Having problems with your Casio EXILIM ZOOM EX-Z600 Digital Camera ?
Menu constantly displays
\015 When I start my camera, it goes through the entire new set-up options (time, date, location etc) even though I've filled them in previously. I complete them again and it's fine until I switch it off and on again, and the problem starts all over again...thus meaning all my photo's are listed as being taken on the same day etc. It has only recently started happening.\015
Repair Help & Product Troubleshooting for Casio EXILIM ZOOM EX-Z600 Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Faulty d40x hi i bought a d40x off ebay the other day and couldnt wait to start snapping.... problems: - The error message "initialization error. Turn camera on and off again" appears. Upon turning the camera off and on again, the same message appears. After several times trying it still does not work. Also, the menu screen appears, and just keeps flicking from menu to menu constantly. As well as this, on the playback mode, the picture of the image displayed keeps zooming in as far as
I would start by looking at all of the push buttons on the camera. One may be stuck down. ... Nikon D40x Digital Camera
Menu constantly displays
... Casio EXILIM ZOOM EX-Z600 Digital Camera
Hi, My pentax optio WP don't work anymore. When i switch it on, it stops after 5 seconds. If i start it in read mode (blue button pressed whil i switch it on), it works, but the menu button dont't work and displays a yellow lock on the top of the screen. If i switch it on with the menu btton pressed, it displays ver 1.00 before to stop after 5 seconds If i switch it on with the menu and the blue btton pressed, it displays ver 36, then xxx test xxx and v 866-76 , 1.0001 before to stop after 5 sec
Some of those buttons work in combination with the two dials (i.e., setting ISO and white balance, etc.). Hold a buttin down and user the knobs simoultaneously.If this is not the issue, please describe specifically which buttons are not workin. ... Pentax Digital Cameras
Canon Powershot S1 IS has blurred image on both flip display and internal display (identical); menu graphics display fine, menu functionality (changing options) diplays and works fine.
Your Canon S1 IS has problem of CCD Imager Sensor and need to be replaced.Canon has announced free of cost repair scheme for such problem in S1 IS model.Click ... Digital Cameras
LCD monitor works to display picture already taken and the menu display, but with not display live images. Must use the view finder. Menu does not have a "live view"
There is no function to do this on the EOS 400D. Don't forget the camera is an SLR and still has to open and close a shutter to take a picture. The image is then converted using a CCD instead of exposed on film. I find with my 20D I just take loads o ... Canon EOS 400D / Rebel XTi Digital Camera
My Samsung TL220 lens won't close. It doesn't display an image on the front or the back. However, when I trigger the menu, the lcd displays "No Image File". It does go through and displays all the different menu options, so the lcd must be o.k. Could this be fixed with software or software update or do you think this is a hardware problem? ( I've noticed several TL220 that have this problem.) Is it an easy fix & how much do you think it would take to fix? Thank you.
Well, there must be a setting that was unintentionally set. First, I need you to try restoring the camera to its default settings. Go to Menu settings and then choose Reset. Let me know if this works or not so that we can move forward to other fixe ... Samsung DualView TL220 Digital Camera
Mitsuba DV55F Hello. I have the Mitsuba DV55F camera and am having problems with it. The power is staying on constantly and won't power off and the start up menu (welcome) constantly stays on and won't let me go into the modes or menu options. I have charged the battery fully and still having the same problem. Can you help me??? Thanks, email@example.com Jen
... Mitsuba DV505 Digital Camera
My camera taks picture but i cant see them on display..the display is black but when i press the menu button i can see the menu..do i have a problem with the lenss?
Hi, I have the same issue with this camera and Fuji suggested that it could be the sensor fault. Strange to see that you had my same problem at the same date of mine. Did you get a solution or managed to see if there is a Sensor recal like for many o ... Fuji FinePix A820 Digital Camera
Nikon d70 There is no display on the monitor screen. When I press menu the screen turns white. No menu items and no photos are displayed. I aso note that the date has gone wrong - gives 2004-date for photos taken today when I read memory card on my laptop.
