Having problems with your Casio EXILIM ZOOM EX-Z60 Digital Camera ?

LCD WAS WORKING BUT WHEN I RE-CONNECTED THE CONNECTOR IT WILL NOT BACK ON


\015 I have a Casio Exilim EX-Z60. The LCD worked fine but the lens would not extend. I replaced the lens with a working lens unit, re-connected both connectors however now the LCD will not come on. Is there something I have done in the process that would cause that? Thanks Gerald\015

Answers :

Make sure ribbon cables for lcd are seated properly.also sometimes these lcds have a seperate small ribbon cable for lcd backlight ,make sure its connected.if lcd only uses one ribbon for both .look behind the lcd and locate the backlight wires and make sure they did not unsolder or disconnected..if ribbons are not aligned or striaght into connector it will not work.hope this helps
May have been static discharge could
have zapped something.This link may
to the mauuals may be of some help
Repair Help & Product Troubleshooting for Casio EXILIM ZOOM EX-Z60 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

LCD WAS WORKING BUT WHEN I RE-CONNECTED THE CONNECTOR IT WILL NOT BACK ON


Make sure ribbon cables for lcd are seated properly.also sometimes these lcds have a seperate small ribbon cable for lcd backlight ,make sure its connected.if lcd only uses one ribbon for both .look behind the lcd and locate the backlight wires and m ... Casio EXILIM ZOOM EX-Z60 Digital Camera

Casio EXILIM ZOOM EX-Z60 problem with not being able to get the LCD working after dis-connection and re-connecting the connectors


The LCD will not show the picture until you put the ribbon all the way inside the connector\015\012Hope this helps\015\012Joe ... Casio EXILIM ZOOM EX-Z60 Digital Camera

DSC-W200 Frozen My W200 has the lens open (extended) and will not close. Additionally, when I press the power button or the play button on the back, the LCD lights up and says Sony, but nothing else happens. I've tried connecting it to my macbook, using a fully charged battery, memory card vs no card, etc. Nothing seems to work. If I press the power button a seond time, the green power light goes off, but the LCD still says Sony. Any help would be greatly appreciated. Not too eager to send it


Try this it works for lens problems like you describe ]]] OK you are probably going to think I am loony giving you this advise But No I am completely sane!Get a can of compressed air OR acces to a compressor at your local gara ... Sony Cyber-shot DSC-W200 Digital Camera

Nikon d40 hi i got my self a nikon d40 all was well for the first 5 days was working well very happy. but then i went to get the d40 out to take some early morning beach shots turned it on and got a white lcd and the camera would not work so took the battery out to check it put it back in cam turned on and worked but still the white lcd and if you turn it off then back on camera wont work unless you push the battery first and still have a white lcd. have taken it to my registered nikon dealer t


Sounds like you got a bad one, i would ask for a new one. ... Nikon D40x Digital Camera

I have a Fuji Finepix S5600 and shortly I got the same problem: zoom error. First I tried the telephone trick but it didn't work. Then I tried solution #10 by LizK76, but how can I separate the back of the camera from the rest. I have to loosen some sort of mini flatcable connectors (of the LCD monitor) but I don't know how to do that.


The zoom and focus operate on screw thread drives. 1 of these has detatched resulting in "ZOOM ERROR" and locked the camera up. Dis-assemble lens and re-attach drive. \015\012 \015\012\015\012Start by removing all the securing screws for the ca ... Fuji FinePix S304 Digital Camera

Hello, My olympus sp-500uz has more and more problems with connecting to my PC. Some USB ports don't work any more(front connection) and the back connection works sometimes but getting my pictures on the PC sometimes doesn't work and if it works it takes far too much time, say about 10 minutes for 8 pictures. Any idea what's going on? Thanks


Many people find it more convenient to just take the memory card out of the camera and put it in a card reader, especially now that these readers are built into computers and printers. That would be a "work around" for your problem. As to ... Olympus SP-500 UZ Digital Camera

Sd110 lcd My LCD did not work, canon repaired it....GREAT! but 2 weeks later it died. It was blank so I send it back and canon says they want money to fix. Damn.. It still takes photos with no problem. I cannot access any functions because the LCD won't work. I've tried the Display button and got the black and white screen of death. I have to take the card out to transfer photos. Canon says"UNIT HAS IMPACT/PRESSURE TO LCD". Do I need a new LCD or what. thanks, steve stokes


I have had my LCD screen go out in my small point and shoot as well, though i did not even bother with my company for the warranty was far expired. You could do a couple things. You could buy an LCD screen off ebay, or anywhere you can find it ... Canon PowerShot SD110 / IXUS IIs Digital Camera

I can turn my sd1000 on, the flash works, everything works. The only thing is that I can't see what's going on through the lcd, but when I take a picture the picture does come up. The funny thing is that if I'm recording a video, I can see what's going on in the lcd. It's only not working during picture taking. Everything else works, it plays back and everything.


