Having problems with your Casio Exilim EX-Z57 Digital Camera ?

How can i fix my camera when its blurry and quickly switching itself of? when i switch on my camera,i dont see clearly then it turns off by itself in less than 30seconds...


Answers :

Fixing a Lens Error on a Digital Camera
\015\012
\015\012This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include “E18 lens error”, or “lens error, restart camera”. Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.
\015\012The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many Canon's, and NEVER use a case for this very reason.
\015\012A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.
\015\012Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.
\015\012The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:
\015\012Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.
\015\012Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.
\015\012Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.
\015\012Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.
\015\012Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in “no heat” setting, or sucking the gaps with a vacuum (careful with this one).
\015\012Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.
\015\012Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.
\015\012Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.
Repair Help & Product Troubleshooting for Casio Exilim EX-Z57 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How can i fix my camera when its blurry and quickly switching itself of? when i switch on my camera,i dont see clearly then it turns off by itself in less than 30seconds...


Fixing a Lens Error on a Digital Camera\015\012\015\012This has to be THE most common failure mode for a digit ... Casio Exilim EX-Z57 Digital Camera

What should do ,my LCD are all black, ill try to take a pictures and there is a a pictures which is clear! only the problem is my LCD turn to black and i dont see people when i taking pictures?? pls helpp


You need to replace the lcd, has a look here. ... Sony Cyber-shot DSC-W55 Digital Camera

Samsung sdc230 i have a samsung scd230 and when i turn it on ( on cam) i dont see anything but black and all lines in white but i dont see any images sometimes if i let it on for a while it will comes back to normal but a few days later the sames problems happen, my cam is about 3 to 4 years olds but i just took it a few times ,one wedding and a few other times it's still in a new condition , i dont know what to do with that if you can help me please do so


Your CCD is dead. i have met this problem. Your visor and tft screen work if you play a miniDV in your sdc230. In fact, no input image from your CCD. ... Digital Cameras

Fujifilm S5 Pro Camera laid still for 1 month not charged. Initially when turned on it refuse to see main original battery as charged. After cleaning of contacts-it saw it. Ok. Solved. But, main problem: Camera don't see no one from four 4Gb CF-cards, which it saw wonderfull before. Actually-raction on card inpup taking place-[-E-] changing to [ ]. But as You can see-no frame counting, and camera dont turning on with CF inside, only if it token out of camera. No idea how to solve and


Hi,\015\012\015\012If the card contacts is not perfectly seating on the card or if the card is corrupted you may get the E error, when you switch on the fuji camera..\015\012\015\012First connect the card to the C ... Digital Cameras

I have a kodak Z712IS, that is less than a year old and have taken less than 200 pics with it. when I turn it on the view screen is black. can see taken pics on review though. can only see subject of pic thru view finder when takining photo. not a battery problem. whuts up?


Please download new firmware:\015\012\015\012Connect the camera with the computer.\015\012Turn the camera on.\015\012Click onto the link and follow the instructions.\015\012 ... Kodak EasyShare Z712 Digital Camera

Blury pictures okay every time i ake pictures of myself i'd put it on self timer for 10 seconds and i pose and when i look at the picture it look alright from far put when i zom into myself you can see the little pixels like square pixels you can see them and when i upload them to my computer to see it big it like all like blury and square and i want to be able to be cleari dont know in the past i might of pressed a buton on the camera but when i bought it was really clear spent like 280 on it.


Make sure the megapixel is to full potential. somethimes ive seen them drop to smaller megapixel after a reset. ... Sony Cyber-shot DSC-S650 Digital Camera

I have two olympus 1010 camera's. Both have been dropped. The lens is patially open and the cover not fully closed. One will turn on so you can see through the LCD but only the top third of the field is visible. When photos are taken that is what shows up. Also it tries to focus but can't get it clear. The second powers up with information on the LCD but instead of seeing through the camera you see black. Phots can be taken but they too are black. What is wrong and what can be done to fix them?


