Having problems with your DXG Technology DXG-305V Digital Camera ?
Can I update the OS on a DXG 305v digital camcorder to be able to read more than 512 MB? Can it even read and HCSD chip?
\015 I have a 16 GB HCSD chip I'd like to use so I can just swap it to and from my Black berry.\015
I assume you mean SDHC. DXG does not have a firmware update for this camera. The differences between SD and SDHC involve hardware. If a device was designed to work only with SD cards and not with SDHC cards then no amount of firmware updating will change this.
Repair Help & Product Troubleshooting for DXG Technology DXG-305V Digital Camera
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Can I update the OS on a DXG 305v digital camcorder to be able to read more than 512 MB? Can it even read and HCSD chip?
I assume you mean SDHC. DXG does not have a firmware update for this camera. The differences between SD and SDHC involve hardware. If a device was designed to work only with SD cards and not with SDHC cards then no amount of firmware updating will ch ... DXG Technology DXG-305V Digital Camera
I want to replace the memory chip in my Canon PowerShot SD1100 IS camera with a larger one but leave the photos taken on the original memory card on the camera. I used my computer to first read the photos off the original chip, then to write them back to the larger chip. When I put the larger chip in the camera, it shows no images. When I read the chip with a card reader, I do see the images. I want to be able to see those images on the camera (so I can use it as a viewer to share my photos
Hello.First of all make sure you have a copy of all your pictures in your computer. Then format the new card USING YOUR DIGITAL CAMERA. After that, transfer the pictures to your SD card from your computer and make sure that you did ... Digital Cameras
I was trying to copy some videos from my new Panasonic Lumix FZ28 to my laptop for the first time, using usb mode. I was able to view the videos on the camera & on the laptop & copied a couple of still images, but when I tried to copy one of the quicktime files it said there was an error as it could not read the file. After that I have not been able even to turn off the camera - it seems to have frozen & removing the usb & plugging it back into the pc just says the equipment has malfunctioned. I
Remove the battery and re insert again from the camera... ... Digital Cameras
My HP Pavilion 9000t cannot seem to detect my Canon ZR830 camcorder. Even though the Canon shows "DV IN" when I connect the firewire, after using system restor to roll back prior to Windows update, and after updating the IEEE driver in device manager, the computer can't find it. Annoyingly enough, I was previously able to "see" this camcorder on my computer. No help on the Canon site, and no help on the HP site either.
First check if other USB device is working in the USB slot on your computer. Disable the anti virus or firewall from the system and then connect cam corder . ... Canon Digital Cameras
As I am scrolling through the pictures on the camera, a "read error"message comes up. This is occuring with all of the memory chips - even the new ones so I do not think it is a chip problem. Can you offer any advise, or is it time to have the camera serviced.
You have two slots for memory cards .. one for XD and one for CF .. if you have trouble with one slot then you can try the other type card .. if you are using a CF card or micro drive .. then look into the slot where they normally go .. l ... Fuji FinePix S7000 Digital Camera
Message Display I have a 256MB memory card for my camera. I have not taken many photos. Even at the lowest picture quality setting of 640, the camera reads that I only have 146 images to take. When I try to review what is in the camera, I receive the message "No Valid Image to Play." The instruction manual explains that the message means. However, I was not able to find anything that tells what to do to increase the number of available photos from 146 to more. This problem happened once
You should have the full instruction manual!! ... Panasonic Lumix DMC-FZ10 Digital Camera
My Jazz DV142 will not read my SD Card. It worked fine at Christmas time, but now it will only function with the card removed. I have tried different cards, and even purchased a new one. I know the unit will not support anything larger than a 4GB card. Is there a firmware update that will correct this problem?
Have you looked closely at this card to see whether it has a "read only" protection switch?\015\012\015\012Some of these memory cards do have such a switch on them, on an edge, or near a corner. They are very difficult to notice, but the ... Digital Cameras
I have a Cobra camcorder.It came with 2 memory cards, one that records 16 minutes, and the other that records about an hour and a half. I put the chip in that had more space and went to use it at my daughters school play. The screen reads- MEMORY FULL, but I didnt even record anything. Ive ried to fix it many different ways, and i need to use it tomorrow on christmas! CAN SOMEONE PLEASE HELP ME???