... Canon PowerShot SD1000 Digital Camera

My computer is not recognizing my canon powershot sd1100is. this used to work so i do not know what happened. my computer will not download any pics off the camera. when i tried the connect to camera is said to check connection i did. and i also tried to restore my system back to when it did work. it still will not work. any help would be wonderful thank you


What is the make and model no. of your camera, Was it come with any\015\012kind of software, if yes, Than uninstall the software and drivers for\015\012camera from the add or remove program and than reinstall it and replug\015\012your camera. ... Canon PowerShot SD1100 IS Digital Camera

I have got a Panasonic NV EX3EN digital camera.I am experiencing the following problem, can any one solve it out please. menu button not working-wont record or play back....there is a red light flashing o the lCD and a command is comuing up on the LCD screen U 10.when i disconnect the battery and reconnect it , the camera works for few seconds and again stops working.


... Panasonic Digital Cameras

I bought a replacement LCD screen for my Nikon S3000 camera, but when I remove the back case, the connector for the LCD is under the silver plate. I can't figure out how to get the plate off to reach the connector so I can install the new LCD. I've removed screws, but it still lifts only halfway. Is there some kind of trick I'm not seeing to get this thing open?


Hi dear Sir, contact uscamera.com to obtain a repair manual.Regards ... Nikon Coolpix S3000 Digital Camera

I bought a replacement LCD screen, but when I remove the back case, the connector for the LCD is *under* the silver plate. I can't figure out how to get the plate off to reach the connector so I can install the new LCD. I've removed screws, but it still lifts only halfway. Is there some kind of trick I'm not seeing to get this thing open?


Hi dear Sir fishiemnma, remove the broken LCD display lifting it up carefully of retention plate.You did not make? will you have access to the connector afterwards.Regards ... Nikon Coolpix S3000 Digital Camera

Firmware install on Pentax ist DS. Had Ver2.0 & everything worked fine. Simply wanted to upgrade to V2.02 to used SDHC cards. User Power AC and install ran approx 90 secs and displayed showed half way thru Phase 2/2 and then LCD went blank. No 'Complete' displayed. Now camera operates but no back LCD monitor display (top small LCD seems to work) and card seems not to read or write. Camera does release shutter but otherwise camera is not useable, Help!


You need to go to the support section of the Pentax website and engage in a live chat with a service tech using your computer or even a phone conversation to resolve your problem. ... Pentax *ist DS Digital Camera

Hi, i have a sony alpha DSLR- A200 that is working well but now i can't get the menu display to work - when i take a picture i can quickly see the play back on the lcd monitor but if i press play or menu nothing appears on the lcd monitor. Then menu usually will show me battery life, etc but I can't find any of that..I have tried recharging the battery, removing and re-inserting the battery and the memory card and no luck. I can take photos and download them I just can't review anything on the


... Sony Alpha DSLR-A200 Digital Camera

LENS ERROR my Nixon camera was working fine one moment, I was taking pictures and then after I turned it off, I went to turn it back on and it starting zooming and making the urghtt noice as it focused in and out. it does that several times and then the lens error notice shows up on the screen. then i press power and it turns off, but when i turn it back on, the same thing happpens. In the LCD display at the back the image we try to take looks like a pic in a TV with bad signal, I tried to clean


This seems to be a problem with switch and the sensor inside the camera, Some time it works on magicaly like nothing has happend, After having this problem I have to on & off the lens for 3 or 4 times and clean the lens and 3 small holes in the f ... Nikon COOLPIX S200 Digital Camera

I am new to the video world and just purchased a Canon HF S200 from a guy here locally it is used but looked to be in great condition and working properly. But less than 15 minutes after the purchase and only transporting the camera in my car, when I powered the camera on everthing seemed to work properly except the rotating LCD screen would not come on unless you turn it 180 degrees counter clockwise it comes on and works properly. If you start to turn it back it goes off again. When I turn the


Have you got the user manual? If not, you can download it from www.iusermanual.com.I am not familiar with you videocam but the mannual shows all of the buttons and functio ... Digital Cameras

PV-DC152D CAMCORDER, LCD Display only works if it is pulled out, turned 180 degrees and pushed back into place so the display is facing you. If you move the LCD display over 3/4" away from camcorder it will go black again. Personally, I think this is an issue with some sensors that gauge when to turn on the LCD display "ON" and Viewfinder "OFF" and vice-versa. Any help on this would be appreciated since there is nothing else wrong with the camcorder.


