Having problems with your Casio Exilim EX-Z77 Digital Camera ?

I dropped my casio exilim 7.2 mega pixels digital camera EX-Z77 while the lens was out. The lens does not appear to be bent or damaged but reports a lens error and will not turn on and the lens will not go all the way in. What do I do?

Answers :

Fixing a Lens Error on a Digital Camera


This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart camera". Some cameras might show nothing at all, but merely make a beeping noise as the lens goes out, then in, then the camera shuts off. Sometimes the lens won't even move.

The problem is actually quite common throughout all camera brands. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended. Believe it or not, one BIG contributor to lens errors is using a camera case. Sand, gunk, case fibers, etc... accumulate at the bottom of the case. These materials love to cling to the camera by electrostatic build-up from the camera rubbing against the side of the case (especially those cases with soft fibrous intreriors). Once these materials work their way into the lens mechanism, that's all she wrote. I have many cameras, and NEVER use a case for this very reason.

A camera owner that suffers this problem may have no recourse for having the camera repaired. Many camera makers will not honor repairing this problem under warranty as they claim it is due to impact damage to the camera, or sand or debris getting into the lens gearing mechanism (neither of which is covered under warranty). The quoted repair cost is usually close to or more than what the camera is actually worth.

Fortunately, about half the cameras that suffer this failure can easily be fixed by one of the following methods. None of these methods involve opening the camera, although some have potential to cause other damage to the camera if excessively done. If the camera is still under warranty, before trying any of these, please please first contact your camera's maker to see if they'll cover the repair, or to determine how much they'll charge for the repair. Who knows, you might get lucky. But if they quote you a number that's higher than the value of your camera, you may want to consider the following methods.

The methods are listed in the order of risk of damaging your camera. Thus make sure you try them in the listed order. And remember, these fixes (especially #6 and 7) should only be considered for a camera that's out of warranty, who's cost of repair would be excessive, and would otherwise be considered for disposal if unrepaired:

Fix #1: Remove the batteries from the camera, wait a few minutes. Put a fresh set of batteries back in (preferably rechargeable NiMH 2500mah or better) and turn the camera on. If that didn't work, try pressing and holding the Function or OK button while turning the camera on.

Fix #2: Remove the batteries, then remove the memory card. Then install new batteries, and turn on the camera. If you get an Error E30, it means you don't have a memory card installed, so turn it off, slip in the memory card and turn it on one last time.

Fix #3: Insert the cameras Audio/Video (AV) cable, and turn the camera on. Inserting this cable ensures that the camera's LCD screen remains off during the start process. Thus extra battery power is available to the camera's lens motor during startup. This extra power can be useful in overcoming grit or sand particals that may be jamming the lens. If the AV cable doesn't fix the lens error by itself, consider keeping this cable installed while trying fixes 4, 5, and 7 as a means to provide extra help to these fixes. But note that I DON'T recommend keeping the cable installed during Fix 6 as you may damage the AV port while tapping the camera. Reinsert the cable only AFTER tapping the camera.

Fix #4: Place the camera flat on its back on a table, pointed at the ceiling. Press and hold the shutter button down, and at the same time press the power-on button. The idea is that the camera will try to autofocus while the lens is extending, hopefully seating the lens barrel guide pins in their slots.

Fix #5: Blow compressed air in the gaps around the lens barrels with the idea of blowing out any sand or grit that may be in there jamming the lens. Other variations include blowing with a hair dryer in "no heat" setting, or sucking the gaps with a vacuum (careful with this one).

Now we're entering into the realm of potentially damaging your camera in conducting the fix. There is definitely some risk here, so take care when conducting the following two fixes.

Fix #6: Repeatedly tap the padded/rubber usb cover on a hard surface with the intent of dislodging any particles that may be jamming the lens. Other variations include hitting a side of the camera against the palm of your hand. A lot of people have reported success with this method. HOWEVER, there is also some potential for damaging or dislodging internal components with this method, such as unseating ribbon cables, or cracking LCD screens.

