Having problems with your DXG Technology DXG-503 Digital Camera ?

My DXG 503 camera stopped working. When I go to take a picture it says card locked. Which it wasn't. I even bought a new disk for it just in case something went wrong with the disk and even with the new disk it says its locked. Any help with the stinkin' thing??


Answers :

Hello

If the card works in another camera or another card doesn't work in your camera , the problem is with your card reader in your camera.

If you open you sd slot and look inside with a sharp light , you should be able to see on the left side of the slot there is a little copper or spring steel lever switch. This switch work as follows:

1. When no card is inserted / no write protection , the switch is open and thus the protection is off.
2. When locked card is inserted , the tab is depressed and tells the camera that the card is lock.

Contrary to popular belief ,the little tab on the sd card is not an electronic switch and does not physically influence the card operation itself. If you put a locked card into a camera without a sd lock switch , you would still be able to use the card normally.

It is incredible difficult to fix this switch because of space limitations in the sd card. Look into the sd slot and if you can see the switch , use a needle to pull the little tab down toward the base of the camera by about 2mm or until it works being careful not to bend it.

If this does not resolve your problem , there might be a short in the switch circuit and the camera will need to be disassembled to resolve this error. This should cost no more than $50.

Please feel free to contact me if you need further information

Kind regards
Andrea
Repair Help & Product Troubleshooting for DXG Technology DXG-503 Digital Camera

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My DXG 503 camera stopped working. When I go to take a picture it says card locked. Which it wasn't. I even bought a new disk for it just in case something went wrong with the disk and even with the new disk it says its locked. Any help with the stinkin' thing??


HelloIf the card works in another camera or another card doesn't work in your camera , the problem is with your card reader in your camera.If you open you sd slot and look inside with a sharp light , you shou ... DXG Technology DXG-503 Digital Camera

Format error my cybershot was working fine until i went to buy a new memory stick. i tried inserting it and then the screen said format error. i even tried formatting it again, even if it said everything will be erased.... but still it did not solve the problem. format error with disk. It worked fine for awhile. when disk is out it is saying that internal memory is full, but I can only view one picture.


Hmm sounds like you may have gotten corrupted..ok here is what you do..1.) connect the camera to the computer via the usb cable2.) go to My computer and you should see your camera show up as an external drive.3.) r ... Sony Cyber-Shot DSC-S500 Digital Camera

Hey. I bought a new camera some days ago with a new Digix 4gb SDHC memory card. I went to Disney World and took normally a lot of pictures. From one moment to another, the camera gives me the message "Memory card error" and won't let me take nor view pictures. I tried removing the memory card and everything. I checked and It isn't locked or something. Also, I tried using a memory card reader on my laptop, and it says I have to format to read the card. I REALLY don't want to lose the pic


The first thing that may be complicating things is, can your laptop read SDHC cards, or just SD cards? If the laptop is asking you to format it, then probably it's working, but be really sure, before you continue.Check the co ... Digital Cameras

Hey. I bought a new camera some days ago with a new Digix 4gb SDHC memory card. I went to Disney World and took normally a lot of pictures. From one moment to another, the camera gives me the message "Memory card error" and won't let me take nor view pictures. I tried removing the memory card and everything. I checked and It isn't locked or something. Also, I tried using a memory card reader on my laptop, and it says I have to format to read the card. I REALLY don't want to lose the pictures.


Take the card to a Walmart and insert it into one of their picture kiosk machines. You can print the pictures or even make a CD of them. ... Canon PowerShot SD1300 IS IXUS 105 Digital Camera

Was loading pictures from SD card and frame appeared to lock up. It went blank and will not respond even after turning on and off and unplugging for a long period of time. Tried a different card -- nothing -- no response. Called technical support for Smartparts and she had me connect it to my computer -- computer did not recognize any new hardware. Warranty is only 90 days and I've had it six months. Smartparts tech support says there is no repair available. HELP!! Thank you. Barbara


Please try it in another computer.. if it works it detects on another computer then the problem is with ur computers USB . that can be rectified. \015\012\015\012even try these steps which may work for u.\015\012 ... Digital Cameras

"Card Locked" The "card locked" message keeps coming up even though my memory card is not locked. I bought a new memory card, and put that in, but it still says "card lock." I even put new batteries in, but still "card locked." So I know it's the camera, and not the memory card. What do I need to do?