The most likely problem is a cracked ribbon cable that goes between the camera and the display. The cable needs to be replaced. Typical cost for this is around $40 or so plus labor. I would not suggest that you attempt this repair yourself as open ... Panasonic Digital Cameras

This camera was working fine, was turned off, and then a day later wouldn't work. The LCD screen on back works only if the Mode Switch is in the review mode (or DOWN), and does not light up under the picture taking mode (or UP) position. Also, while the switch is in the UP position, the ON/OFF power indicator button no longer stays lit. It does, however, stay lit in the Mode Switch in the DOWN position. First problem in three years. Nice little camera.


You may need to take it in to get it serviced or ntry out thees sights on the webhttp://software.canon-europe.com/ ... Canon PowerShot A520 Digital Camera

My camera will turn on and sometime it doesn't even when i put new batteries in it and i have cleaned the the battery parts and battery for good connection. I have to take the batteries out and put 'em in and it only sometime comes on. it still didn't work but even if I put new batteries in it doesn't work just takine the batteries out and put 'em back in only makes it work randomly and the battery on the negative side seems lower than the other like they're unleveled. there wasnt any corrosio


If I understood correctly ..it a 2 batteries camera ...and the reason they are not leveled is cause at one point they was wrongly inserted and forced the cover door to close...and the contact blades inside just bended in on the side of the negative . ... Kodak EasyShare C713 Digital Camera

Canon PowerShot SX100 is : Need to download photos onto computer. Proper connection and did this before. Now, the computer doesn't recognize the connection and a small script on the camera says "Connection Error". Tried it on two different computers and tried different connector cables. Still doesn't work. Thanks for your assistance.


Here are the steps to take.1. Establish whether or not you have\015\012a connection between your camera/computer by going to your start\015\012button, control panel, system, hardware\015\012tab and device manager. The camera must be power ... Canon Digital Cameras

I have a Canon Powershot 5S IS. The image on the LCD screen is not rotating when I rotate the screen, and when I snap the screen into place with the LCD side out it goes from displaying on the LCD to displaying on the viewfinder. It was working properly before, but I can't figure out how to get it back to those settings.


On camera menu, turn on Reverse Disp. ... Digital Cameras

Menu Problem I can take photo's fine, and i get my normal preview on the LCD but when i push the menu button or try play back my images - nothing happens. In fact every button except the wheel/power on off and the "take photo" button is not working??? Nothing i press will work except to take pictures? help! It is brand new, got it two weeks ago and everything was working fine. And nothing happened to it, and i changed nothing.


Did you try calling Canon tech support or returning to retailer if the camera is really not functioning properly this soon after purchase, I'd try returning it once all troubleshooting issues have not resolved the issue.\015\012\015\012Ho ... Canon EOS 400D / Rebel XTi Digital Camera

How to plug back the lcd connector on a ixus 970


If it is a standard ribbon connector that you are trying to reconnect you will find there is a small piece of the connector that either slides up or hinges upwards through 90 degrees. this releases the clip pressure to reinsert the ribbon then closi ... Canon IXUS 970 IS Digital Camera

LCD is not working after connecting the camera to the TV screen


Sounds like maybe the video out socket is stuck, damaged or dirty, without opening the camera you could try inserting the video jack a number of times and give it a gentle wiggle.\015\012 Also resetting the camera to d ... Canon Digital Rebel / EOS-300D Digital Camera with EF-S 18-55mm Lens

Lcd won't work when it is flipped and facing out in the back.


The flip out screen has a position sensor sensor. When you flip the \012screen towards the front, it tells the camera to flip the image \012vertically, so it would be normal. If it doesn't flip, the people in \012front will see the image upside down, ... Canon PowerShot A630 Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.1793 seconds