Fix #7: Try forcing the lens. More people have reported success with this method than with any of the other methods. HOWEVER, there's obviously some potential for damaging your camera by using this method. Variations include gently pulling, rotating, and/or twisting the lens barrel while hitting the power button. Attempt to gently straighten or align the barrel if it's crooked or twisted. Another variation includes looking for uneven gaps around the lens barrel, and then pushing on the side of the lens barrel that has the largest gap (note pushing the lens barrel all the way in is NOT recommended as it may become stuck there). While doing any of the above, listen for a click that indicates that the lens barrel guide pins may have reseated in their guide slots. If you hear this click, immediately stop and try the camera.

Repair Help & Product Troubleshooting for Casio Exilim EX-Z77 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I dropped my casio exilim 7.2 mega pixels digital camera EX-Z77 while the lens was out. The lens does not appear to be bent or damaged but reports a lens error and will not turn on and the lens will not go all the way in. What do I do?

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digi ... Casio Exilim EX-Z77 Digital Camera

Lens problems I recently purchased a Kodak Z7590. I have only used it a couple times. My daughter set it on the couch (still on). When I sat down beside of it the camera slid down behind the cushion. I didn't notice it till I stood up. Now the lens will not retract. The lens appears to be extended all the way and has a slight tilt to it. When it is turned on it sounds like it is trying to work, same when it's turned off. I tried to twist the lens as it was powering on and off to get it t

This is a simple fix. Take the lens and with slight pressure, pens the lens until it's straight. It will make a clicking sounds and lens is lined up and will retract. ... Kodak EasyShare Z7590 Digital Camera

On my Fuji s2000hd I have a zoom error, the screen is black and I can't take pictures. The lens will not zoom out. I believe that my husband put the lens cap back on before the lens had gone all the way in when he turned it off but I am not positive that is the problem. The lens seem centered and there doesn't appear to be anything blocking it from coming out. Is there a way to fix this?

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that you will have to get it fixed by a p ... Fuji FinePix S2000hd Digital Camera

The camera will not turn on after being dropped. When I switch it from off to on, the green power LED flashes briefly. The lens does not move or attempt to extend. The LCD backlight does not illuminate. The LCD appears to be slightly damaged: there is some slight non-uniformity visible when I shine a strong light on it. Otherwise the camera shows no sign of damage. Is it possible that the damaged LCD is preventing the camera from turning on? Is there a hard reset procedure I should try? I've t

I have the same problem. Can someone advice ... Panasonic Lumix DMC-ZS3 Digital Camera

When switched on the camera tries to open the lens. It is clearly being obstructed in some way, and after three attempts closes down with the message "Please turn camera off and on again". If tapped gently sometimes the lens will open, and if the lens is caught and encouraged to stay out then ooccasionally the camera opens as normal. If the lens does stay open the camera appears to function as normal.

Fixing a Lens Error on a Digital Camera This has to be THE most common failure mode for a digital camera. Some common error messages that might show up on the LCD's of cameras with this problem include "E18 lens error", or "lens error, restart ... Panasonic Lumix DMC-FS5 Digital Camera

Nikon Coolpix s220...Lens Error. Camera was dropped from like 5 inches. Immediately received the error message screen. The lens is stuck all the way out...I have tried to do some of the above and while twisting the lens slightly got it to take pictures again, I think it may have done more damage because its still makes a buzzing noise when I turn it on and there is black on a portion of the screen like the cover is partially stuck (inside the camera).

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Nikon Coolpix 2200 Digital Camera

Samsung L730 My camera appears to be stuck. The lens usually pops out when it is turned on. However, when I turned it off today, it remained out. I tried removing the memory card and battery. Also, it won't turn off unless I remove the battery. When it is on, the screen is black and the usual green light goes off after initially pressing the power button. Is there a way to reset it?

This camera would have to be tested more, but it sounds like a ccd or sensor problem. If this camera was made around the year 2000 or after a bit, then it could be a ccd problem common with many Sony made ccds in this period.A loose conne ... Samsung Digimax L730 Digital Camera

I have a Samsung L100. Its only a couple of months old and its never been dropped or damaged. When I turn it on, the power button turns blue, the lens opens, then it beeps two or three times and the shuts down - except that the blue light stays on. You can't use it and it you can't turn it off all the way without pulling the battery out. The screen doesn't light up or anything. The camera is totally useless now. I've found a few reviews online that say theirs do the same thing. Is there a

... Digital Cameras

Lens Error When I turn on the camera in any mode except play back, the lens will come out as if it's coming on but then the lens' go back in and the camera shuts down. The batteries are fully charged and the camera has not been damaged in any way.