First see if the card has any device for locking on it ...than if you can put it on the computer ...just do it and format the card ...(go to my computer ...find it ..right click on it ...and format ...) try to see if the card is ok in the camera afte ... Cobra Digital DVC960 Digital Camera
Batteries As a new owner and a relative camera novice, what is a firmware update and can it solve my misleading battery indicator reading or make my rechargables last even for a reasonable amount of time please?! Thanks Dave K
Lithium AA batteries will make a HUGE difference in the amount of pictures you can take before you need to replace. Don't bother with the firmware update for the battery indicator until you've switched over to the Lithium batteries. They are relati ... Vivitar ViviCam 8400 Digital Camera
Card Error None of my 3 memory cards are being accepted by my camera all of a sudden. I get a Card Full message, but when I try to view the images, the screen reads No Images. I've tried to format the cards again, but get a Card Error message. I've updated my firmware. The manual doesn't offer any suggestions for this error that I seem able to repair on my own. Any ideas?
If you are using a card reader for transfer to the computer, it is possible that you are corrupting your memory cards by accident (you have to make sure to eject the cards before removing them from the card reader). Try a new card and see if it will ... Olympus EVOLT E-500 Digital Camera
We insert a memory chip into our Kodak EasyShare C190 camera. The read-out informs us that the memory card requires formatting. We click on "OK." The camera goes into a "formatting" mode, then informs us that the memory card cannot be read. It goes back to the "Memory card requires formatting" prompt, we click on "OK," it goes back into the "formatting" mode, then tells us again that the memory card cannot be read. We can't do anything else with the camera until we take the chip out, then we hav
Your camera is only supporting SD/MMC Cards (up to 2 GB) and KODAK SDHC Cards (up to 8 GB). \015\012The card that you currently have might be faulty. Please try another card.You might also need to switch the camera over to saving pictures ... Kodak Easyshare C190 12MP Digital Camera with 5x Optical Zoom and 2.7-inch LCD
I change out the batteries between the rechargeable ones it came with and double A's. I can get it to read the internal memory if I use the cord and connect it to my computer and select reformat. Even if it tells me that it is protected. The lens will not close even after you turn the power off or if you go to review. I tried different memory, changed batteries and read about trouble shooting. It worked perfectly before.
... Sony Cyber-Shot DSC-S90 Digital Camera
My Kodak C190 will not read the card. I cannot format it in the camera because IT WON'T READ IT IN THE CAMERA. I keep seeing the same answer - "format in the camera" - but it can't read it. Now what ? I have I tried three other cards of varying sizes - 2gb, 4gb, 8gb, and 16gb - none were able to be read. The camera works fine with its internal memory, but that doesn't hold much at all. Any help would be great - Thanks
Can`t you format it on your PC ... Kodak Easyshare C190 12MP Digital Camera with 5x Optical Zoom and 2.7-inch LCD
I just purchased a Kodak printer to print my digital pictures. When I try to look at the pictures wheather the memory chip is in the camera or directly in the printer it will only read 46 of the 200 or - pictures on the chip. The chip is fine in my old Lexmark printer and my chips from my old sony camera work fine in the new printer? It is a Kodak 5300 AIO printer
Try to sort your pictures by folder. On your computer, open your pictures on the chip. Create different folders like 3 to 4 folders and distribute your pictures there. Then check if it your camera or printer can read all 200 pics. ... Fuji Digital Cameras
After having my memory card fill up I uploaded the images to my computer. After uploading I placed chip back in the camera and deleted all images - which it said it did successfully. Now I can only take 3 pictures before it says it is full again because it is now not reading / or saving the images to the chip but rather the camera. Also after re-inserting the chip back into the computer I see that it in fact did NOT delete the photos from the chip although it said it had (and I am unable to view
You can simply delete the photos from your computer instead. Simply drag all your photos to the recycle bin in windows or trash can in mac and then empty it. This will delete everything you have on the card. ... Casio Exilim EXZ75 Digital Camera
My camera was diagnosed with a bad ccd chip by a repair facility (circuit city) I was able to get it back before they closed the doors. I bought the replacement chip directly from JVC parts, now heres the situation, I can work on electronics but I don't want to just start busten it apart looking for the chip. Need help with instructions. Is this something that yall can help me with?
