Having problems with your Casio Exilim EXZ75 Digital Camera ?

Everytime camera is turned on I have to go thru all start ups..language, world setting, city setting etc



Answers :

Repair Help & Product Troubleshooting for Casio Exilim EXZ75 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Everytime camera is turned on I have to go thru all start ups..language, world setting, city setting etc


... Casio Exilim EXZ75 Digital Camera

Camera shuts down after shutter button is pressed. It shuts down halfway through the shutter operation. Everything else works fine-reviewing pictures, settings in menu, focusing, exposure settings etc. The camera focuses ok when the shutter button is half pressed then when you press the shutter button fully, the mirror goes up, shutter appears to open then the camera shuts down with no power. Only way to get mirror etc back to normal is to remove the battery and refit. When camera is turned b


... Canon EOS 40D Digital Camera

Panasonic DMC-LS2 camera. Whenever I turn the camera on to take a picture it says turn it off and then on again. I have changed batteries, etc. I can look at the pictures stored in the camera, change settings, etc. but when it comes to taking a picture no go.


Is the lens extending at all? There may be some grit stopping the lens extending. Remove all cards, save any photos stored on the camera then enter the menu and perform a reset on the camera. Report back on the above please. ... Panasonic Digital Cameras

Each time I turn the camera on I set it to (P) and set the sound, resolution, etc. but when I turn it off and the on again it resets to the initial settings including language, sounds, etc. is that a firmaware issue or what?


Try to save your setting as your default setting.. ... Digital Cameras

Every time I turn my camera on it asks me to set the time zone, area I am in, date, etc...again. It's causing problems when I download pictures. They're all out of order. Even when I reset the date, time, etc. it always asks me to reset it every single time I turn on my camera.


... Canon PowerShot S400 / IXUS 400 Digital Camera

When I turn on my Olympus FE-190 camera it shows the "card setup" screen with two choices: Power Off (highlighted) or Format, and gives a 3-ring alert sound. (It does this no matter what is set on the program dial: auto, guide, etc.) If I press OK to "set" with Power Off highlighted, it turns off. If I highlight format and press OK of course it warns me I'll be reformatting the XD card. When I attach the usb cable the screen on the camera shows PC highlighted but when I press OK it says "one mom


Fixed it by reseating the xD card. Voila! Back to normal. ... Olympus Digital Cameras

How do I set the start image? I've tried following the menu commands, but when I select "Start Image," my options are the logo, "off," and then a black box with a question mark. I've selected it, and it shows the option set for "user image," but no start image shows up when I turn the camera on.


After going through the menu and choosing user image, view the picture you would like to set as your start image. Press the button with the E on it that is underneath the zoom button. The screen should then show four images across the top, say the wo ... Samsung L200 Digital Camera

Blurry pictures I've had this camera for almost a year and everytime I want good pictures (vacation, birthdays, xmas) I'm disappointed with the quality of my pictures. So many of my pictures turn out blurry. And sometimes they'll look fine when reviewing on the camera, but when downloaded to my computer, the quality is poor. Some people say they keep their's on the auto setting, I find I need to keep mine on the nighttime setting to get decent pictures. Any sugggestions with settings, etc to hel


Try turning of the stabilizer if you have one it will be in the settings menu ... Canon PowerShot SD1000 Digital Camera

I am new to the video world and just purchased a Canon HF S200 from a guy here locally it is used but looked to be in great condition and working properly. But less than 15 minutes after the purchase and only transporting the camera in my car, when I powered the camera on everthing seemed to work properly except the rotating LCD screen would not come on unless you turn it 180 degrees counter clockwise it comes on and works properly. If you start to turn it back it goes off again. When I turn the


Have you got the user manual? If not, you can download it from www.iusermanual.com.I am not familiar with you videocam but the mannual shows all of the buttons and functio ... Digital Cameras

I'm not sure what is relevant and what isn't but... Two days ago I tried taking a picture on my timer and all of them came out blurry. I wasn't sure why this was so I started poking around on the camera and decided to reset all factory settings. Then that evening I tried to upload my pictures to my computer as usual. The software (Picasa) locked up. I tried taking the camera out of the cradle and turning it on but it wouldn't turn on. I rebooted my computer and tried turing the camera on


Sometimes a camera software upgrade will help, but it is hard to find software online. I first would look on manufacture's website to see if there is any driver updates you can download to your pc, then do the same with picasa software. Also make sur ... Digital Cameras

Problem with my t1035 polaroid display screen camera. I charged battery, refomatted memory card, and reset camera to factory settings and it still blinks orange very quickly at start up then says "goodbye" and turns off without any error code or reason why it is turning off. Please help


Sorry this isn't a solution, but i have the same problem. have you solved the problem yet? ... Polaroid i1035 Digital Camera

FujiFilm S5500 When I turn on camera all my settings are gone, presumably defaulted to factory setting. I guess the camera's internal battery is flat or otherwise dead. can I replace same, what is it. I have all manner of soldering irons, and drivers etc to fit almost anything with a screw. I appreciate it could be a ticklish job, but have spent years as an elec engineer with Fisons Scientific, so shouldn't be a problem. regards, chris catton


I'm sorry for the difficulties you're experiencing in using the Camera. According to the information available from the manufacturer, it appears that there is no such battery available to keep the date and time and other settings. Hence it is ... Digital Cameras

Canon SD600 I used my camera to take pictures of fireworks and I noticed that afterwards, all the photos I was taking outside in daylight were turning white. If I take pictures in the dark, they turn out perfect, and low light pictures are fairly normal except anywhere where there is a light source (lamp, window, etc) the color is streaky and orange. This particular camera has no way to adjust the aperture settings and I am considering taking it to a shop to have it looked at. Is there anything


