the upper right hand side. Can you please provide me with a solution to this problem? Thanks, Robert


The issue here is the micro circuit board inside the camera overheats, from what i read canon is aware of this flaw and has repaired free of charge. But you do need to ether take it to a authorized canon shop or return it t ... Canon PowerShot SD850 IS Digital Camera

I just received a nikon D3000 and in watching the How To video, the guy talks about the Set Picture Control under Shooting Menu. Mine is not highlighted and says this options is not available with my current settings. I would like to know how to make this option available and use the different controls for Standard, Neutral, Vivid, Monochrome, Portrait, or Landscape. Thank you very much!


You need to take the camera out of the point&shoot modes. Turn the mode dial to one of P, S, A, or M. ... Digital Cameras

Lcd Hi. I was sure that the LCD monitor could be used instead of the viewfinder. I cannot find any information on how to activate that portion. All I can do is turn the LCD off and on and in the on position all it ever shows is the current settings. When a picture is taken it goes to the 2 second viewing and then back to the settings menu. I went through the manual and cannot find any advice.


Normaly, a reflex camera cannot use the LCD monitor as like a non reflex camera. Your camera was designed to be used like a film camera. The CCD panel at the film plane is sort of like having a film inside the camera. \015\012\015\012Ther ... Canon EOS 400D / Rebel XTi Digital Camera with 18-55mm Lens

Purchased a PowerShot G6 in 2005, and use it almost daily for product shots. The other day I accidentally hit the menu and changed something; I don't know what I did. Went back to default settings, now everything is 'grainy' and when I click the shutter, it sounds different than it used to... 'slower' is best way to describe.


If u did a reset to factory setting then u have a hard fault in the electronics of the camera, most likely the CCD circuit, Canon doesn't sell parts to the public so the only way to get the camera repaired is to ... Canon PowerShot G6 Digital Camera

Using my Canon XSi/450D, I'm interested in doing High Dynamic Range photography. But I can't discover how to make the automated shutter-speed range multi-shot (3 for the 450D) AEB work. I've gone into the menu and select and change the AEB range ( -2V) and pressed "set." Working from the "AV" in creative mode, I then set up my first shot with focus and ISO, and shoot. Now what? When I press the shoot button, an ordinary photo is captured, and if I continue to press the button additional cap


Click on this link http://www.usa.canon.com/consumer/controller?act=ModelInfoAct&fcategoryid=139&mod ... Canon Digital Cameras

Canon a550 Hi, can someone tell me how to use this self timer in canon a550? i set the selftimer to 10 seconds but still i don't know how to use it. plz plz plz some one help me out.


I was unable to get you a link so I took you a long screenshot of the page, see below\015\012\015\012\015\012 ... Canon PowerShot A550 Digital Camera

When I use my tele converter, what dose the setting in the menu do? I don't see a difference whether I set it or not.


... Canon PowerShot G9 Digital Camera

Nikon d200 My pictures are coming out with red or yellow in it and I do the white balance with an expo disc. Did I do something wrong in the menu settings? I am shooting portraits with continuous lighting. What setting should I have my camera on? Also if you could give a good f stop and shutter speed for shooting kids that move alot - this is without a flash - using 500wt continuous lighting. Please help and Thank you - Thank you!!!!


Hello jenmardi,First, the fstop and shutter speed question ... For a lens of 70 mm I would use the manual with shutter speed at least 1/250 or 1/500, then the fstop I would set at 2.8 or just under this, no more than 4. You need as much l ... Nikon D200 Digital Camera with 18-200mm Lens

I want to know how to sync my D90 with an SB-600 flash for the best results.I want to know how my camera settings should be on ...rather could I get a break down of how to use the features of the custom menu settings.


... Nikon D90 Digital Camera with 16-85mm lens
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1367 seconds