Hi!There's a small switch on the memory card reader inside the camera which detects that the card is locked. Most likely this switch is broken. You can try to point it with needle or something but I'm afraid you will have to give it away for a ... Canon PowerShot A590 IS Digital Camera

My hp photosmart m737 say card is lock and its not locked even bought a new card and samething


... HP Photosmart M737 Digital Camera

When I turn on my camera it say my card is locked and I manually switched the little switch on the memory card however it still said it was locked so I bought a whole new memory card and it still says its locked even after I switched the little side thing.


There are several possible causes for "memory card locked", "memory card error", or "no memory card". Some include trying to use of a 4GB SDHC card with an older camera made before SDHC format came out. Others include problems with the tiny slide swi ... Canon PowerShot A590 IS Digital Camera

I have akodak easyshare c633 camera have had it for bout 3 years with no problems.Ive decided to purchase a new memory card for it instead of just putting prints on a cd at walmart.The full card is a lexar sd 512mb,the new card isan sdhc sony 4gb.when i try placing it in camera it says it needs to be formatted continue or cancel so i continue but it just keeps saying this can i not use this card with this camera or am i doing something wrong?I no longer have a manuel to this camera soo help ple


Your camera cannot use SDHC cards....only SD. If you copy and paste this address into your browser, you can download a copy of the owner's manual.\012http://www.kodak.com/global/plugins/acrobat/en/service/manuals/urg00634/C633_GLB_en.pdf ... Kodak EasyShare C633 Digital Camera

My camera keeps saying my batteries are drained, even though they are brand new. I've done those with 5 pairs of batteries already and yet, it keeps saying their dead. Now it wont even take photos anymore. What's wrong with it?


Hello : \015\012\015\012Maybe you need to check the base where the batteries are set . It must be rusty or there's isolation stuff on it . You need to clean the base . If that didn't help , then I recommend you to take your CAM to a repai ... Panasonic Lumix DMC-LZ2 Digital Camera

Every sd card that i put in the camera it is saying the card is lock. i have tried and even buy a new caed but still saying that the card is lock how can i fix this problem thanks


Hi:Make sure that the little lever or slide switch on the side of the card is in the right position.As you look at the card with the contacts facing down, the switch should be set to the lowest position.The SD card can be set to wri ... Pentax Digital Cameras

I have a canon powershot sx200 IS and I recently went on vacation and took a lot of pictures using teh SD memory card provided with the camera. For some reason, after almost filling the card I received a memory card locked error. I checked the card, it was not locked. I even tried in another camera and same error. So I got a new SD card, took more photos and then all of those photos were erased. I could not find them when reviewing on the camera, another camera, or even with a USB card reader. A


The likely reason this keeps happening is that these cards weren't formatted in the camera when you first got them. However, don't do so just yet as formatting also erases the card. If you are using a memory card, take no more pics until you've reco ... Canon PowerShot SX 200 IS Digital Camera

Brand new S230, son changed "language" to something foreign. Can't even navigate menus to change back to "english" cause menus are in wrong language. Can't even do a "reset" (for same reason), and don't if that would even work? Thanks---kelly


Hi,You could Download the Manual from :-http://www.nikonusa.com/pdf/manuals/noprint/S230ENnoprint.pdfNow,There are 12 Languages here. So Press Menu button. There would be 2 Tabs. Go for the Lower One. 5 ... Nikon COOLPIX S230 Digital Camera

Got a new memory card, camera says it needs to be formatted but won't do it. When card is removed the camera still says it needs to be formatted then says card is "locked". Can't take any pictures. Before this kept getting no memory messages even after deleting pictures


Does the card have a slide switch on the side? ... HP Photosmart 735 Digital Camera

CAPACITY Problem I am using a 2GB Kingston CF card on my S9500, and at 5MP it can store up to 1000 pictures. Recently I had it formatted on a computer and when I inserted it back to my camera, the capacity went down to 590 pictures! i thought it caught a virus or something so I scanned it, then formatted it on the camera. but the display still says I got 590 shots left. so I reformatted it on another PC, and on Properties it says 0 usage so i'm positive there's nothing wrong with the card. Now,