... Nikon D70 Digital Camera
The menus of my Lumix FZ10 are displaying in strange way. When I buy the camera (3 month ago) the menu display as seen on the manual. It whas OK , but now I habe a curious menu with only very few functions.
It's likely that there are settings on the camera that change the menu style - my Panasonic lets me reorganize the menus and change the way they look.Here's the manual: ... Panasonic Lumix DMC-FZ10 Digital Camera
In my nikon d50, after I take a photo (when it displays) on the screen), it is covered with a semi-transparent menu of details about the photo. Not a histogram, but a text display with items like the date the photo was taken. Or it displays 4 small numbered thumbnails. When I click enter, I zoom. I just want the REGULAR display mode.
Press up/down on the multiselector until you get the view you want. ... Nikon Digital Cameras
Camera repair The LCD display is white with red lines going through it. Even the viewfinder does the same thing -- white. When I hit the view button, the same thing sometimes. It seems to do worse outside. You can faintly see the pictures I took in the LCD display. Now the LCD display is totally black. What's wrong. The menu display still works. What can I do?
Time for a new Camera. It is about 150.00 to replace the LCD. it is cheaper to replace it unless you can just use the viewfinder alone!! ... Kodak EasyShare Z612 Digital Camera
Display problem Hello, I've had my SD1000 for less than 3 months. Sometimes the display goes black, I can still access the menu options and if I slide the button to review images they will display on the LCD panel. But even if I've just powered it on, the LCD is black, if I take a picture anyway, the picture is also black. Sometimes if I turn on the camera and turn it off again a few times it starts displaying correctly again. Is there a hardware problem with my camera or is this something I sho
I had the same problem with my SD1000 and was so frustrated with reading all of the troubleshooting "solutions".... After a couple of days researching, I finally stumbled upon a site that actually suggested turning the unit off and "slapping" it a c ... Canon PowerShot SD1000 Digital Camera
LCD screen displays menu items but will not display picture capture & won't take pictures
A very common problem with many Digital cameras. It sounds as if you are suffering from either a CCD problem or a video board problem. Impossible to tell without it being on the bench to check.\015\012\015\012You could dismantle it and check there's ... HP Photosmart M307 Digital Camera
When turning on my Panasonic Hx-DC1 camcorder there is no Menu. Pressing the 'Menu' button does not display the menu options.
It's likely the ribbon cable on the main board is dislodge, you need to take the whole unit apart, if your carefull its not to bad to disassemble, you need to take out the side panel, under the power board, the one with a big black capacitor, you nee ... Digital Cameras
Focus problems Hi, my camera is not focusing clearly. We just used it recently and can look at clear pictures on the display screen but now when we go to actually take a picture it's blury (on the display screen and if a picture is taken). I also notice that all these different setting menu's come up on the display screen when we are in take picture mode. I took it in today and they said the lens could have been bumped or that their is something wrong with the focusing inside. So they would hav
This sounds like it might be a defective CCD imager. If so, Canon should fix this for you for free, including free shipping both ways. This is regardless of your camera's warranty status. Please check the following two links for more info:\015\ ... Canon PowerShot SD100 / IXUS II Digital Camera
Picture camera display Nikon aw110 is not working. When you want to shoot a movie however, the display is shown. When you want to return back from this to menu or to shoot a picture, display is black again. This camera is new and has only been used once. How can this problem be solved?