I am sorry to say but you have a physical issue with the camera. Your either going to have to take the camera apart yourself or bring it in for service. Try working with their support \015\012\011\011\011\011\011\015\012\011\011\0 ... General Electric A835 Digital Camera

Pretty much constant but sometimes intermittant problem of the camera fe-210 screen goes black. all functions appear to be normal but it does not see through the lens. So everything is black on the pictures taken. It's like the opening is shut. Sometimes it will work when first turned on for one or maybe two exposures. then it goes black and may stay that way even if turned on and off or changing any of the settings.

Hi,Would you be able to View Recorded images / Video's ?If\015\012\015\012\015\012 yes, this is a Faulty CCD Sensor. This is a Common Problem on almost \015\012all the Brands like Sony, Kodak, Canon. There were Certain Recalls ... Olympus FE-210 Digital Camera

Ruined Screen My friend's screen is ruined. When it's off you can see some damage or something on the screen. When I turn it on I get this. http://i31.photobucket.com/albums/c386/Judas_Iscariot_X8792/Camwithbrokescrean.png Also the lens doesn't "grow" out like it should when you turn it on. It hasn't been dropped in water, nor has it fallen to the ground and broke that way. Does anyone know if this can be fixed. I also don't know if this cam is under warranty.

Kodak has a web site where you can enter the serial number and check warranty status, if it is less than a year old and has been registered it is possible it will be covered. This is just a guess on my part. ... Kodak EasyShare M853 Digital Camera

I have a new (Dec., 2009) D90. This morning I discovered that I had an "Err" message and a "CHA" message. Both were on the LCD panel on the top of the camera. I was not able to turn the camera off, and the only way to turn it off was to take out the battery. Upon reinserting the battery, everything appeared normal, but after taking one shot the problem reappeared. The interesting thing was that I took the camera body to a Nikon certified shop in New York, and they tried it with a different lens,

The Nikon user manual says on Page 256 that the ERR message indicates a camera malfunction and to clear it, you must release the shutter. \012\012 I have found on my D-90 that I can usually release the shutter by turning the camera off and ba ... Nikon D90 Digital Camera with 18-105mm lens

Shutter damaged when camera was dropped, appears to be distorted, error message when turned on. lens and body appear undamaged. Can this component be easily replaced?

Hi,This is a Tedious Job. You need to Dissemble the Camera and then replace this. This is Not An Easy Task. But, if you could replace that, it's still worth a shot.Again, it depends on the Age of the Camera. If you send it for ... Digital Cameras

Same problem I have exactly the same problem. It appeared suddenly, I just turned it on once and the lens started protracting and retracting followed by the message ''turn camera off and then on again''. There is no physical damage to the camera. Did anyone get to fix it?

There might not be a physical damage outside which will be easily noticeable but it if you have dropped it once hard the lens array which is a sensitive part gets defective. try tapping on the device while the camera is switched on. if it works then ... Panasonic Lumix DMC-LZ7 Digital Camera

My nikon coolpix s710 makes a buzzing tone and says "lens error" in red on a white screen when I turn it on. The lens itself appears to not be fully out nor fully flat against the camera. Is there any way I can fix this myself? If not, where can I go to fix this problem?