1. Connect your camera to the PC.\015\0122. Download the latest firmware\015\012 http://www.fujifilm.com/products/digital/downloa ... Fuji FinePix S9500 Zoom Digital Camera

When i turn my S2980 on it says please turn off an turn back on ive done that an even tried new batteries but i still get the problem an the manual dont say whats wrong either


... FujiFilm FinePix S2980 Digital Camera Black

Hi, I have a Canon PowerShot SD1100 IS. It says the memory card is locked every time I insert it even though it isn't. I tried several cards to eliminate the possibility the card was bad. I received a repair estimate at $79, because the card reading board needs to be replaced. Am I being scammed or is it a fair estimate? Is it worth it or is it better to invest in a new camera? This one is not even 2 years old...


... Digital Cameras

My sandisk sd card isn't working in my camera. My camera is a vivitar 5024 camera, everytime I try to take a picture it says memory card is not ready, it says switch to internel ram. This memory card is brand new so what is the problem? No it is not locked i've tried that already, i've tried to figure out what's wrong for a long time now. Does anyone know how to fix this problem? Additional information: The sd card is only 2GB.


Have you tried to format the card.\015\012\015\0121. \015\012Start up a computer with Windows XP, Vista, windows 7or Insert the SD card into an external memory card reader or into the computer's built in card reader. If i ... Vivitar ViviCam 5024 Digital Camera

My new vivitar 5018 only stays on for about 5 mins before saying low power goodbye even with new batteries. Am I doing anything wrong?


Look through the setup menu for the time to go into shutdown/standby mode.  If this is why the camera shuts down (i.e. 5 mins set) then change it.\012In standby mode almost all cameras come back to life with a press on the release button. ... Digital Cameras

Hi there. I've just bought a remote shutter/controller JJC JR Series Infrared Controller,for my Panasonic DMC FZ50,but it doesn't work at all. I don't know if I'm doing something wrong or if is the gadget that is faulty. I don't know if the light on top of the receiver should be on,because is always off(no light); I don't know if I have to program something in the camera before connecting the device; I don't understand why even if I do everything as the instructions say,nothing ha


Hi,\015\012\015\012With this camera you need to activate the power save mode or the remote will not operate.\015\012\015\012To activate it do the following\015\012\015\0121) Press menu set and then press the left a ... Digital Cameras

Canon Power Shot Digital Elph (SD600) says memory card error? I bought a new card...thinking that was it and it says card locked...even when I push it to unlock on the card?


... Canon PowerShot SD600 Digital Camera

Wjen i put in the memory card it says there is something wrong with it however when it said it at first i bought a new one and it said the same thing with the new one


Try using the original memory card when you bought the camera. If this works, the last ones are defective and need to be returned or replaced. If you don't have the original memory card anymore, try to borrow one from your friend that has the same ca ... Digital Cameras

Communication error When i connect my Fuji Z100fd to the computer with the USB lead i get a blank white screen with just a USB icon in the top left corner then after waiting a while it gives a red exclamation mark and says communication error. i think something went wrong when i accidentally clicked something when i was in the middle of deleting photos from the camera whilst still plugged into the computer


Sounds like you have corrupted or possibly deleted a Fine Pix Viewer driver software file.Suggest you uninstall and reinstall Fine Pix Viewer.Before you start you might want to create a backup folder on your C drive and put co ... Fuji FinePix Z100fd Digital Camera

Windows Vista!!! When I plug in my cord from the camera (Pentax Optio S5i) to my new laptop with Windows Vista I get a message saying it can't locate Pentax driver and this isn't supported by Pentax??? or something like that.  My camera is not that old.  Is there any way I can get my camera to work with Vista?  I can't even get it to recognize the camera when plugging it into the USB port so it's not a software issue.  HELP I do not want to have to buy a new camera!!!!


There's quite a simple fix to this. Disconnect the camera and turn it on. Press Menu and move to the the little 'tool icon' tab. Under 'USB connection', change the setting from PC to Pictbridge. Press OK. Connect your Optio to your P ... Pentax Optio S5i Digital Camera

My pentax optio 60 shuts down right when i turn it on,says depleted batteries and i just put 2 new ones in there. 2 new duracells and they went dead after 1 pic and about 15 minutes later. even my 2600 milla amp rechargable ones die, but not that fast.


... Digital Cameras
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.lionebra.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3421 seconds