I'll cover these separately:\015\012\015\012First camera may be as simple as the cover blocking part of the image, or it could be that part of the sensor is damaged. Sensor is the part inside the camera that light hits and converts to vo ... Digital Cameras

I see polarize trough my d7000, all of a sudden during a photoshoot i was seeing clear, and next shot was like polarized......and image was dark. Dont know what to do. Pleas HELP


Are you saying that the viewfinder is dark or 'frosty' ? ... Nikon D7000 Digital Camera

Hi I have panasonic Lumix DMC-FZ20 and when I start camera on the display it come with message "plz turn camera off and then on again." But it dont really do anything when restart occurs. It keep showing same message. Although it allow me to see old pics when started with play mode but dont start if the message has already on display. Moreover, when this message is on it wont allow me to work with any of the camera function including zoom in/out. . . Many Thanks . . .


Usually when this message pops up it indicates the lens position is jammed, you will need a camera technician to assess the item for repair cost. ... Panasonic Lumix DMC-FZ20 Digital Camera

Turn on the camera, the start screen shows up and slowly turns to black. I don't see a thing. I tried to take a picture and check it using card reader, I saw picture I took was very clear on my co


Hello, On the C743 this will require that the LCD unit be replaced. This will get very costly real quick unless you can do it yourself. Not much more I can tell you.Best Regards, Russell ... Kodak EasyShare C743 Digital Camera

White Screen Every time i turn my camera on i just see a white screen, the lens comes in and out perfectly but i cant see anything except white even when i press any button on the camera it still displays a white screen. But when I plug my camera into my computer it displlays the pictures clearly in colour and there is not a problem with them??


... Olympus FE-20 Digital Camera

Turn on the camera, the start screen shows up and slowly turns to black. I don't see a thing. I tried to take a picture and check it using card reader, I saw picture I took was very clear on my co


... Sanyo VPC-S500 Digital Camera

I have nikon D80 purchased about 1.5 yrs. ago. After taking less than 10 pictures, I see a flashing battery sign saying low in battery even when I had charged the battery full. If I turn the camera off and turn it back on, it will let me take more pictures. Is something wrong with the battery or is it my camerea?


Nice camera! I have one too, and really enjoy it. I suspect you are running the original firmware. There is a new firmware version 1.11 that specifically addresses this problem. The download and instruction page is below:Windows OS: ... Nikon D80 Digital Camera with 18-135mm Lens

Hi I have a minolta dimage A1, which has been working fine, but when I know turn it on, the screen, same through the view finder, just flickers, with no image shown, then white bars flicker on and off on the screen. This then clears after a while but the image is like a sorta washed out image, you can see a image but it is purple in colour and although you can pick out shapes you can't actually see anything???


Hi Anthony\015\012\015\012Sounds like your Minolta A1 has a faulty CCD sensor, this is a common problem and you should be able to get it fixed free of charge.\015\012\015\012You need to find your local Minolta repair agent, yo ... Digital Cameras

When i turn on my nikon d5000 and set it on manual the monitor turn blue. i dont know what happen i might change the setting accidentally and i cant bring it back to its original setting, i cant see the apperture anymore. pls help


You should still be able to see the aperture through the regular viewfinder. When you say 'blue', you mean the whole thing is just blue? No writing? If that is the case, try a fully charged battery, full reset and if no change, I hope it's still unde ... Nikon D5000 Digital Camera

I have a minolta Maxxum 700SI turn camera on and cant see anything through the shutter, and the word help keeps flashing off and on where you see the battery and film amount. I dont have a manual so I have no ideal what is wrong. It was working fine last week. Please help


Http://www.vikenk.com/manuals/minolta_maxxum_700si.zip\015\012\015\012Please download the maual from above link and save it to your compu ... Digital Cameras

The flash when i take a picture it doesnt flash, it just happened out of nowhere the flash just stopped working and i've been trying to see if maybe i turned the flash off some how but i dont even see a link for the flash, how do i get the flash back on?


