Having problems with your Digital Dream Company Sportsman Digital Camera ?

New drivers. I have to install each time I connect to PC


Answers :

Repair Help & Product Troubleshooting for Digital Dream Company Sportsman Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have an Olympus X-44, its new and worked fine, but since I had to install a new hard drive this and another digital camera shuts down my computer everytime its connected to my pc, I need the cameras for work and this is causing a great deal of difficulty I need the photos urgently, there are no error messages, there has been a couple of times there is a no connection message but not every time, there has been no problem with any other connection and I use printers and franking machine etc. C


Obviously there is a camera firmware issue. You said you have printers can you see if one of the printers has a set of memory card readers for "Direct Printing these look like Odd looking USB ports but memory cards plug into them. You can use one of ... Digital Cameras

Any time I connect the usb cable camera to computer, the notice: "New hardware found.." appear on screen. After install, some times the computer freezes but mostly nothig happens: No camera, no usb disk (from My PC), nothing. At Control Panel-> System-> Hardware says USB Still Digital Camera with interrogation mark. When I try to reinstall the driver, the program don't find ANY driver, even at Camera intallation CD or at folder with the downloaded driver from Digital Blue. At the little screen o


Please get it here :\012www.drivershq.com/driver-update/digital-camera/disney/\012\012\012Regards, ... Disney Pix Micro Digital Camera

Connection Problem I hope I'm posting this in the right place. I recently bought a Kodak DX4900 & installed the software onto my computer. After taking some photos, I tried transferring the photos to my computer, but it appears that my computer just isn't seeing the camera. I've uninstalled the software & re-installed it, defragged my computer & run a scandisk & the problem still hasn't been fixed. I'm not particularly computer literate at the best of times, and am stuck. I have a new camera tha


I had the same problem with my DX4900. After reinstalling software, etc it finally turned out that the cable that connects the camera to the computer was bad. Kodak has specs for the DX4900 on the ... Kodak EasyShare DX4900 Zoom Digital Camera

New drivers. I have to install each time I connect to PC


Please downloaded it at :\012www.softlookup.com/driveauthor.asp?id=3252\012\012 ... Digital Dream Company Sportsman Digital Camera

I have all the softwares installed in my computer. I have downloaded images no of times. But its not happening now 1) Camera gets connected to computer 2) The window appear on the computer Where i click on ''canon camera window'' 3) CameraWindow displays on Computer & Direct Transfer Menu appears on Camera 4) i click on ''New Images'' on camera, its not transferring If i click on ''Transfer untransferred images'' on Camerawindow on computer, it says ''Folder not found'' what should i do?


Find out where "Canon Camera Window" points to for its default pictures Folder and change that path or create a Folder in the location where it is pointing to ...It seems to be directing the pictures to a non-existing Folder ! ... Canon Digital IXUS 860 IS - Digital camera - compact - 8.0 Mpix - optical zoom: 3.8 x - supported me

PROBLEM CONNECTING A jvc gz-mg334hek hard disc camcorder to my computer, Software is installed ok. When camcorder is connected and powered up my compter says 'NEW HARDWARE DECTECTED'and starts the 'FOUND NEW HARWARE WIZZARD' after a brief attempt at connection the wizzard stops and says 'There was a problem installing your hardware , The Data is invalid' This means i cannot transfer any data from the camcorder to the pc or vice versa - Is there a solution to this.!!!


Hi sixthpistolI would try deinstall the software for the camera, then reinstall it, reboot then try the camcorder again. Be sure to install the software BEFORE plugging in the gear. I am more than happy to answer any other question ... JVC Digital Cameras

Connection Error I'm having a hard time connecting my A730 Digital Camera to my PC. I tried the arcsoft installer as well as installing the is730 enu (an OS camera driver for Windows 98, 2000, and XP) and yet the camera is not being recognized by the PC. I also followed the instructions posted in the GE support website (including the FAQs and technical support advisory) and yet it still fails the connection. Please help... Thank you.