HelloThank you for using FixYa for your problemAlways check the batteries first, even try a feash set but if is it still giving the same fault, your camera is faulty. It should be taken to an authorized repa ... Nikon COOLPIX S710 Digital Camera

I have a Nikon Coolpix L14. I have had it for a while but it hasn't been used very often. I took it to the beach one day, in a plastic bag, and a few grains of sand made their way into the bag. Now, I keep getting lens error when I turn the the camera on it extends partially, makes a noise, and then retracts and on the screen 'lens error' appears. And yes , I HAVE tried compressed air, it didn't work

HelloThe problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the \012probability is that ... Nikon Coolpix L14 Digital Camera

Hi I have a Panansonic Lumix - DMC-FS25. My camera has now developed a fault with the lens which won't go back in. When I turn it on the lens zooms all the way out and then back in again and a message appears saying - System Error (Zoom). Any help would be greatly appreciated, Many thanks Graham

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Panasonic Lumix DMC-FZ20 Digital Camera

I have a Canon Powershot S3 IS and I was looking at picture I had taken and the lens was retracted. I switched to the camera mode and the lens started to come out and hit my leg and stopped half way. The lens went dark. I turned it off to retract the lens and then turned it back on. The lens came all the way out but the screen is still black and I could feel the camera and just barely hear it making the noise it makes when the lens is coming out but it was already all the way out. I switche

Format ur memory card ....and replace the cells.....might work...contact the customer care for help ..they mightr be able to fix it ... ... Digital Cameras

My Camera (Nikon Coolpix S3000) broke because I dropped it while the lens was extended out... and the lens hit the ground. Now when I try to straighten out the lens, I turn the camera on and off, and when it turns off, the lens doesn't go in all the way, and when I turn it on, the lens goes extends out, but immediatley goes back in again!! (but not all the way) I am lost, and extremley disappointed. Please help.

HelloThank you for using FIXYA!!!This\012 is a suggestion. If you do not feel comfortable trying it, you will ne ... Nikon Coolpix S3000 Digital Camera

The lens that extends when you turn the camera on will not extend the whole way and so it shuts the camera down. Any ideas on a fix for this without damaging the camera more? rnThanx so much in advance, I appreciate the help!!!!

Good day,This tip will explain a few methods on how to try and fix your lens if it is stuck or you get a lens error on your screen.Please\012 note that all these methods are used at the users own risk and that I \0 ... Olympus X-42 Digital Camera

I have a DMC-TZ5. The lens cover mechanism ("barrier") has become "sticky," and now requires an occasional very gentle tap to get open when the camera is turned on. The problem is intermittent and not predictable. The mechanism has NOT been bent or otherwise injured. I have been careful not to damage it. Any suggestions for getting it to work correctly. I've tried flushing out the mechanism with compressed air and that hasn't solved it.

Hi,\015\012\015\012The internal mechanism is stuck and causing this problem. You can't do anything from your end. You need to take to service center to get it repaired.\015\012\015\012Hope this helps.\015\012\015\ ... Digital Cameras

I had the problem where it was slightly bent and it wont turn on. Now my Pentax Optio M40 is stuck in a way that the lens won't open,

Fixing a Lens Error on a Digital Camera\012\012This has to be THE most common failure mode for a digital camer ... Pentax Optio M40 Digital Camera

My Canon PowerShot S400 shows a blurred image on my screen, one that looks like streaks of light. As I pan the camera the streaks move, too. Sometimes, but not consistently, when I take a photo there are streaks on the resultant image, often greenish blue. Here's something else: When I turn the camera on, the lens opens with a series of small clicks, such as might happen if the lenses have been damaged in some way.

It is definitely a CCD issue. First of all how long have you owned the camera? I am guessing it is out of warranty so in most cases it is the best option to purchase a replacement as you will be able to get one twice as good for about as much as the ... Digital Cameras

I have a Nikon S710. The camera appears to lock up and the only way to reset is to remove the battery. When the battery is reinserted the lens retracts. There does not seem to be a reason for the lockup. Has anyone else reported the error?

Took the camera back to Nikon and they fixed it ... Nikon Digital Cameras

LENS PROBLEM Lens keeps zooming in and out when I turn it on. After 4 times, the lens goes back in and it says on the screen, "Turn the power off and on again". Then it does the same thing when I turn it off and back on. Also, the shutter is not closing however it's also not all the way open. Almost half way but more open than closed. Please help!!!

The slightly open shutter is the reason for this problem. Thank God you mentioned it. \015\012Solution: Try with your fingers to shift the shutter “blades” back and forth to see if they move freely. If they do no move freely it maen ... Sony Cybershot DSCW80 7.2MP Digital Camera with 3x Optical Zoom and Super Steady Shot
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2734 seconds