You could try pressing the right button next to the zoom button, but usually when this happens, it is because the flash unit or transformer has died.Bob ... Fuji FinePix A500 Digital Camera

My screen is very dim, my pictures turn out clear and light but i cant see anything on the screen, even stored pictures. I have to put my memory card into a different camera or upload my pictures to see them. I dropped it lightly when it was OFF shortly before this started happening.


This problem is only related with back light in lcd screen and has nothing to do with ccd imager chip as explained by previous expert.LCD screen is not getting enough voltage to lit back light to show its image thus you get darker image. ... Canon PowerShot SD750 / IXUS 75 Digital Camera

Just purchased an powershot SX1 IS. I took one photo, zoomed in on it to see how clear the zoom was once taken a photo. THen it switched itself of with the lens still out. Now when turning it on it has a black screen and say lens error...restart camera. I have tried holding func. when turning on the camera and the time comes up on the screen. But as soon as I let go of func I get the error msg.


Hello if you just purchased this unit Then i advise you to take it back, this sounds like a system control issue or main board problem. Holding the function key while turning is factory reset, if this is not working right them the camera has a bad sy ... Canon PowerShot SX1 IS Digital Camera

I have an Olympus c-70 zoom digital cam and when I turn it on there is a blue window on the screen with a "card setup" writing. All what I can choose is "power off" or "format". My problem is that I've just arrived home from Mexico and there are lots of pics on the memory card. I can see them on the screen of my olympics but not able to convert theme onto my pc. How can I solve this problem? Thanks, Janos See less


Hi,You may way want to try and purchase a USB memory card reader. Like this one: ... Digital Cameras

I have the Kodak EasyShare V530 and every time i turn it on it gives me a message that says "camera error #E45 see user's guide" then it turns off. Unfortunately i dont have my user's guide. Is there any thing i can do to fix this?


Http://www.retrevo.com/search/v2/jsp/downloadPage.jsp?doc=21cc7420d5ae338b61a176f16d1146f3&modelid=200385&q=Kodak+V530Here is the link to download your manual.The error code indicates that there is a stuck lens issue. ... Digital Cameras

Blurry When i turn the camera on, the picture is blurry and i don't know how to make it clear again. I tried to take a picture and see if it cleared up; but it didn't


See front side of lens, i think its dirty or have finger prints. clean it. ... Sony Cybershot S650 Digital Camera

When i turn it on the lens go in and out in and out and when i see the screen its all blurry. i can still see the pictures i took clearly but i can take no more pictures without it coming out blury.


Hi\012 your unit has defective lens unit. it just need replacement. you can bring to local repair shop. they would charge around $ $45 to 75 depend on what they really want to charge.\012Thanks and best regard! ... Olympus FE-230 Digital Camera

I have an australian version of the canon digital ixus 70 camera and the bustards wont fix it cause they say it has sand in it ??they choose the easy way out this is still under waranty. Anyway the camera wont turn on on a fully charged battery the camera is just dead i cant see what sand has to do with it??? .after they take your money they dont want to know you???buy the way i am from australia any advise would be very thankfull bye


Ok try this, maybe they've got tired of taking easy money of $90 for the fix\015\012\015\012This is not a joke........\015\012Use a can of compressed air and blow around the lens while it is extended. Even if the lens wont extend st ... Digital Cameras

My camera don't switch on,when i turn it on you sometimes hear the lens starts to zoom but nothing else happen. We checked the batterys etc with my friends camera and its fine so i dont know.The last few photo that was taken,i notised that that some of the pictures was'nt correct in focus so does it make something clear to you? Thanx for your support


Indien ek die fokken kamera wil wegstuur sal ek betaal,dink jy nou regtig ek sal jou oor die R100 betaal om vir my klomp kak te vertel oor die email en as ek hom nie regkry is jy fort met my geld.....kak man....!! ... Fujitsu Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3162 seconds