The Arcsoft CD will not help you as it is not a driver disc. No driver disc is needed. Sometimes the camera gives a false connection error message. The easiest way to tell if it is connected is to go to My Computer and see if any Removable Discs s ... GE A730 Digital Camera

My camera will not connect to my laptop. I have had the camera for about 9 months and not had any problems with it before! Every time I plug the usb cable into the laptop the camera say " processing - computer connecting and then connection fail. I have un-installed and re-installed the software but to no avail. It simply doesn't seem to recognise the camera anymore. I have no idea why this is happening and it simply will not work. It is very frustrating. The troubleshooting section of the manua


Most of the time, Windows update is at fault. Pros avoid this problem by using a card reader for downloading their pics.\012 ... Pentax Optio M85 Digital Camera

Install new batteries,within minutes of useage battery indicator starts flashing & short time later camera says change battery &camera shuts off. first 3 yrs batteries would last for weeks, i could take a1000 shots plus view edit etc. i tried new charger &batteries ,non rechargeables plus i changed the internal battery for date& time,took camera to shop and had it checked for shorts and discharge problems they said everything was within specs.i have been told all canons do this after 3 or 4 yrs,


... Canon PowerShot A710 IS Digital Camera

Software Hello Sir/Madam, I bought the a Benq Digital Camera 1300, some time back, But unfortunately I Lost the Installation CD. Now I bought a New laptop (Toshiba) and I would Like to install the camerea on my new computer. Is it posible to find the Software? Robert from Uganda


What kind of software do you need?\015\012For downloading the pictures, you do not need special software. It is plug and play in Windows XP and also Vista.\015\012If you want to retouch the pictures, there are many freeware available in t ... BenQ DC1300 Digital Camera

Hi there. I am having a problem connecting my Canon Powershot A630 camera to my computer. My computer is running Windows XP and I have installed the software that came with the camera. When I connect the camera to the computer via USB cable the computer says "Found new hardware - Canon Digital Camera" and then the "Welcome to the Found New Hardware Wizard" opens up. It says Windows will search for current and updated software and then tells me to insert the Compact Disk labeled Windows XP Profes


Hi there,If\015\012 you want to download the pictures on your camera, try plugging it into \015\012the usb port of your computer using the usb cable. Then turn on the \015\012camera and make sure it is set to REVIEW MODE. Usually, ... Canon PowerShot A630 Digital Camera

Good day, my name is Antonio Gelsi, on January 07 2011 Ihave purchased my new Leica X1 from Lica Dealer in Hamburg : MEISTER CAMERA EPPENDORFER LANDSTR.64 20249 HAMBURG TEL 040 467 77755 - CAMERA MODEL IS : LEICA X 1 NR 18400 / FABR NR 03836794 I would like to connect my new camera to my MAC Lap Top or other computers and I did not find the CD in order to install the Leica Camera on my computer. Today I called Leica Hamburg and I was told that I have to install the program or software


The company has told you to download the software. You can do this from the support section of their website. As the Nike slogan says..."Just Do It". ... Digital Cameras

Two flash memory cards have pictures on them yet the pc says there is nothing on the cards. i have done a complete uninstall and new install and the problem persists. first time we have ever had an issue with the camera after nearly 10,000 pictures. camera hasn't been dropped. the prongs accepting the flash memory cards are not bent. no new software has been installed recently except bing interface for internet explorer. any suggestions are greatly appreciated. terry


Use a separate card reader. ... Nikon Coolpix 4300 Digital Camera

Just tried to hook up my camera to my computer and the computer is not recognizing the camera for some reason. Is it possible that the USB cable is bad. I am not getting an error message and we have done this many times without the software installed. We installed the software that comes with it and it wn't allow us to do it either. We just downloaded norton antivirus 2009 to our computer and this is the first time we have tried since doing that. I think the USB cable is bad but it's pretty new.


I think the USB cable is bad or ur USB port might be loode.. ... Canon PowerShot S5 IS Digital Camera

Lens Error I recently had a problem with my Casio QV-R4... every time I'd turn it on, the lens would retract and I'd get a "LENS ERROR" message on the screen. I talked to customer support and they told me that Installing the new version of their firmware, v1.01 would fix this problem. I've since installed the new firmware version, but I am still receiving the lens error. Has anyone else encountered this problem? Does anyone know how to fix it? Please help!!!


As solutions 1 & 2 indicate, lubing the gears works!! This is a great camera, so I hope all of the QV-R4 owners try this. I may become a maintenance item for the camera.\015\012 \015\012I have a few a ... Casio QV-R4 Digital Camera

Fuji s9000 problem, it won't turn on with the ac supply at all. The last time I used my camera I put in some rechargeable batteries (new ones) while the camera had the ac adapter connected, I was just seeing if the new batteries had charge on them or not. Well, after a while I came back to my photo booth and my camera had a white screen (lcd) and so I unplugged it at that time thinking maybe it was charging the batteries or something. Well today around a week later I am not able to turn my ca