... Nikon COOLPIX AW110 Digital Camera Camouflage
Hi, i have a sony alpha DSLR- A200 that is working well but now i can't get the menu display to work - when i take a picture i can quickly see the play back on the lcd monitor but if i press play or menu nothing appears on the lcd monitor. Then menu usually will show me battery life, etc but I can't find any of that..I have tried recharging the battery, removing and re-inserting the battery and the memory card and no luck. I can take photos and download them I just can't review anything on the
... Sony Alpha DSLR-A200 Digital Camera
I have new Canon 500d but i can't work out the LCD screen to display my live view to shoot. The screen displays only the Menu or the Shooting Settings Display. i have the same problems with Rina, Thanks Jun
I wish you know that you need to press LIVEVIEW button marked red Dot to\015\012 enter live view mode.Further more it will work in P,T,A,M modes and\015\012 video camera modes only.Still it does not show live view the camera has\015\012 a fault ... Canon EOS 500D / Digital Rebel T1i Digital Camera
Dear Camera expert, I bought a brand new Nikon dslr D80 a few weeks ago. From day one I tried to know the Camera, I found problem when I go to cameras "custom setting menu" at rear screen. It displays No memory card? Lock. Whereas there is always a memory card. No. of shots are erratic: Some times there is one shot and no shot further and No memory card display remains on rear screen. Sometimes I am able to take more shots but problen of No memory card display remains Regards, Ja
Hi,I know this is really irritating display and this is a common problem with canon and nikon camera's.Turning off this little annoying feature can be easy or challenging, depending on which camera system you are using.For ... Nikon D80 Body Only Digital Camera
Can't get a picture on the screen - just shows black. When we turn the camera on the LCD screen displays the function choices and menu options, but will not display any image. If we take a picture using the view finder and then check for the image, nothing is displayed. We just checked the memory card, and it doesn't even take a photo. All we got was black. Any suggestions?
Check the SD card, they have sliders on them which lets you "lock" the card so nothing can be put on or taken off of it. Make sure that is off. Then go through the menu on the camera and try to format the card again. If the card is bad it should give ... Canon Powershot A1000IS 10MP Digital Camera with 4x Optical Image Stabilized Zoom
The display on my Ixus 500 has gone blank. It started to show weird colours when switched on but turning it off then on returned the display to normal. I knocked the camera the other day and the display is now blank both in camera mode and picture review mode. The camera makes the usual noises when selecting Menu etc. It also save picture to the memory card. Is it worth taking it to bits to look for a loose connection?
This sounds like it might be a defective CCD imager, and is a known defect for your particular model camera.. If so, Canon should fix this for you for free if you live in the US, Canada, and a select few other countries. If you live outside the US, ... Canon PowerShot SD100 / IXUS II Digital Camera
LCD monitor does not light up, and consequently, does not display any image (as some other digital cameras do) during the aiming and focusing processes - sort of prescanning the image - before the shutter is half-way then fully pressed. In other words, is the LCD monitor designed soley to display image review (playback) and show menues!
Actually the reason is due to the way an SLR works. The shutter doesn't open up to the CCD device (the digital equivalent of the film) until you press the shutter release button to take the shot. Until then, an angled mirror points the viewed image u ... Canon Rebel XT / EOS 350D Digital Camera
Optio E10 When I turn my camera on I get an error message that says "memory card error", I purchased a new memory card but still get the same error message...any suggestions? I have the exact same problem with my Pentax Optio S7. I turn on the camera and it displays the message Memory Card Error. I have tried several new cards and get the same message. There is an option on the menu to format a card, but you can't access the menu if you have the card installed. It takes great pictures without t
HelloOK, if the memory card itself is locked, you might \012sometimes get this error code. All you need to do is to take out the \012memory card and switch the lever on the left side to the unlock. ... Pentax Optio S7 Digital Camera
The menus keep popping up when all I want to do is shoot photos. How can I better control the display menu on the viewfinder. I'll take a picture and then the display shows up. It ruins the spontaneity of photography. Thanks.
Could you explain in a better way your problem?The XSi don't show the menus on the viewfinder, it only shows on the back screen.You can shut if of by hitting the "DISP" button just at the left side of the viewfinder.You can also ena ... Canon EOS Rebel XSi Digital Camera