It sounds like you may be in a low light mode. Put the camera in record mode, and then press the set button (in the middle of the up down left right keys). You probably want the camera to be in automatic mode (or A). If this doesn't solve the prob ... Canon PowerShot SD600 Digital Camera

I have a Sony Cybershot DSC-P92 and it always has been working properly untill today. When I inserted a fresh pair of charged batteries the powerlight immediatly comes on, even before I turned the camera on. When I press the powerbutton and the camera starts I have to re-set the date, which is odd. After that done and ready for use the flash doesn't go off and it starts beeping and displays an error message: E:91.01 Is this problem fixable or should I throw it out of the window (metaforica


Haven't I wanted to Throw it out the window before as well. That was a good chuckle but no you don't need to do that, what's happened is that the internal battery the one that keep the day date time and anything else programed into the camera alive w ... Sony Cyber-Shot DSC-P92 Digital Camera

Camera problems I can see the different setting symbols on the screen and when I turn it off and on I can see the canon pic it shows upon coming on. However, when I take a pictures I can no longer see the picture I am taken on the screen and although it appears to have taken the picture the picture turned out black. This starting taking place after my husband changed my settings I cannot figure out what to do to change it back. Please help.


This definitely sounds like a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info: \015\ ... Canon PowerShot A85 Digital Camera

Settings My camera will not keep the settings.  When the camera turns off I have to reset the language, place, date, time, etc.  Can this be fixed?


Give the following a try:How do I maintain the settings when I Power ON/OFF my Casio digital camera? Turn the camera ON and switch to REC. Press the MENU button. Using the controller, scroll to the Memory tab. ... Casio Exilim EXZ75 Digital Camera

Camera Canon A710 IS started to ask set time date when turned on


When the camera is left without power for an extended period of time, the time and date settings are gone. You need to reset them and when you're finished, click the set/ok button twice. ... Canon PowerShot A710 IS Digital Camera

The date will not stay set. Every time we turn the camera on it opens with the date screen. We set the date and it then goes into shoot mode but the date is not set. All pictures are stamped with the default start date. Tried a new battery already.


To keep the date on, you have to leave the camera off with a charged battery for 24 hous to charge the inner battery that keeps date on. If this doesn´t solve the problem then is because the inner battery won´t charge anymore, but it wil ... Sony Cyber-shot DSC-W120 Digital Camera

My camera displays E18 on the lower left hand corner no other operation I turned the camera on the lens deployed and it intitiated OK but I can hear some activity such as motor etc. but after 10-20 sec it dipslays E18. I can view pictures, set up the camera but the moment I try to activate the caera function it goes into this routine. The lens now is stuck in the deployed position. I removed the batteries (Energizer Lithium), checked them they are good?


... Canon PowerShot S2 IS Digital Camera

The display on my Ixus 500 has gone blank. It started to show weird colours when switched on but turning it off then on returned the display to normal. I knocked the camera the other day and the display is now blank both in camera mode and picture review mode. The camera makes the usual noises when selecting Menu etc. It also save picture to the memory card. Is it worth taking it to bits to look for a loose connection?


This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot SD100 / IXUS II Digital Camera

Have been given a FinePix A330 camera with no instructions - cords etc. and have it sort of working, but can't find out how to turn it off. Everytime I try, it takes a photo. Was given a 2gb. XD card, but it will not work - says it is not formatted. I now have a 16mg. card and it works. Have the date set, but need to be able to turn it off without waiting for it to turn itself off. Thank you, Nat Morgan


You can download the user manual from the following site: http://www.retrevo.com/support/FujiFilm-A330-Digital-Cameras-manual/id/200ci271/t/2/Look for instructions in the manual. ... Fuji FinePix A330 Digital Camera

Black screen Turn on the camera, the start screen shows up, then it turns black when ready to get pictures taken. Tried going through all menus, can see all menus just fine, didnt mess with anything. Tried every setting, still, nothing. Also, can see all saved pictures, and the other lens was cleaned off.


Try cycling through the Display button until you're able to view photo to be taken. ... Sanyo VPC-S500 Digital Camera

So...I want to connect my Casio Ex-s5 to my PC. The manual instructions say: turn on the camera, press Menu, then set-up tab. I don't see a set-up tab, only an "easy menu" with 5 optinos (FLash, self-timer, image size, etc). Where is the setup tab?


Try NOT connecting your camera to your computer.\012\012\012The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the c ... Casio Exilim EX-S500 Digital Camera

Color problem The same issue as the one who asked about the color problem. We bought this Olympus FE-280 Digital Camera March 2008 i think. It started to have this color problem last month which is April. The problem is whenever I turn on the camera the screen has this red violet color and it doesn't capture good photos. What do you think is the problem? How can I solve this? I already tried removing the battery and the memory card and tried changing the settings but still it never changes. Help


Try to see if a filter is activated like magenta ...look in the menu if there is a reset settings feature...Usually it is in the main menu..one that reset it to the factory settings ..there can not be any other thing but something from the settings a ... Olympus FE-280 Digital Camera

I have a Canon Powershot Digital camera just over 1 year and we turned it on the screen is all black now(started out 1/2 black-it flashes but no picture is taken- all settings are as they have been since we bought this camera from BestBuy. This is the 2nd Canon Powershot we bought in the past 3 1/2 years & it will be the last one. Can you tell me what I can try to get this fixed? Thank you. Karen from NC


Test ... Canon PowerShot A85 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4297 seconds