... Fuji FinePix S9000 Zoom Digital Camera

I have a sony handycam dcr-TRV70 and I have installed the the installation disk ver.1.5 image mixer and winASPI for win XP. I HAVE winXP,sp3.When i turn on the cam selector switch to VCR,WINxp "FOUND NEW HARDWARE" APPEARS but it doesn't recognize or complete installation since it can not find file:sony dv-vcr then it aborts and error message:can not install".I have the i-link IEEE 1395 CABLE CONNECTED BETWEEN THE CAM AND THE COMPUTER.i recently HAD A COMPUTER CRASH AND RESTORED-IMAGED to THE A


Http://www.tomshardware.com/forum/53160-5-vista-sony-handycam-firewire-problem\012\012\012When you downloaded SON ... Digital Cameras

Relatively new canon eos 60d. Was taking multiple pictures in a group setting. Received an error that the lens and the camera were not connected well (I receive this from time to time, need to buy a newer lens). Usually, I just turn the camera off and then back on and it works fine. This time, the view through the viewfinder is very dark and it will take no pictures of any kind. Tried everything I know- no luck.


Hi,\015\012What lens exactly are you currently using? Have you tried cleaning the contacts on the lens as well as resetting the camera? ... Canon EOS 60D Digital Camera

We have installed new xD-Picture Card M2GB into Olympus Digital Camera Model No. C-750 Ultra Zoom not work, Screen mentioned Card Error I purchased a 1GB Sandisk (used camera) but when I power camera on I get a "Card ERROR" message. The very first time I powered up I programmed the date and time....but then got the error message. Now I get it every time I turn it on. I don't have another card to test it with:(


Go here\015\012http://www.casio.com/home ... Casio QV-R40 Digital Camera

I have the Aiptek Mega Cam (also known as Aiptek Pencam 1.3) together with the install disk. I can install all fine in Windows Xp but no way to have it done in Vista. When i put the disk in my vista PC, it installed Mega Camera Manager but when i opened it always show " The computer can't connect to your camera!". If i do the same in Windows XP everything goes smoothly and it show pictures is inside the camera. Event when i try to brows the driver when vista open the window says "found new hard


... Aiptek PenCam Mega 1.3 Digital Camera

Date/Time stamp shows on pics fine but when I connect to pc with usb they all default to 1/1/2000. When I connect the usb cable into my camera the screen display reads "setup date/time usb connected" but at this point the setup buttons are frozen in both set up mode and playback mode. I want the pictures to transfer to the pc with the valid date that they were transferred on. Each time that I clear the internal memory or the memory card the camera starts naming the new pics with the same name as


... Moultrie GameSpy 4.0 Digital Camera Deluxe

Hello, I recently purchased the Canon powershot sd1400. I connected the camara to my computer for the first time to download my pictures and it worked. Now i tried to do the same but my computer no longer recognizes it is connected. I then installed the software(disc) and reconnected the camara. I attempted to open the camara window but I keep getting the error message that reads "can not detect camara. please check connection and try again." I've been doing this for hours and still no luck.


If you have another USB port, try it. You can easily solve your problem by getting a card reader...they always work. ... Canon PowerShot SD1400 IS IXUS 130 Digital Camera

Canon 450D is not being recognised by my computer (I run xp 32-bit). When I turn on the camera, windows comes up with a "install new hardware" option. I have installed the EOS utility etc. but still the camera isn't recognised by my computer. Anyone have ANY idea? This also happened with my 350D, the only time my computer recognised the camera was when I installed the software package included with the camera. Nothing off the Canon site worked for my 350D, and so far nothing is working for the


Both the Canon XT 350D and the XTi 400D are recognized by any PC with XP windows operative system. It seems you have to check your USB port or USB cable used to connect your cameras to the PC. Sometimes, the PC does not recognize a specific device co ... Canon EOS 450D Digital Camera

I have a Sanyo VPC-S880 Digital Camera. When I first got the camera it was great no problems at all, then out of the blue about a month later, I connected it to a USB cord which was connected into my computer(like any other time) to download pictures. Well the camera shut off and I can't get it to turn back on. I have put new batteries in it & everything, I just can't figure it out. I love this camera, please help??


Take it to sanyo service,since it is the failure of mother board of the camers ... Sanyo VPC-S880 Digital Camera

Finepix Z20 fd - i am trying to download pics from our new camera. this is the 2nd time i've done this.the first time sucessfully. i've connected the camera to the usb port but the application isn't coming up. i searched my hard drive and can't find it. since i can't find the box with software, can i download it from the internet? if so, where? thanks.


Like I told another person on here with a similar problem, you don't have to use the software that came with the Fujifilm. I have\015\012the same camera. If you're on a laptop that has a slot for SD cards,\015\012(if you have an SD card) you can just ... Fuji Finepix Z20fd Digital Camera
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.2491 seconds