No you don't do it yourself. working on electronics has different skills and expertise, as I have said it was not advisable for you to open the unit cause camera technician has an special tools servicing the unit. it can only result a damaged on the ... Digital Cameras
Photo transfer I have a Sony Vios running Vista. I have a casio exlim 550 camera with an SD chip. When I put the chip with photos into the SD reader slot I get a message say Photo Gallery cannot read the photos in their format. When I put the SD chip back into the camera and the camera into its charging/transfer base plugged into a USB slot the photos transfer just fine. I need the pics to transfer through the SD slot on the front of the Vios. Anyone have a fix to this? Thanks. Dave
Change the pic format options in the camera to read *.jpeg intead of *.raw\015\012\015\012if they are in jpeg maybe the computer dosn't understand the way the camera formated the sd card mine dose the same thing when i try to tranfer imag ... Digital Cameras
My Kodak M530 had been working alright since I bought it on December 2010 but suddenly stopped reading the SDHC card about a week ago. The card is fine because I can read the content from my Mac. Everything else is fine with the camera but, since the removable card is not being read, I am not able to store more than 7 pics on the internal memory... :-(
Using the internal memory locks some cameras into that mode. To get your card to work again, do this...with no card in the camera, go into the menu and find "format" and follow the on-screen instructions to erase the internal memory. Then, re-insert ... Kodak EasyShare M530 Digital Camera
Firmware updates I currently have firmware v1.2 and i think its in need of an update. Does anyone know where I can get the firmware updates? I looked all over www.nikon.com and couldn't find it. They don't even have the camera listed! www.download.com doesnt have it either
Current firmware revisions for all Nikon products can be found athttp://nikonusa.com/Service-And-Support/index.pageClick on "Niko ... Digital Cameras
Lens Problem I got a new Kodak EasyShare C613. The lens just won't go in and it shows lens errors 10e,1,0,0 and 20e,1,0,0.There was no mechanical shock imparted whatsoever.I was trying a SanDisk SD card. The lens opened and it just won't go in. Please help. I got the camera shipped from the U.S so even warranty won't work.
Okay, Kodak is a load of **** if they won't allow warranty on an item that doesn't retract. And I got an SanDisk SD Card like you, and on most of my pictures it says, "FILE FORMAT UNRECOGNIZABLE." You should Email Kodak and talk to them about that wa ... Kodak EasyShare C613 Digital Camera
I have a Nikon D300. I can't seem to figure out what's wrong, I assume it's a setting issue. In low light situations even with the flash I can't seem to stop action or even properly light things. I have had any kind of issue like this on a camera before. In situations where I should be able to handhold I am using a monopod. I know there is enough light to not have to handhold, I mean I am using the flash. Frankly even with available light this should not be an issue.
Hi there will you please check the exposer settings? If its in not under then go in camera settings from manu & reset the camera settings. After that if yu face the same problem then there is few reason can happens. 1. your Flash hood not sence t ... Digital Cameras
Hi, I lost the disc for installation of drivers for my camera. After reading about the updates to the drivers, I checked my camera and find that it has not been updated. Can I just upload this updated driver from the web without actually having the original installation disc? If not how can I obtain another installation disc? Thanks
Yes just download the software at casio. You do not need the disk to get the software. You can get it at there website.\015\012\015\012Good Luck and Please Rate FixYa! ... Casio EXILIM ZOOM EX-Z600 Digital Camera
D60: I just got back from Certified Repair group where they said the camera is "okay". The Problem: It's like the ISO has shifted, and the readings on P, S, A, even M all result in a long exposure/wide open aperture reading. Frequently the reading is such that the shutter will not release, due to no focus or wrong light amount. Frequently the focus "peep" does not go off, and so the shutter will not release. Two weeks ago it was fine, don't think I changed anything, but it's like a setting is
Have you tried going into the menu and finding "reset"? ... Digital Cameras
When i turn on my camera(md853)the screen reads "lens error 1 of 1,0,0"what s the problem?
Try these procedures. ... Kodak EasyShare M853 Digital Camera
Hi, I have the olympus Stylus 790 SW. It was dropped yesterday but it was barely a fall. Now the camera wont read my picture card it says "card error". However the card itself is fine because i was able to upload them on my computer and put my card into a photo printer and have no problem. The camera is able to take pictures but only with the internal memory now. I am trying to figure out what happened?
Reformat the camera ... Olympus Stylus 790SW Digital Camera